A mech game prototype, pushed by Gemini 4 Argon
agent
+0:26reasoning
Initial investigation reveals documentation and tool files related to a "kit," "makers," and new tools, suggesting an exploration of project components and their intended uses. Examination focuses on files detailing outlines, blocks, clip functionality, and documentation of study proportions, atelier, and visual language, indicating an effort to understand the project's conceptual and practical architecture.
read_file{"Path":"~/work/sortie/docs/study-proportions.md"}
input
{ "Path": "~/work/sortie/docs/study-proportions.md" }result, 153 lines
Showing lines 1-152 of 152 1: # Study: line mech proportions 2: 3: > **Status 2026-11-08: parked.** The measurements are usable. The targets were my choice and don't bind the one-mech restart. See [handbook.md](handbook.md). 4: 5: What makes a mass produced line mech read as handsome, measured, and what the common pattern took 6: from it. Read 2026-10-27. References are for study only: images stay in review/out/proportions 7: (gitignored), nothing here is copied, sources are linked below. 8: 9: ## Method 10: 11: - **References.** Near front photos of plastic kits on a plain ground, one per design: the GM and 12: GM II, the Jegan and Jesta, the Zaku II, the Graze, the GN-X, and the Ingram as an outlier (a police 13: labor, half our height class). Kits follow the settei closely and photograph square on. The 14: Phantom Brigade families (review/out/pb) for the side view and the frame, principles only. 15: - **Readings.** Every number is a fraction of the crown height: the helmet top, antennae and 16: backpack racks skipped, down to the sole. Heights are measured up from the ground. Landmarks were 17: read by eye on a pixel grid, leg widths from silhouettes where the kit cut out cleanly. The camera 18: sits at mid height a few metres off, so expect plus or minus .02 on heights and widths. Ratios 19: between designs are more reliable than any one number. 20: - **Ours.** Flat silhouettes from the lab (`?sil=1`, a 6 degree lens from 200 m, so close to 21: orthographic), measured by a script with the same definitions. The knee joint comes from the kit. 22: - **Target.** The middle of the GM, GM II, Jegan and Graze: the plain workhorse, not a hero. 23: 24: ## Ratios 25: 26: Widths are full widths (both sides), the thigh and lower leg one leg. The lower leg's widest point is 27: the widest row between the knee and the ankle cuff. 28: 29: | Ratio | GM | GM II | Jegan | Graze | Jesta | Zaku II | GN-X | Workhorse range | Round 7 medium | Round 7 heavy | Target | Retuned medium | Retuned heavy | 30: |---|---|---|---|---|---|---|---|---|---|---|---|---|---| 31: | Head height | .11 | .12 | .11 | .10 | .12 | .10 | .09 | .10 to .12 | .08 | .09 | .10 | .10 | .10 | 32: | Head width | .11 | .11 | .13 | | | | .11 | .11 to .13 | .10 | .11 | .11 to .12 | .12 | .12 | 33: | Chin above pauldron top | 0 | 0 | below | 0 | below | 0 | 0 | at or below | .03 | .03 | 0 | 0 | 0 | 34: | Shoulder span | .39 | .45 | .53 | .55 | .52 | .49 | .53 | .39 to .55 | .38 | .40 | .45 | .45 | .46 | 35: | Chest width | .23 | .22 | .23 | | .22 | .24 | .28 | .22 to .24 | .22 | .23 | .23 to .26 | .27 | .28 | 36: | Waist width | .19 | .17 | .16 | | .13 | .24 | | .13 to .19 | .10 | .11 | .13 | .14 | .15 | 37: | Hip and skirt width | .25 | .27 | .29 | | .34 | .29 | | .25 to .29 | .24 | .33 | .28 | .28 | .28 | 38: | Crotch | .53 | .54 | .57 | .53 | .51 | .51 | .63 | .53 to .57 | .56 | .54 | .54 | .54 | .53 | 39: | Knee joint | .39 | .40 | .43 | .40 | .36 | .37 | .39 | .39 to .43 | .35 | .35 | .39 | .39 | .39 | 40: | Visible thigh (crotch to knee) | .14 | .14 | .14 | .13 | .15 | .14 | .24 | .13 to .14 | .21 | .19 | .15 | .15 | .14 | 41: | Thigh width | .09 | .11 | .09 | .17 | .14 | .09 | | .09 to .11 | .09 | .11 | .09 | .09 | .11 | 42: | Lower leg, widest | .12 | .15 | .18 | | | .23 | | .12 to .18 | .08 | .09 | .12 | .12 | .12 | 43: | Lower leg widest at | .36 and .14 | .14 | .23 | .17 | .24 | .20 | .15 | .14 to .24 | .18 | .18 | .25 | .24 | .28 | 44: | Lower leg / thigh width | 1.4 | 1.4 | 2.1 | | | 2.6 | | 1.4 to 2.1 | .93 | .85 | 1.3 to 1.4 | 1.3 | 1.1 | 45: | Hand bottom | .48 | .49 | .49 | | | .51 | | .48 to .51 | .51 | .52 | .48 | .49 | .49 | 46: | Foot width (front) | .12+ | .13+ | .13+ | | | | | .12 and up | .09 | .10 | .11 | .11 | .13 | 47: 48: Still off the target after the retune: the chest is a little wide (.27, the shoulders moving out 49: widen its top), and the heavy's lower leg is only 1.1 times its thigh in front view, because the 50: heavy thigh carries its shield and the heavy calf pack sits behind the shin. Side view, retuned 51: medium: chest depth .28, foot length .23, the knee the most forward point of the leg. 52: 53: Round 8 closes both, measured on an orthographic front silhouette (ray cast in Blender, the chest 54: read at .78, the thigh as its widest row between .42 and .50, the lower leg as its widest between .10 55: and .36): 56: 57: | Ratio | Light before | Light after | Medium before | Medium after | Heavy before | Heavy after | 58: |---|---|---|---|---|---|---| 59: | Chest width | .26 | .22 | .27 | .23 | .28 | .24 | 60: | Thigh width | .083 | .083 | .095 | .095 | .115 | .104 | 61: | Lower leg, widest | .117 | .117 | .123 | .123 | .126 | .152 | 62: | Lower leg / thigh width | 1.41 | 1.41 | 1.29 | 1.29 | 1.10 | 1.46 | 63: | Accent share of plate area | .12 | .22 | .17 | .23 | .16 | .24 | 64: 65: The Ingram reads head .14, crotch .45, knee .23: a short labor, kept out of the range. The GN-X 66: stands on long 00 style legs (crotch .63) and is kept out of the leg rows. Foot widths in the 67: photos carry the most perspective, the feet stand nearest the camera and turn out, so the range is 68: a floor. 69: 70: ## Principles 71: 72: In our words, for a plain line mech of the standard class. 73: 74: - **The head is a tenth of the height** and sits down between the shoulders. The chin is level with 75: the pauldron tops or below them. A visible neck reads as a robot toy, not a soldier. 76: - **Shoulder span is about four head widths**, .45 of the height: wider than the hips, narrower 77: than a hero's flared pauldrons (Jegan, Graze .53 to .55). 78: - **The leg is a short thigh over a long shin.** The crotch sits at .54, the knee joint at .39, so 79: only .14 of thigh shows below the skirt and the lower leg runs .32 from knee to sole. The skirt 80: covers the top of the thigh. Our round 7 had the human ratio, a .21 thigh, which is what read as 81: "the legs are off". 82: - **The lower leg is the widest part of the leg**, 1.3 to 2 times the thigh. A plain GM keeps it a 83: straight box with a cuff over the ankle, a Jegan or Zaku swells it into a bell. Its widest point 84: sits between .15 and .25 of the height, at or below its middle, never at the knee. The thigh is the 85: narrowest armoured mass in the leg. 86: - **The knee armour is as wide as the shin top** and projects forward of both the thigh and the 87: shin, in the field colour, read by shape. A knee cap narrower than the leg, or in a contrasting 88: colour, reads as a band across the leg. 89: - **Big feet.** A foot as wide as the lower leg at its widest, standing apart: the line mech stands 90: in a slight A, feet out from under the hips. 91: - **The waist is a block, not a pinch.** Two thirds of the chest width or more, an abdomen plate 92: that carries the line from the chest down to the skirt. 93: - **Hands hang at the crotch or a little below**, .48. 94: - **Coverage.** The workhorses cover almost the whole leg: the frame shows at the back of the knee, 95: in the gap at the knee front, and at the ankle. Four or five horizontal breaks per leg: skirt hem, 96: knee top, knee bottom, the ankle cuff, the foot. 97: - **Accent goes on the chest and the feet** (the GM's red chest and boots, the Jegan's dark feet), 98: plus the shoulders on some. Between hip and ankle the legs keep the field colour across their width, 99: so they read as one long mass: accent there only as long panels running down the leg, never as a band 100: across it. 101: - **Side view.