A mech game prototype, pushed by Gemini 4 Argon
agent
+1:06:58reasoning
The images show flight path turns. The angles provided, 45, 315, 135, and 180 degrees, represent course corrections during flight. Considering the image data, it seems possible to identify the flight path based on these turns, potentially outlining a route or maneuvering pattern.
The visual details, including the pauldrons, cockpit, shields, and thrusters, are well-defined. Examining the exhaust levels function in the source code might reveal opportunities for optimization or refinement in the rendering. The goal is to identify areas that can be improved within a short timeframe.
The nozzle firing behavior appears directly linked to the input vector's components. Specifically, the "calf" nozzles activate only with positive y-axis values, signifying lift, while the "binder" nozzles are more responsive to both x and y components. This explains the observed nozzle behavior in the provided images and suggests control inputs directly influence thrust output. Further experimentation with specific vector inputs in the viewer tool should demonstrate simultaneous firing of all nozzle groups.
The calf thruster nacelles appear partially obscured by the rear calf flare, necessitating adjustments to their position. Repositioning the rear calf thrusters to protrude more prominently would ensure their visibility and plume clarity. The leg stance issue in the images is due to a narrow leg angle setting in the joint configurations.
The current joint configuration data reveals that the left upper arm and forearm are positioned at specific coordinates. Modifying the kestrel_joints() function to create a wider stance, using adjusted hip, knee, and ankle angles, might establish a more distinct heroic A-stance silhouette. If these angles were progressively set (hip x = 1.25, knee x = 1.62, ankle x = 1.98), the limb plates would automatically splay outward by 4.7°. Centering the foot on the ankle joint with the specified ankle angle would increase the leg width to nearly 4 meters, making it more pronounced than the current posture.
Initial observation: Kestrel's position relative to the camera flips between flight and turn images due to the yaw angle. A consistent positioning scheme could improve viewer clarity. Investigating the yaw angle and camera orientation reveals that when Math.cos(yaw) < 0, the camera is behind the subject. A potential solution involves adjusting Kestrel's and Striker's positions based on the camera's yaw angle to maintain a consistent left-right orientation.
In all camera angles, XF-00 Kestrel is consistently on the left, and the Control Striker is on the right, eliminating any left/right swap inconsistency between flight and turn shots. Checking the rifle's pitch angle in both turn_000.png and flight.png confirms the correct rotation and orientation.
The rifle's orientation in POSES.flight presents a disparity, requiring verification of the transformation pipeline. Determining how striker's rifle is oriented when held is crucial, suggesting a closer look at the weapon-handling code. The Blender coordinate system (Z-down) and the glTF/Three.js coordinate system (Z-up) difference necessitates careful calculation of Euler angles. If the rifle is set to 65 degrees instead of 30, both poses can be handled in the front and side views.
The initial hypothesis regarding the rifle's negative rotation causing the arm to move forward seems correct, explaining the orientation shift. Investigating the striker's rifle position in the stand pose (turn_000.png) revealed the weapon aligned along the leg's negative Z-axis, with a slight forward tilt. This configuration allows for a clean resting position in turn_000.png and forward aiming in flight.png.
The right arm occludes the rifle in the flight pose (flight.png), explaining its invisibility from the rear. Adjusting joint angles and thruster positions could refine the Kestrel's stance and visibility in various poses. Modifications to kestrel_joints() and build_kestrel_legs() are needed for a more dynamic and visible presentation. The calf thrusters require adjustments in their position to project outward from the rear fairing.
edit_file{"Path":"~/work/sortie/kit/blocks/dummy.py","Replacement":" # Splayed heroic A-stance legs (planted wide stance)\n j[\"hip\"] = V((1.24, 0.0, 9.04))\n j[\"knee\"] = V((1.56, -0.24, 4.92))\n j[\"ankle\"] = V((1.88, 0.08, 1.04))\n j[\"toe\"] = V((1.96, -1.78, 0.0))","Target":" # Splayed heroic A-stance legs (planted wide stance)\n j[\"hip\"] = V((1.20, 0.0, 9.04))\n j[\"knee\"] = V((1.44, -0.22, 4.92))\n j[\"ankle\"] = V((1.68, 0.06, 1.04))\n j[\"toe\"] = V((1.74, -1.72, 0.0))"}error
input
{ "Path": "~/work/sortie/kit/blocks/dummy.py", "Replacement": " # Splayed heroic A-stance legs (planted wide stance)\n j[\"hip\"] = V((1.24, 0.0, 9.04))\n j[\"knee\"] = V((1.56, -0.24, 4.92))\n j[\"ankle\"] = V((1.88, 0.08, 1.04))\n j[\"toe\"] = V((1.96, -1.78, 0.0))", "Target": " # Splayed heroic A-stance legs (planted wide stance)\n j[\"hip\"] = V((1.20, 0.0, 9.04))\n j[\"knee\"] = V((1.44, -0.22, 4.92))\n j[\"ankle\"] = V((1.68, 0.06, 1.04))\n j[\"toe\"] = V((1.74, -1.72, 0.0))" }result, error, 1 line
Encountered error in step execution: target content not found in the file; the Target must exactly match existing file text, including whitespace
edit_file{"Path":"~/work/sortie/kit/blocks/dummy.py","Replacement":" # Rear calf vernier thruster nacelle & nozzle bell (proud of the rear calf fairing)\n pair(\"calf_pod\", lib.box(cx, kn.y + 1.12, kn.z - 0.88, 0.68, 0.56, 1.18), \"trim\", bev=0.025, parent=\"shin\")\n pair(\n \"calf_bell_outer\",\n lib.cone(cx, kn.y + 1.44, kn.z - 1.46, 0.24, 0.38, 0.56, n=16, pitch=math.radians(142)),\n \"frame\",\n smooth=True,\n bev=0.01,\n parent=\"shin\",\n )\n pair(\n \"calf_bell_throat\",\n lib.cone(cx, kn.y + 1.48, kn.z - 1.52, 0.16, 0.29, 0.34, n=16, pitch=math.radians(142)),\n \"glow_exhaust\",\n smooth=True,\n bev=0.0,\n parent=\"shin\",\n )\n pair(\n \"calf_vane\",\n lib.box(cx, kn.y + 1.34, kn.z - 0.52, 0.10, 0.44, 0.62, pitch=math.radians(-18)),\n \"accent\",\n bev=0.012,\n parent=\"shin\",\n )\n rig.nozzle_pair(\"calf\", (cx, kn.y + 1.54, kn.z - 1.62), (0, 0.60, -0.80), 0.34, parent=\"shin\")","Target":" # Rear calf vernier thruster nacelle & nozzle bell\n pair(\"calf_pod\", lib.box(cx, kn.y + 0.86, kn.z - 0.88, 0.64, 0.52, 1.12), \"trim\", bev=0.025, parent=\"shin\")\n pair(\n \"calf_bell_outer\",\n lib.cone(cx, kn.y + 1.14, kn.z - 1.44, 0.22, 0.35, 0.52, n=16, pitch=math.radians(144)),\n \"frame\",\n smooth=True,\n bev=0.01,\n parent=\"shin\",\n )\n pair(\n \"calf_bell_throat\",\n lib.cone(cx, kn.y + 1.18, kn.z - 1.50, 0.15, 0.27, 0.30, n=16, pitch=math.radians(144)),\n \"glow_exhaust\",\n smooth=True,\n bev=0.0,\n parent=\"shin\",\n )\n pair(\n \"calf_vane\",\n lib.box(cx, kn.y + 1.06, kn.z - 0.52, 0.10, 0.38, 0.58, pitch=math.radians(-18)),\n \"accent\",\n bev=0.012,\n parent=\"shin\",\n )\n rig.nozzle_pair(\"calf\", (cx, kn.y + 1.24, kn.z - 1.58), (0, 0.58, -0.82), 0.32, parent=\"shin\")"}error
input
{ "Path": "~/work/sortie/kit/blocks/dummy.py", "Replacement": " # Rear calf vernier thruster nacelle & nozzle bell (proud of the rear calf fairing)\n pair(\"calf_pod\", lib.box(cx, kn.y + 1.12, kn.z - 0.88, 0.68, 0.56, 1.18), \"trim\", bev=0.025, parent=\"shin\")\n pair(\n \"calf_bell_outer\",\n lib.cone(cx, kn.y + 1.44, kn.z - 1.46, 0.24, 0.38, 0.56, n=16, pitch=math.radians(142)),\n \"frame\",\n smooth=True,\n bev=0.01,\n parent=\"shin\",\n )\n pair(\n \"calf_bell_throat\",\n lib.cone(cx, kn.y + 1.48, kn.z - 1.52, 0.16, 0.29, 0.34, n=16, pitch=math.radians(142)),\n \"glow_exhaust\",\n smooth=True,\n bev=0.0,\n parent=\"shin\",\n )\n pair(\n \"calf_vane\",\n lib.box(cx, kn.y + 1.34, kn.z - 0.52, 0.10, 0.44, 0.62, pitch=math.radians(-18)),\n \"accent\",\n bev=0.012,\n parent=\"shin\",\n )\n rig.nozzle_pair(\"calf\", (cx, kn.y + 1.54, kn.z - 1.62), (0, 0.60, -0.80), 0.34, parent=\"shin\")", "Target": " # Rear calf vernier thruster nacelle & nozzle bell\n pair(\"calf_pod\", lib.box(cx, kn.y + 0.86, kn.z - 0.88, 0.64, 0.52, 1.12), \"trim\", bev=0.025, parent=\"shin\")\n pair(\n \"calf_bell_outer\",\n lib.cone(cx, kn.y + 1.14, kn.z - 1.44, 0.22, 0.35, 0.52, n=16, pitch=math.radians(144)),\n \"frame\",\n smooth=True,\n bev=0.01,\n parent=\"shin\",\n )\n pair(\n \"calf_bell_throat\",\n lib.cone(cx, kn.y + 1.18, kn.z - 1.50, 0.15, 0.27, 0.30, n=16, pitch=math.radians(144)),\n \"glow_exhaust\",\n smooth=True,\n bev=0.0,\n parent=\"shin\",\n )\n pair(\n \"calf_vane\",\n lib.box(cx, kn.y + 1.06, kn.z - 0.52, 0.10, 0.38, 0.58, pitch=math.radians(-18)),\n \"accent\",\n bev=0.012,\n parent=\"shin\",\n )\n rig.nozzle_pair(\"calf\", (cx, kn.y + 1.24, kn.z - 1.58), (0, 0.58, -0.82), 0.32, parent=\"shin\")" }result, error, 1 line
Encountered error in step execution: target content not found in the file; the Target must exactly match existing file text, including whitespace
edit_file{"Path":"~/work/sortie/src/view/viewer.ts","Replacement":" if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: state === 'cruise' ? 0 : 0.22,\n y: state === 'cruise' ? 0.15 : 0.68,\n z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) rig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n root.updateMatrixWorld(true);\n const exLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(exLight);\n rig.lightExhaust(exLight, 0.75);\n }\n if (q.has('yardstick')) {\n const yName = (q.get('yardstick') || 'striker') as ModelName;\n const sep = Number(q.get('sep') ?? 4.6);\n const camYaw = THREE.MathUtils.degToRad(Number(q.get('yaw') ?? 30));\n const side = Math.cos(camYaw) < 0 ? -1 : 1;\n root.position.x = x - sep * side;\n const mYaw = THREE.MathUtils.degToRad(Number(q.get('myaw') ?? 0));\n root.rotation.y = mYaw;\n const yRoot = await model(yName, palette);\n yRoot.position.x = x + sep * side;\n yRoot.rotation.y = mYaw;\n scene.add(yRoot);\n if (yName === 'striker') applyDecals(yRoot, STRIKER_DECALS);\n treatEyes(yRoot, (q.get('eye') ?? 