** The knee is the most forward point of the leg, the shin rakes back from it, the 102: calf swells behind at mid shin, the toe reaches well forward of the knee. The chest is the deepest 103: part of the body with the backpack, the waist sits back from the chest front. (From three quarter 104: photos and the Phantom Brigade side renders: lower confidence than the front.) 105: 106: ## What changed in the common pattern 107: 108: - `frame_std.proportion` (pattern builds only, after the plates and `bend_knees`): solves the drop 109: of the body and the knee height for crotch .54 and knee .39 of the crown, squeezes the thigh, 110: moves the knee region whole so the knee block keeps its shape, moves the shoulders out .25 with the 111: chest top widening to meet them, then scales so the crown lands at 16.9 m. The 22 joints keep their 112: names and tree. The striker and the other frames are untouched. 113: - Head 1.24 times the drawn size, seated .6 lower, the chin on the collar. 114: - Shin outline widened to its widest at about a quarter of the height, a cuff over the ankle. Knee 115: block as wide as the shin top, in the main colour. The steel hip block is gone, the tassets reach 116: further down over the thigh. Feet 1.45 times wider and a little shorter. Feet .4 out from under the 117: hips. 118: - Waist plate and belly plate wider and taller. 119: - Heavy legs keep the medium's outlines and add pieces: a thigh shield, knee cheeks both sides, a 120: spaced shin guard, a calf pack and ankle spats. 121: - Light leg plates are thicker (.28), and every thin plate is cut by a block grown across the other 122: axes, so no coplanar walls leave stray slivers. 123: - The back of the head is a neck guard carried down from the helmet with a vent slot and a red lamp. 124: - Round 8: the breastplate narrowed to .23 (outer edge 1.84 to 1.64 before proportion), with a root 125: cover in the field colour in front of each shoulder housing, so the narrower chest does not open a 126: dark hole under the pauldron. The cover rides the shoulder joint and turns about its axis. 127: - Round 8: colour blocking (docs/visual-language.md, Livery). The upper breastplate and the hatch, the 128: boots, the head's cheeks and two panels on the backpack's back are accent. The collar, the pauldrons, 129: the backpack tanks and the knee stay main. Long accent panels stay on the shins and outer thighs, and 130: the heavy's spaced shin guard carries its own. 131: - Round 8: the thigh's lower lip is shorter with a chamfered corner and the knee block lower with an 132: upright front plane, so a seam shows between them in three quarter view. The heavy adds a faceted 133: module on the outer calf and pulls its thigh shield and knee cheeks in. Forearms and upper arms are 134: about 15 percent fuller. The light grade's thigh and calf backs are closed blocks behind the bone, 135: not thin plates on a curved face (those read as loops from the side). 136: 137: ## Sources 138: 139: Kit reviews (photos on a plain ground): 140: 141: - GM, MG RGM-79 Ver 2.0: https://www.dalong.net/reviews/mg/m118/m118_p_e.htm 142: - GM II, HGUC RMS-179: https://www.dalong.net/reviews/hg/h131/h131_p_e.htm 143: - Jegan, MG RGM-89: https://www.dalong.net/reviews/mg/m204/m204_p_e.htm 144: - Jesta, MG RGM-96X: https://www.dalong.net/reviews/mg/m168/m168_p_e.htm 145: - Zaku II, HGUC MS-06: https://www.dalong.net/reviews/hg/h241/h241_p_e.htm 146: - Graze, 1/100: https://www.dalong.net/reviews/ib/ib102/ib102_p_e.htm 147: - GN-X, MG GNX-603T: https://www.dalong.net/reviews/mg/m128/m128_p_e.htm 148: - Ingram, MG AV-98: https://www.dalong.net/reviews/mg/ing1/ing1_p_e.htm 149: 150: Also consulted: the GN-X and Union Flag settei already in review/out/refs (painted with a low camera, 151: too much perspective to measure), the Armored Core 6 frames there (three quarter art, not measured), 152: and the Phantom Brigade renders in review/out/pb.
read_file{"Path":"~/work/sortie/docs/study-atelier.md"}
input
{ "Path": "~/work/sortie/docs/study-atelier.md" }result, 291 lines
Showing lines 1-290 of 290 1: # Study: knightly frames for the houses' atelier 2: 3: > **Status 2026-11-08: parked.** The findings are useful, the rules are guessed and don't bind the one-mech restart. See [handbook.md](handbook.md). 4: 5: What makes a knight's machine read as one, measured, and what the atelier took from it. Read 6: 2026-10-28. References are for study only: images stay in review/out/atelier (gitignored), nothing 7: here is copied, sources are linked below. Method as in docs/study-proportions.md. 8: 9: ## Method 10: 11: - **References.** Near front photos of plastic kits on a plain ground: Gyan (MG), Schwalbe Graze 12: (1/100), Kimaris (HG), Bael (HG), Vidar (HG), Epyon (MG). The knightmare line art and settei already 13: read for docs/light-frames.md (Gloucester, Lancelot, Vincent, Sutherland), for principles only: 14: they are a 4.4 m class on wheel feet. Escaflowne's guymelefs and Five Star Stories mortar headds 15: had no usable front photos on the sites that load here. 16: - **Readings.** Fractions of the crown height (the helmet top, crests and spikes skipped), heights up 17: from the sole. Read by eye on a pixel grid, plus or minus .03: these are small kits shot close, and 18: shields, wings and tails hide edges. Ratios between designs are safer than any one number. 19: - **Ours.** Read off the lab model in Blender with the same definitions: the helm top, the faceplate's 20: chin, the pauldron tops (flange included), the plates' widths, the pelvis block's underside for the 21: crotch, the shin joint for the knee. Leg widths from the flat front silhouette (`?sil=1`). 22: 23: ## Ratios 24: 25: | Ratio | Gyan | Schwalbe | Kimaris | Bael | Vidar | Epyon | Knight range | Pattern medium | 26: |---|---|---|---|---|---|---|---|---| 27: | Head height | .16 | .13 | .11 | .10 | .08 | .12 | .08 to .13 | .10 | 28: | Chin below the pauldron tops | .09 | .09 | .08 | .08 | .05 | 0 | .05 to .09 | 0 | 29: | Shoulder span | .50 | .63 | .59 | .53 | .51 | .52 | .50 to .63 | .44 | 30: | Chest width | .28 | .24 | .21 | .24 | .19 | .28 | .19 to .28 | .23 | 31: | Waist width | .16 | .12 | .12 | .15 | .11 | .14 | .11 to .16 | .145 | 32: | Skirt width | .30 | .40 | .30 | .28 | .30 | .30 | .28 to .40 | .28 | 33: | Crotch | .47 | .55 | .49 | .50 | .53 | .47 | .47 to .55 | .55 | 34: | Knee joint | .35 | .41 | .43 | .45 | .42 | .40 | .35 to .45 | .39 | 35: | Lower leg, widest | .17 | .10 | .25 | .12 | .20 | .22 | .10 to .25 | .126 | 36: | Lower leg widest at | .13 | .15 | .15 | .10 | .35 | .15 | low, .10 to .15 | .24 | 37: | Hands | .47 | .53 | .49 | .50 | .55 | .52 | .47 to .55 | .475 | 38: 39: The Gyan's head counts its conical helm, the spike above it skipped. The Schwalbe's thighs carry 40: thruster blocks (.19 wide), so its lower leg reads narrower than its thigh. The Vidar's widest lower 41: leg is its thruster pods high on the shin. 42: 43: The knightmares (docs/light-frames.md) agree on the top half: shoulders .48 to .52 through pauldrons, 44: not chest, waist .14 to .17, head .11 to .12 with the crest. Their knee is low (.28 to .30) because of 45: the wheel feet, so their legs are not used here. 46: 47: ## Principles 48: 49: In our words, for a knight's machine of the standard class. 50: 51: - **Wide through the pauldrons, narrow through the body.** The shoulder span runs a fifth wider than 52: a line mech's (.50 to .63 against .44), reached with big pauldrons standing out from a chest no 53: wider than the line mech's. The pauldrons, not the chest, set the width. 54: - **The head sits down between them.