'spill') as EyeMode);\n const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);\n if (yName === 'striker') yRig.hold(await model('rifle', palette));\n if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: state === 'cruise' ? 0 : 0.22,\n y: state === 'cruise' ? 0.15 : 0.68,\n z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) yRig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n yRoot.updateMatrixWorld(true);\n const yLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(yLight);\n yRig.lightExhaust(yLight, 0.75);\n }\n }","Target":" if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: 0, y: 0, z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) rig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n root.updateMatrixWorld(true);\n const exLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(exLight);\n rig.lightExhaust(exLight, 0.75);\n }\n if (q.has('yardstick')) {\n const yName = (q.get('yardstick') || 'striker') as ModelName;\n const sep = Number(q.get('sep') ?? 4.6);\n root.position.x = x - sep;\n const mYaw = THREE.MathUtils.degToRad(Number(q.get('myaw') ?? 0));\n root.rotation.y = mYaw;\n const yRoot = await model(yName, palette);\n yRoot.position.x = x + sep;\n yRoot.rotation.y = mYaw;\n scene.add(yRoot);\n if (yName === 'striker') applyDecals(yRoot, STRIKER_DECALS);\n treatEyes(yRoot, (q.get('eye') ?? 'spill') as EyeMode);\n const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);\n if (yName === 'striker') yRig.hold(await model('rifle', palette));\n if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: 0, y: 0, z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) yRig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n yRoot.updateMatrixWorld(true);\n const yLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(yLight);\n yRig.lightExhaust(yLight, 0.75);\n }\n }"}
input
{ "Path": "~/work/sortie/src/view/viewer.ts", "Replacement": " if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: state === 'cruise' ? 0 : 0.22,\n y: state === 'cruise' ? 0.15 : 0.68,\n z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) rig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n root.updateMatrixWorld(true);\n const exLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(exLight);\n rig.lightExhaust(exLight, 0.75);\n }\n if (q.has('yardstick')) {\n const yName = (q.get('yardstick') || 'striker') as ModelName;\n const sep = Number(q.get('sep') ?? 4.6);\n const camYaw = THREE.MathUtils.degToRad(Number(q.get('yaw') ?? 30));\n const side = Math.cos(camYaw) < 0 ? -1 : 1;\n root.position.x = x - sep * side;\n const mYaw = THREE.MathUtils.degToRad(Number(q.get('myaw') ?? 0));\n root.rotation.y = mYaw;\n const yRoot = await model(yName, palette);\n yRoot.position.x = x + sep * side;\n yRoot.rotation.y = mYaw;\n scene.add(yRoot);\n if (yName === 'striker') applyDecals(yRoot, STRIKER_DECALS);\n treatEyes(yRoot, (q.get('eye') ?? 'spill') as EyeMode);\n const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);\n if (yName === 'striker') yRig.hold(await model('rifle', palette));\n if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: state === 'cruise' ? 0 : 0.22,\n y: state === 'cruise' ? 0.15 : 0.68,\n z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) yRig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n yRoot.updateMatrixWorld(true);\n const yLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(yLight);\n yRig.lightExhaust(yLight, 0.75);\n }\n }", "Target": " if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: 0, y: 0, z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) rig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n root.updateMatrixWorld(true);\n const exLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(exLight);\n rig.lightExhaust(exLight, 0.75);\n }\n if (q.has('yardstick')) {\n const yName = (q.get('yardstick') || 'striker') as ModelName;\n const sep = Number(q.get('sep') ?? 4.6);\n root.position.x = x - sep;\n const mYaw = THREE.MathUtils.degToRad(Number(q.get('myaw') ?? 0));\n root.rotation.y = mYaw;\n const yRoot = await model(yName, palette);\n yRoot.position.x = x + sep;\n yRoot.rotation.y = mYaw;\n scene.add(yRoot);\n if (yName === 'striker') applyDecals(yRoot, STRIKER_DECALS);\n treatEyes(yRoot, (q.get('eye') ?? 'spill') as EyeMode);\n const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);\n if (yName === 'striker') yRig.hold(await model('rifle', palette));\n if (q.has('thrust')) {\n const state = q.get('thrust');\n const reading = {\n x: 0, y: 0, z: state === 'cruise' ? 0.35 : 1,\n boosting: state !== 'cruise',\n assault: state === 'assault',\n quick: state === 'quick' ? 0.06 : 0.12,\n };\n for (let i = 0; i < 60; i++) yRig.thrust(reading, 0.5 + i * (1 / 120), 1 / 120);\n yRoot.updateMatrixWorld(true);\n const yLight = new THREE.PointLight(0xffffff, 0, 22, 1.6);\n scene.add(yLight);\n yRig.lightExhaust(yLight, 0.75);\n }\n }" }result, 1 line
Made 1 replacement in ~/work/sortie/src/view/viewer.ts starting at line 102 (+10/-4 lines).