** The chin is .05 to .09 below the pauldron tops. The helm is 55: small, the crest or spike gives it the height. A knight's head never stands clear of its shoulders. 56: - **A pinched waist and a flaring skirt.** Waist .11 to .16, the skirt flaring out below it: an hourglass 57: from the front, where the line mech is a column. 58: - **Long lower legs, little thigh.** The knee joint sits at .40 to .45 and the skirt hangs to near the 59: knee, so a tenth of the height or less of thigh shows. The lower leg is the leg. 60: - **The lower leg flares at the ankle.** Gyan, Kimaris and Epyon widen into a bell or a greave over the 61: foot, widest at .10 to .15, where the line mech is widest at mid shin. Bael keeps a slim greave. 62: - **Breakers at the top.** Swept up pauldron tips, a crest, a spike: the outline above the shoulders 63: is busier than the line mech's, the outline below the waist plainer. 64: - **Round shells.** The plates curve: round pauldrons, curved greaves, a rounded breastplate. One 65: smooth curve per plate, not facets. 66: 67: ## What the atelier took 68: 69: Its stance (`makers/atelier.stance`, atelier builds only) is the line mech's `proportion` with its own 70: numbers, plus a narrower stance: 71: 72: | Ratio | Light | Medium | Heavy | Pattern medium | 73: |---|---|---|---|---| 74: | Crown height | 17.2 m | 17.2 m | 17.2 m | 16.9 m | 75: | Crest top | 1.06 | 1.07 | 1.08 | antenna | 76: | Head height | .097 | .097 | .097 | .10 | 77: | Chin below the pauldron tops | .03 | .04 | .05 | 0 | 78: | Shoulder span | .48 | .54 | .58 | .44 | 79: | Chest width | .21 | .23 | .27 | .23 | 80: | Waist width | .11 | .115 | .14 | .145 | 81: | Crotch | .55 | .55 | .55 | .55 | 82: | Knee joint | .43 | .43 | .43 | .39 | 83: | Thigh width | .077 | .081 | under the tassets | .095 | 84: | Lower leg, widest | .121 | .137 | .151 | .126 | 85: | Lower leg widest at | .13 | .135 | .135 | .24 | 86: | Hands | .47 | .47 | .47 | .475 | 87: 88: - The crotch stays at the line mech's .55: the shared frame's torso sets it, and a lower crotch would 89: squeeze the thigh to nothing. The long leg comes from the knee instead. 90: - Shoulders move out .25 like the pattern's, the span comes from the pauldron flare. The grades differ 91: most here: the light's span is the pattern's plus a tenth, the heavy's a third. 92: - The waist pinches on the light and medium and fills out on the heavy, so the castellan reads by its 93: body, not only by its shield. 94: - Feet .28 out from under the hips, not .4: a narrower stance. 95: - The helm is drawn round the frame's head block and the whole head seated .72 lower, between the 96: pauldron flanges. 97: 98: ## Appeal: what round 1 missed 99: 100: The owner's verdict on round 1: the shape is right, the machine is bland. The silhouette held (flared 101: pauldrons, crest, pinched waist, bell greaves). The surfaces failed. Read against museum harness 102: (the Met's gothic, Maximilian and Greenwich armours, links below) and the kits above: 103: 104: - **Compound curves.** Round 1 made every plate a cone or a cylinder of even thickness: the pauldrons 105: read as upturned flowerpots, the greaves as tubes, the breastplate as a card. Plate armour is domed in 106: two directions at once: a pauldron is a bowl over the shoulder, a breastplate swells forward low on the 107: chest (the pigeon breast) and draws in to the waist, a greave swells over the calf and narrows at the 108: ankle. A curve down the plate catches a moving highlight, a straight one does not. 109: - **Edges.** Harness reads through its edges: rolled or roped borders, a medial ridge down the breast, 110: greave and cuisse, flutes fanning across a plate. They catch light where a flat sheet has none. 111: Too many of them flatten the hierarchy again: gold on every rim made A's first build read as stripes. 112: Gold on the main hems only, the rest rolled in the plate's own colour. 113: - **Hierarchy and layering.** One hero shape per machine (the pauldron, or the crest and collar), then 114: supporting shapes at the hips and knees, then small ones. Overlapping lames, a plackart over the breast, 115: fans on the couters and poleyns give big, medium and small shapes and shadow lines between them. 116: - **Value.** Dark wine on a dark grey frame was one value. The frame must sit a clear step from the wine, 117: ivory must come in deliberate masses, and the paint needs a sheen so the curves show. A matte look 118: hides exactly the curvature the plates now have. 119: - **A face, not a hatch.** A rectangular hatch in the breast reads as an appliance panel. The hatch should 120: be a design line of the plate: a medial panel between two seams, the field above a V, the whole shield. 121: - **Thigh.** With the knee at .43 a tenth of a metre of thigh showed. The board puts the knee at .40 and 122: gives the thigh a cuisse of its own, so the leg reads as thigh, knee, greave. 123: - **Grades by role.** Grades that differ by thickness and a few add-ons look alike at range. A house 124: knight's grades are roles: a lean duellist, a line knight, a castellan. They differ in proportion, 125: coverage and hero element (docs/sizes.md reading distances). 126: 127: ## House lines 128: 129: The owner on round 2's board: all four directions distinct and good, keep them all. The atelier builds to 130: order per house (docs/manufacturers.md), so the four directions are four lines of the one maker, kept 131: apart on purpose. Working names: 132: 133: | Line | Lab | Idea | Joint covers | 134: |---|---|---|---| 135: | Harness (A) | `lab_atelier_a` | gothic and Maximilian plate: fluted domes over lames, a pigeon breast under a fluted plackart, lamed tassets, fanned couters and poleyns, roped gold on the main hems | quilt, mail fauld | 136: | Estoc (B) | `lab_atelier_b` | few smooth shapes ending in points: leaf pauldrons swept up behind, a keeled breast, a corset waist, blade tassets, spiked couters, pointed knee guards | bellows | 137: | Blazon (C) | `lab_atelier_c` | big heraldic shapes painted per pale and counterchanged: round pauldrons, a high collar, a fan crest, a heater shield breast with a gold chevron | quilt, mail fauld | 138: | Tilt (D) | `lab_atelier_d` | lopsided tourney harness: a grandguard over the left breast and pauldron, a volant, a pasguard, a small right pauldron with a besagew, a lance, a frog mouth great helm | quilt, mail fauld | 139: 140: Each lab holds the line in three grades, slot1 light, slot2 medium, slot3 heavy: 141: `/?view=lab_atelier_c&only=slot2&tx=20&palette=houses&bg=studio`. Round 1's medium is `lab_atelier` slot2. 142: The shared knightkit sheets (`kit/lab/knightkit.py`) make domed plates, rolled and roped rims, ridges and 143: flutes, the layered lames and bolted add-ons of the grades, and the joint covers. The knee sits at .41 on the 144: light, .40 on the medium and .39 on the heavy. 145: 146: What the critique found on round 2's board (two rounds, Codex): Harness the most armourer made up close but 147: the most familiar, Estoc the cleanest foundation, Blazon the clearest identity at 2 km and 300 m, Tilt the 148: strongest story but the most dependent on its lance. Blazon's two colour read comes from assigning accent to 149: half the plates, against the 70/20 rule in docs/visual-language.md, so a house that picks it accepts that. 150: All four share the frame's limb lengths and stance, so the lines differ most in the top half. 151: 152: The houses' palette went with it: the wine a step lighter and lacquered (a palette `lacquer` keeps its 153: sheen under the matte field look), the frame a darker, matte steel, so the plates and the joint covers keep 154: a value step in shade. 