read_file{"EndLine":145,"Path":"~/work/sortie/kit/blocks/dummy.py","StartLine":115}
input
{ "EndLine": 145, "Path": "~/work/sortie/kit/blocks/dummy.py", "StartLine": 115 }result, 32 lines
Showing lines 115-145 of 721 115: 116: 117: def build_pelvis(J): 118: P = J["pelvis"] 119: solid("pelvis_core", loft([ 120: (9.68, octo(1.08, 1.25, .24)), 121: (10.22, octo(2.22, 1.58, .36)), 122: (10.92, octo(2.08, 1.50, .34)), 123: ]), "frame", P, bevel=.025, panels=False) 124: pair("hip_trunnion", cylinder(.42, .45, 1.82, 14, axis="x", at=(-.02, 10.45)), "joint", P, P, smooth=True) 125: pair("hip_collar", cylinder(.48, 1.46, 1.66, 14, axis="x", at=(-.02, 10.45)), "metal", P, P, smooth=True) 126: 127: # Sculpted aero-chine belt girdle 128: belt = loft([ 129: (10.50, chine_ring(2.98, 1.88, keel_f=.22, keel_b=.16)), 130: (10.82, chine_ring(2.68, 1.76, keel_f=.26, keel_b=.14)), 131: (11.04, chine_ring(2.14, 1.58, keel_f=.18, keel_b=.12)), 132: ]) 133: solid("belt_girdle", belt, "main", P, bevel=.022) 134: 135: # Forward sensor & vernier codpiece prow 136: cod = loft([ 137: (9.38, chine_ring(.46, .74, cy=-.64, keel_f=.18, keel_b=.04)), 138: (9.95, chine_ring(.72, 1.06, cy=-.72, keel_f=.30, keel_b=.06)), 139: (10.58, chine_ring(.68, .98, cy=-.66, keel_f=.24, keel_b=.06)), 140: (10.98, chine_ring(.52, .80, cy=-.60, keel_f=.14, keel_b=.04)), 141: ]) 142: cod_lo, cod_hi = halves(cod, (0, -.8, 10.18), (0, -.25, 1), gap=.032) 143: solid("codpiece_lo", cod_lo, "accent", P, bevel=.018) 144: solid("codpiece_hi", cod_hi, "main", P, bevel=.018) 145: solid("codpiece_crest", prism([(-.11, 9.52), (.11, 9.52), (.08, 10.88), (-.08, 10.88)], -1.22, -.94, "xz"),read_file{"EndLine":990,"Path":"~/work/sortie/kit/blocks/dummy.py","StartLine":935}
input
{ "EndLine": 990, "Path": "~/work/sortie/kit/blocks/dummy.py", "StartLine": 935 }result, 2 lines
Showing lines 721-721 of 721 721: return build_kestrel()
read_file{"EndLine":115,"Path":"~/work/sortie/kit/blocks/dummy.py","StartLine":70}
input
{ "EndLine": 115, "Path": "~/work/sortie/kit/blocks/dummy.py", "StartLine": 70 }result, 47 lines
Showing lines 70-115 of 721 70: pieces = panels(bm, cuts, gap=gap) 71: for i, p in enumerate(pieces): 72: r = roles[i % len(roles)] if isinstance(roles, (list, tuple)) else roles 73: pair(f"{name}_{i}", p, r, jl, jr, bevel=bevel, panels=panels_on and r in ("main", "accent")) 74: 75: 76: def clip_half(bm): 77: """Keep the left (+X > 0.03) half of a symmetric bmesh so pair_split mirrors it cleanly.""" 78: _, left = halves(bm, (0.02, 0, 0), (-1, 0, 0), gap=0.04) 79: return left 80: 81: 82: def kestrel_joints(): 83: """The shared 22-joint striker skeleton adjusted into a planted, wide-shouldered heroic A-stance.""" 84: J = striker_joints() 85: J["frame"]["frame"] = "block_dummy" 86: J["frame"]["height"] = 17.6 87: place_map = {o.name: o.matrix_world.translation.copy() for o in J.values()} 88: overrides = { 89: "pelvis": (0, 0, 10.48), 90: "waist": (0, 0, 11.04), 91: "torso": (0, 0, 11.90), 92: "neck": (0, -.04, 15.26), 93: "head": (0, -.08, 15.84), 94: "shoulder": (2.14, .02, 14.70), 95: "upperarm": (2.58, .02, 14.40), 96: "forearm": (2.70, -.06, 11.92), 97: "hand": (2.78, -.20, 9.56), 98: "grip": (2.64, -.26, 9.08), 99: "thigh": (1.20, -.02, 10.45), 100: "shin": (1.44, -.22, 6.02), 101: "foot": (1.68, .06, 1.52), 102: "binder": (.94, 2.26, 14.74), 103: } 104: for k, at in overrides.items(): 105: if f"{k}.L" in place_map: 106: place_map[f"{k}.L"] = Vector(at) 107: place_map[f"{k}.R"] = Vector((-at[0], at[1], at[2])) 108: else: 109: place_map[k] = Vector(at) 110: for o in J.values(): 111: if o.parent is not None: 112: o.location = o.parent.matrix_world.inverted() @ place_map[o.name] 113: bpy.context.view_layer.update() 114: return J 115:read_file{"EndLine":625,"Path":"~/work/sortie/kit/blocks/dummy.py","StartLine":520}