155: 156: **Tilt's helm.** Round 2's helm (the atelier prow helm under a frog mouth crown) read as weird. Tilt now has a 157: helm of its own: a barrel great helm with a flat domed top and a gold cross brace, a keeled bevor drawn 158: forward into a prow, the sight a narrow dark slot between the bevor's lip and the crown, breaths on the right 159: cheek, studs where it bolts to the breast. Plain on the light, crested on the medium, a taller crest and a 160: bolted brow plate on the heavy. 161: 162: ## The frame peeking out 163: 164: The owner on round 2's grades: why is the inner frame peeking out? The rule stays (the shared frame shows at 165: the joints), but the common pattern's boxy grey skeleton read as scaffolding behind a costume. Real harness 166: never shows the man: mail and an arming doublet fill every gap. So the atelier dresses the joints in a soft 167: layer in the frame colour (docs/visual-language.md, Joint covers): 168: 169: - A quilted or bellows roll round the waist, gussets at the armpits over the shoulder rams, rolls at the 170: elbows (in two halves, so they can bend), the neck, the hips, and on the heavy the wrists and ankles. 171: - A fauld at the hips in flat hanging sections broken at each leg, mail on Harness, Blazon and Tilt. 172: - Flat pads behind the knees with shallow folds only in the bend, over the knee rams. Never a ring in front: 173: the poleyn is the front. 174: - An arming sleeve on the light's bare upper arm, under its cap. 175: - A quiet quilt under the cuisses, where the thigh's gap between front and back plates is not a joint. 176: 177: Coverage by grade: the light shows its elbows, knees and neck and covers only the accidental gaps (waist, 178: bare upper arm, behind the hips and knees, the armpits), the medium covers most of the frame, the heavy 179: nearly all of it. Lessons from the critique: covers read as tyres, hoses or inflated shorts when they are 180: rings with deep round folds, so they stay flat, shallow and broken up. Still showing on every line: the 181: frame's horizontal shoulder bars and the outer thigh rails, which are shared frame geometry. 182: 183: ## Grades by plate count 184: 185: The owner on the first grade sketch: a heavier grade should carry more armour, not only bulkier armour, 186: an increase in intricacy. Read against light and heavy fits of one base: 187: 188: - **Kits.** MG Gundam ver 2.0 against MG Full Armor Gundam, HG Kimaris against the 1/100 Kimaris Trooper, 189: HG Graze against the Graze Ritter (and the Graze Ein). 190: - **Harness.** The Met's light cavalry armour (ca. 1510), half armour (ca. 1510 to 20), three quarter armour 191: (ca. 1525), field armour (ca. 1525), full harness (ca. 1520) and armour for the joust of peace (ca. 1500). 192: 193: Plates per side by region, separate plate pieces read by eye on the photos (plus or minus 2, rims, bolts 194: and weapons not counted), and the most plates stacked over one point: 195: 196: | Fit | Shoulder | Chest and waist | Hips | Thigh | Lower leg | Total | Layers | 197: |---|---|---|---|---|---|---|---| 198: | Gundam | 1 | 3 | 3 | 1 | 3 | 11 | 1 | 199: | Full Armor Gundam | 2 | 6 | 6 | 2 | 5 | 21 | 2 | 200: | Graze | 1 | 2 | 3 | 1 | 2 | 9 | 1 | 201: | Graze Ritter | 2 | 3 | 4 | 1 | 3 | 13 | 1 to 2 | 202: | Kimaris | 1 | 3 | 4 | 1 | 3 | 12 | 1 | 203: | Kimaris Trooper | 1 | 3 | 6 | 1 | 3 | 14, plus shield and rear unit | 2 at the hips | 204: | Light cavalry harness | 7 | 4 | 0 | 0 | 0 | 11 | 1 | 205: | Half armour | 6 | 5 | 4 | 0 | 0 | 15 | 1 | 206: | Three quarter armour | 6 | 5 | 8 | 3 | 0 | 22 | 1 | 207: | Field armour | 6 | 6 | 5 | 4 | 9 | 30 | 2 (plackart) | 208: | Joust of peace | 6 | 7 | 5 | 0 | 0 | 18, upper body | 3 on the left | 209: 210: - **Heavy fits add plates, not thickness.