input
{ "EndLine": 625, "Path": "~/work/sortie/kit/blocks/dummy.py", "StartLine": 520 }result, 107 lines
Showing lines 520-625 of 721 520: 521: # Splayed Heroic A-Stance Thighs: from hip (1.20, -.02, 10.45) to knee (1.44, -.22, 6.02) 522: pair("hip_ball_joint", cylinder(.48, .58, 1.62, 14, axis="x", at=(-.02, 10.45)), "joint", *TH, smooth=True) 523: pair("thigh_core", loft([ 524: (6.48, octo(.78, .92, .20, x=1.42, y=-.20)), 525: (8.65, octo(1.16, 1.34, .28, x=1.30, y=-.10)), 526: (10.22, octo(1.06, 1.22, .26, x=1.20, y=-.02)), 527: ]), "frame", *TH, bevel=.025, panels=False) 528: pair("thigh_ram_f", piston((.92, -.68, 10.25), (1.10, -.76, 8.65), r=.10, n=8), "metal", *TH, smooth=True) 529: pair("thigh_ram_b", piston((1.22, .68, 10.30), (1.36, .52, 7.45), r=.12, n=8), "joint", *TH, smooth=True) 530: 531: thigh_shell = loft([ 532: (6.68, asym_ring(.52, .70, .74, .76, cx=1.42, cy=-.20, keel=.20, flare=.12)), 533: (8.08, asym_ring(.66, .94, .92, .94, cx=1.34, cy=-.14, keel=.26, flare=.18)), 534: (9.32, asym_ring(.68, 1.00, .96, .98, cx=1.26, cy=-.06, keel=.26, flare=.20)), 535: (10.05, asym_ring(.54, .80, .78, .82, cx=1.20, cy=-.02, keel=.16, flare=.12)), 536: ]) 537: pair_split("thigh_shell", thigh_shell, [ 538: ((1.32, -.1, 8.38), (.32, -.18, 1)), 539: ((1.66, -.1, 8.45), (1, .12, -.15)), 540: ], ("main", "main", "accent"), *TH, gap=.038, bevel=.022) 541: pair("thigh_louver_trim", loft([ 542: (7.45, [(1.98, -.44), (2.18, -.40), (2.20, .16), (2.00, .20)]), 543: (9.08, [(2.04, -.38), (2.24, -.34), (2.26, .24), (2.06, .28)]), 544: ]), "trim", *TH, bevel=.01, panels=False) 545: 546: # Double-jointed knee drum, outboard sensor disc, and high-peaked keeled knee-guard prow 547: pair("knee_drum", cylinder(.50, .88, 2.00, 14, axis="x", at=(-.22, 6.02)), "joint", *SH, smooth=True) 548: pair("knee_disc", cylinder(.46, 1.98, 2.18, 16, axis="x", at=(-.14, 6.06)), "accent", *SH, smooth=True) 549: pair("knee_ring", cylinder(.34, 2.16, 2.24, 16, axis="x", at=(-.14, 6.06)), "metal", *SH, smooth=True) 550: pair("knee_sensor", cylinder(.22, 2.22, 2.28, 14, axis="x", at=(-.14, 6.06)), "sensor", *SH, smooth=True) 551: 552: kneecap = loft([ 553: (5.28, chine_ring(.84, .74, cx=1.46, cy=-.88, keel_f=.24, keel_b=.02)), 554: (6.16, chine_ring(1.08, .98, cx=1.44, cy=-1.02, keel_f=.36, keel_b=.04)), 555: (6.88, chine_ring(.90, .84, cx=1.42, cy=-.94, keel_f=.30, keel_b=.04)), 556: (7.38, chine_ring(.48, .54, cx=1.40, cy=-.76, keel_f=.18, keel_b=.02)), 557: ]) 558: k_lo, k_hi = halves(kneecap, (1.44, -1.0, 6.32), (0, -.25, 1), gap=.032) 559: pair("kneecap_lo", k_lo, "main", *SH, bevel=.022) 560: pair("kneecap_hi", k_hi, "accent", *SH, bevel=.022) 561: pair("kneecap_spike", prism([(-1.38, 5.92), (-1.16, 5.92), (-1.02, 7.22), (-1.26, 7.08)], 1.36, 1.52, "yz"), 562: "trim", *SH, bevel=.01, panels=False) 563: 564: # Splayed Shin Core, Knee & Achilles Pistons, and Sculpted Aero-Chine Greaves (knee x=1.44 -> ankle x=1.68) 565: pair("shin_core", loft([ 566: (1.68, octo(.82, .96, .20, x=1.66, y=.04)), 567: (5.72, octo(.96, 1.12, .24, x=1.46, y=-.18)), 568: ]), "frame", *SH, bevel=.025, panels=False) 569: pair("knee_piston", piston((1.44, .48, 7.18), (1.50, .62, 5.32), r=.105, n=8), "metal", *SH, smooth=True) 570: pair("achilles_piston", piston((1.62, .72, 2.62), (1.66, .86, 1.68), r=.085, n=8), "metal", *SH, smooth=True) 571: 572: greave = loft([ 573: (1.82, asym_ring(.58, .78, .82, .88, cx=1.66, cy=.02, keel=.22, flare=.14)), 574: (2.85, asym_ring(.70, 1.00, .96, 1.14, cx=1.60, cy=-.04, keel=.28, flare=.20)), 575: (4.18, asym_ring(.74, 1.14, .98, 1.38, cx=1.52, cy=-.06, keel=.30, flare=.24)), 576: (5.40, asym_ring(.58, .84, .80, 1.02, cx=1.46, cy=-.14, keel=.20, flare=.14)), 577: ]) 578: pair_split("greave_shell", greave, [ 579: ((1.58, 0, 3.32), (.28, -.22, 1)), 580: ((1.58, .20, 3.80), (-.15, 1, .18)), 581: ], ("accent", "main", "main"), *SH, gap=.038, bevel=.022) 582: 583: # Swept Rear Calf Vector-Thruster Nacelle & Twin Calf Nozzles 584: calf_pod = loft([ 585: (3.38, chine_ring(.94, .78, cx=1.56, cy=1.12, keel_f=.04, keel_b=.26)), 586: (4.48, chine_ring(1.14, 1.02, cx=1.52, cy=1.28, keel_f=.04, keel_b=.34)), 587: (5.26, chine_ring(.86, .74, cx=1.48, cy=1.06, keel_f=.04, keel_b=.20)), 588: ]) 589: pair("calf_thruster_pod", calf_pod, "accent", *SH, bevel=.022) 590: pair("calf_thruster_trim", prism([(1.06, 3.58), (1.68, 3.86), (1.62, 4.94), (1.06, 4.94)], 1.44, 1.60, "yz"), 591: "trim", *SH, bevel=.01, panels=False) 592: pair("calf_vents", slats(1.30, 1.84, 2.24, 3.08, 1.00, 4, depth=.1, gap=.32), "frame", *SH, panels=False) 593: nozzle_pair("calf", (1.54, 1.36, 4.12), (0, .52, -.85), .32, .56, *SH, housing=False) 594: 595: # Wide-Stance Articulated Raptor Talon Sabatons at x=1.68 596: pair("ankle_ball", cylinder(.42, 1.22, 2.14, 14, axis="x", at=(.06, 1.52)), "joint", *FT, smooth=True) 597: pair("ankle_collar", cylinder(.46, 2.00, 2.16, 14, axis="x", at=(.06, 1.52)), "metal", *FT, smooth=True) 598: 599: spat = loft([ 600: (1.02, chine_ring(.98, .72, cx=1.68, cy=-.62, keel_f=.22, keel_b=.04)), 601: (1.78, chine_ring(1.08, .82, cx=1.66, cy=-.68, keel_f=.28, keel_b=.04)), 602: (2.26, chine_ring(.68, .56, cx=1.64, cy=-.56, keel_f=.18, keel_b=.02)), 603: ]) 604: pair("ankle_spat", spat, "main", *FT, bevel=.02) 605: pair("ankle_spat_trim", prism([(-.96, 1.18), (-.68, 1.18), (-.58, 2.12), (-.88, 2.02)], 1.58, 1.74, "yz"), 606: "trim", *FT, bevel=.01, panels=False) 607: 608: sabaton = loft([ 609: (0.12, chine_ring(1.24, 2.46, cx=1.68, cy=-1.04, keel_f=.36, keel_b=.08)), 610: (0.58, chine_ring(1.18, 2.30, cx=1.68, cy=-.98, keel_f=.32, keel_b=.08)), 611: (1.08, chine_ring(.88, 1.44, cx=1.68, cy=-.48, keel_f=.20, keel_b=.06)), 612: ]) 613: sab_toe, sab_instep = halves(sabaton, (1.68, -1.44, 0.5), (0, 1, .18), gap=.036) 614: pair("sabaton_instep", sab_instep, "main", *FT, bevel=.022) 615: pair("sabaton_toe", sab_toe, "accent", *FT, bevel=.022) 616: pair("sabaton_toe_claw", loft([ 617: (0.08, chine_ring(.68, .80, cx=1.68, cy=-2.12, keel_f=.30, keel_b=.02)), 618: (0.52, chine_ring(.56, .68, cx=1.68, cy=-2.02, keel_f=.24, keel_b=.02)), 619: ]), "trim", *FT, bevel=.016, panels=False) 620: 621: heel = loft([ 622: (0.10, chine_ring(1.08, 1.12, cx=1.68, cy=1.08, keel_f=.04, keel_b=.24)), 623: (0.68, chine_ring(.96, .98, cx=1.68, cy=1.02, keel_f=.04, keel_b=.20)), 624: (1.06, chine_ring(.72, .72, cx=1.68, cy=.82, keel_f=.04, keel_b=.12)), 625: ])
agent
+1:08:43reasoning
Examining the code, the calf_pod appears to be a loft operation constructing a 3D shape using a chine ring as a base. The parameters suggest the shape relates to a calf component, possibly a nozzle or thruster. Understanding the loft operation is key to visualizing the shape.
The coordinates of the nozzle appear to be embedded within the calf pod component. Examining the chine ring parameters and the nozzle placement, a potential collision is detected where the nozzle origin is inside the pod structure, and the z-height is too high. Shifting the nozzle location and adjusting the housing parameter may resolve the interference.
The nozzle placement now appears optimal, exiting the calf pod cleanly. Considering a pose adjustment, a wide stance is being applied to the block dummy model. The existing stance may cause the legs to appear vertical, but this modification should create a dynamic Katoki-style pose. The impact on the visual presentation requires confirmation.
edit_file{"Path":"~/work/sortie/kit/blocks/dummy.py","Replacement":" pair(\"calf_vents\", slats(1.30, 1.84, 2.24, 3.08, 1.00, 4, depth=.1, gap=.32), \"frame\", *SH, panels=False)\n nozzle_pair(\"calf\", (1.54, 1.68, 3.62), (0, .56, -.83), .36, .64, *SH, housing=True)","Target":" pair(\"calf_vents\", slats(1.30, 1.84, 2.24, 3.08, 1.00, 4, depth=.1, gap=.32), \"frame\", *SH, panels=False)\n nozzle_pair(\"calf\", (1.54, 1.36, 4.12), (0, .52, -.85), .32, .56, *SH, housing=False)"}
input
{ "Path": "~/work/sortie/kit/blocks/dummy.py", "Replacement": " pair(\"calf_vents\", slats(1.30, 1.84, 2.24, 3.08, 1.00, 4, depth=.1, gap=.32), \"frame\", *SH, panels=False)\n nozzle_pair(\"calf\", (1.54, 1.68, 3.62), (0, .56, -.83), .36, .64, *SH, housing=True)", "Target": " pair(\"calf_vents\", slats(1.30, 1.84, 2.24, 3.08, 1.00, 4, depth=.1, gap=.32), \"frame\", *SH, panels=False)\n nozzle_pair(\"calf\", (1.54, 1.36, 4.12), (0, .52, -.85), .32, .56, *SH, housing=False)" }result, 1 line
Made 1 replacement in ~/work/sortie/kit/blocks/dummy.py starting at line 592 (+1/-1 lines).
edit_file{"Path":"~/work/sortie/src/view/viewer.ts","Replacement":" const rig = new MechRig(root);\n const basePose = POSES[pose] ?? POSES.stand;\n const p = (mech === 'block_dummy' && pose === 'stand') ? {\n ...basePose,\n pelvis: [2, 0, 0] as [number, number, number],\n torso: [-3, 0, 0] as [number, number, number],\n head: [2, 0, 0] as [number, number, number],\n 'shoulder.L': [0, 0, 5] as [number, number, number],\n 'shoulder.R': [0, 0, -5] as [number, number, number],\n 'upperarm.L': [-6, 8, 10] as [number, number, number],\n 'upperarm.R': [-8, -8, -10] as [number, number, number],\n 'forearm.L': [-18, 6, 0] as [number, number, number],\n 'forearm.R': [-20, -6, 0] as [number, number, number],\n 'thigh.L': [-3, 7, 5] as [number, number, number],\n 'thigh.R': [-3, -7, -5] as [number, number, number],\n 'shin.L': [6, 0, 0] as [number, number, number],\n 'shin.R': [6, 0, 0] as [number, number, number],\n 'foot.L': [-3, 5, -5] as [number, number, number],\n 'foot.R': [-3, -5, 5] as [number, number, number],\n } : basePose;\n if (pose !== 'flight') root.position.y = -rig.soles(p);\n else rig.apply(p);","Target":" const rig = new MechRig(root);\n const p = POSES[pose] ?? POSES.stand;\n if (pose !== 'flight') root.position.y = -rig.soles(p);\n else rig.apply(p);"}
input
{ "Path": "~/work/sortie/src/view/viewer.ts", "Replacement": " const rig = new MechRig(root);\n const basePose = POSES[pose] ?? POSES.stand;\n const p = (mech === 'block_dummy' && pose === 'stand') ? {\n ...basePose,\n pelvis: [2, 0, 0] as [number, number, number],\n torso: [-3, 0, 0] as [number, number, number],\n head: [2, 0, 0] as [number, number, number],\n 'shoulder.L': [0, 0, 5] as [number, number, number],\n 'shoulder.R': [0, 0, -5] as [number, number, number],\n 'upperarm.L': [-6, 8, 10] as [number, number, number],\n 'upperarm.R': [-8, -8, -10] as [number, number, number],\n 'forearm.L': [-18, 6, 0] as [number, number, number],\n 'forearm.R': [-20, -6, 0] as [number, number, number],\n 'thigh.L': [-3, 7, 5] as [number, number, number],\n 'thigh.R': [-3, -7, -5] as [number, number, number],\n 'shin.L': [6, 0, 0] as [number, number, number],\n 'shin.R': [6, 0, 0] as [number, number, number],\n 'foot.L': [-3, 5, -5] as [number, number, number],\n 'foot.R': [-3, -5, 5] as [number, number, number],\n } : basePose;\n if (pose !== 'flight') root.position.y = -rig.soles(p);\n else rig.apply(p);", "Target": " const rig = new MechRig(root);\n const p = POSES[pose] ?? POSES.stand;\n if (pose !== 'flight') root.position.y = -rig.soles(p);\n else rig.apply(p);" }result, 1 line
Made 1 replacement in ~/work/sortie/src/view/viewer.ts starting at line 69 (+19/-1 lines).
edit_file{"Path":"~/work/sortie/src/view/viewer.ts","Replacement":" const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(basePose);\n else yRig.apply(basePose);","Target":" const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);"}
input
{ "Path": "~/work/sortie/src/view/viewer.ts", "Replacement": " const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(basePose);\n else yRig.apply(basePose);", "Target": " const yRig = new MechRig(yRoot);\n if (pose !== 'flight') yRoot.position.y = -yRig.soles(p);\n else yRig.apply(p);" }result, 1 line
Made 1 replacement in ~/work/sortie/src/view/viewer.ts starting at line 150 (+2/-2 lines).
agent
+1:09:15reasoning
Rebuilding the dummy model and re-rendering the frames. Aiming to generate the turnaround sheet, expecting the new model to address the previous rendering issues.
run_command{"CommandLine":"npm run -s kit -- block_dummy\nnpx vite --port 5199 > /tmp/vite.log 2>&1 &\nVITE_PID=$!\nsleep 2\n\nW=1920 H=1080 node tools/shoot.mjs /tmp/inspect \\\n flight=\"/?view=block_dummy&pose=flight&thrust=boost&yardstick=striker&sep=4.6&look=kit&yaw=162&pitch=10&dist=35&ty=8.4\" \\\n turn_000=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=0\" \\\n turn_045=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=45\" \\\n turn_090=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=90\" \\\n turn_135=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=135\" \\\n turn_180=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=180\" \\\n turn_315=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=-45\"\n\nkill $VITE_PID 2>/dev/null || true\ncp /tmp/inspect/flight.png ~/out/kestrel-flight-yardstick.png\nls -lh ~/out/kestrel-flight-yardstick.png /tmp/inspect/turn_*.png","WaitMsBeforeAsync":10000,"toolSummary":"Rebuild block_dummy.glb and render updated rear-flight and 6 turnaround shots"}
input
{ "CommandLine": "npm run -s kit -- block_dummy\nnpx vite --port 5199 > /tmp/vite.log 2>&1 &\nVITE_PID=$!\nsleep 2\n\nW=1920 H=1080 node tools/shoot.mjs /tmp/inspect \\\n flight=\"/?view=block_dummy&pose=flight&thrust=boost&yardstick=striker&sep=4.6&look=kit&yaw=162&pitch=10&dist=35&ty=8.4\" \\\n turn_000=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=0\" \\\n turn_045=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=45\" \\\n turn_090=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=90\" \\\n turn_135=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=135\" \\\n turn_180=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=180\" \\\n turn_315=\"/?view=block_dummy&pose=stand&yardstick=striker&sep=4.5&look=kit&yaw=0&pitch=6&dist=35&ty=8.8&myaw=-45\"\n\nkill $VITE_PID 2>/dev/null || true\ncp /tmp/inspect/flight.png ~/out/kestrel-flight-yardstick.png\nls -lh ~/out/kestrel-flight-yardstick.png /tmp/inspect/turn_*.png", "WaitMsBeforeAsync": 10000, "toolSummary": "Rebuild block_dummy.glb and render updated rear-flight and 6 turnaround shots" }result, 583 lines
Command exited with code 0. Command output: Blender 5.2.3 LTS (hash e13b728c6880 built 2026-10-22 01:35:05) 00:00.070 system.path | WARNING Could not get a list of mounted file-systems INFO Draco is available, use library at ~/.local/opt/blender-5.2.3-linux-x64/lib/libbf_intern_draco_bridge.so INFO MeshOptimizer is available, use library at ~/.local/opt/blender-5.2.3-linux-x64/lib/libbf_intern_meshopt_bridge.so 03:02:22 | INFO: Starting glTF 2.0 export 03:02:22 | INFO: Extracting primitive: belt_girdle.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: codpiece_crest.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: codpiece_hi.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: codpiece_lo.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_collar.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_collar.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_trunnion.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_trunnion.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pelvis_core.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_lip.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_front_lip.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_rear_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_rear_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_rear_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_rear_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_vane.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: skirt_side_vane.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: tail_fin.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: tail_stabilizer.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_ball_joint.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: achilles_piston.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf.L.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_housing.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_thruster_pod.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_thruster_trim.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_vents.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_ball.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_collar.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_spat.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_spat_trim.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_heel.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_instep.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_toe.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_toe_claw.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sole_front.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sole_heel.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_2.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_3.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_disc.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_drum.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_piston.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_ring.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_sensor.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_hi.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_lo.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_spike.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: shin_core.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_core.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_louver_trim.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_ram_b.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_ram_f.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_2.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_3.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: hip_ball_joint.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: achilles_piston.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf.R.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_housing.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_thruster_pod.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_thruster_trim.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: calf_vents.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_ball.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_collar.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_spat.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: ankle_spat_trim.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_heel.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_instep.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_toe.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sabaton_toe_claw.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sole_front.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: sole_heel.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_2.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: greave_shell_3.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_disc.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_drum.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_piston.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_ring.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: knee_sensor.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_hi.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_lo.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: kneecap_spike.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: shin_core.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_core.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_louver_trim.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_ram_b.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_ram_f.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_2.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: thigh_shell_3.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: abs_plate_0.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: abs_plate_1.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: abs_plate_2.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: spine_core 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: spine_ring_0.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: spine_ring_1.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: spine_ring_2.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: back_carapace_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: back_carapace_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: back_carapace_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: back_carapace_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_boom.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_capacitor.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_collar.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_hinge.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_nozzle.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_nozzle.L.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_hi.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_lo.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_trim.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_boom.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_capacitor.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_collar.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_hinge.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_nozzle.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_nozzle.R.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_hi.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_lo.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: binder_wing_trim.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main.L.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main.R.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_aux.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_aux.L.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_aux.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_aux.R.glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_housing.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_housing.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_shroud.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: main_shroud.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_hull_hi.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_hull_lo.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_spine_fin.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_tank.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_tank.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_tank_band.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_tank_band.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_turbine 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_turbine_collar 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: pack_turbine_glow 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: belly_slats 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: belly_vent_housing.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_2.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_nacelle_2.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_lens_core 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_lens_glass 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_lens_ring.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: chest_lens_socket.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: cockpit_canopy.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: cockpit_hud_slit 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: cockpit_prow_hi.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: cockpit_prow_lo.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: cockpit_rescue_trim.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_shroud_0.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_shroud_0.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_shroud_1.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_shroud_1.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_trim.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: collar_trim.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: intake_lip.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: intake_lip.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: intake_vanes.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: intake_vanes.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_antenna.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_antenna.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_cheek.L.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_cheek.R.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_cranium.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_ear_lens.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_ear_lens.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_eye.L 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_eye.R 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_jaw.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_mast.001 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_mast_sensor 03:02:22 | INFO: Primitives created: 1 03:02:22 | INFO: Extracting primitive: head_visor.001 03:02:22 | INFO: Primitives created: 1
183 more lines not shown.