** The Full Armor Gundam keeps the base plates and bolts a second 211: set over them: twice the pieces, two layers, the base showing at the edges of the add-ons. The Kimaris 212: Trooper and the Graze Ritter add lames and skirts more than they thicken anything. 213: - **Harness grows by coverage first, then by layers.** Light harness covers the upper body in many small 214: lames and leaves the legs bare. Each heavier fit covers more of the body (tassets to the knee, then 215: cuisses, greaves and sabatons), then reinforces where it is struck: a plackart over the breast, a 216: grandguard over that on the joust's left side. 217: - **A step is roughly half again to twice the plates**, and a heavy fit adds a second layer at the 218: shoulders, the chest, the hips and the shins. Edges grow with the plates: every added lame or add-on 219: brings its own rim, so rims climb faster than plates. 220: 221: Every line's grades, counted on the built models the same way (one side and the centre line, rims, studs and 222: covers apart, Tilt's right side, which differs, not counted): 223: 224: | Line | Light plates | Medium | Heavy | Step | Rims light, medium, heavy | Covers | 225: |---|---|---|---|---|---|---| 226: | Harness | 26 | 48 | 73 | 1 : 1.8 : 2.8 | 19, 41, 76 | 7, 11, 13 | 227: | Estoc | 25 | 37 | 48 | 1 : 1.5 : 1.9 | 10, 15, 28 | 7, 11, 13 | 228: | Blazon | 26 | 44 | 73 | 1 : 1.7 : 2.8 | 11, 20, 46 | 7, 11, 13 | 229: | Tilt | 24 | 38 | 53 | 1 : 1.6 : 2.2 | 16, 28, 47 | 7, 11, 13 | 230: 231: The light is about a plate per segment with an arming sleeve under a bare cap. The medium puts a lame or a 232: wing on every main plate: a lame under the pauldron, the tasset, the cuisse and over the greave, a fan at the 233: elbow, a wing at the knee, cheek guards on the helm. The heavy stacks lames where the medium has one, bolts 234: add-ons over the cuisses, greaves, breast and vambraces (heater shaped and counterchanged on Blazon, fluted on 235: Harness, blades on Estoc, a bigger grandguard on Tilt), adds a bevor to the helm and plates over the pack's 236: tanks, and puts a rim on every hem. Estoc steps least in count on purpose: its heavy puts the extra mass into 237: one great leaf over a long mantle and keeps its surfaces smooth, since fragmenting them would turn it into 238: Harness. Each line keeps its own hero as it grows: Harness its lames, Estoc its leaf, Blazon its heraldic 239: fields and ailettes, Tilt its grandguard. 240: 241: ### The rule 242: 243: Now in docs/visual-language.md (Plates), for every maker, the common pattern included, with coverage by grade 244: and joint covers beside it: 245: 246: > **Weight grade is plate count and layering, then thickness.** Each grade up carries roughly half again 247: > to twice the plates of the one below, in the same motif. Light: about one plate per segment, the frame 248: > showing between them. Medium: a lame, a wing or a cap added to every main plate. Heavy: stacked lames 249: > where the medium has one, add-on plates bolted over the base plates (a second layer at the shoulders, 250: > chest, hips and shins) and the rims, rivets and edges that come with them. Bulk alone does not make a 251: > grade: a heavy that is a thick medium reads as the same machine at 300 m. 252: 253: 254: ## Sources 255: 256: Kit reviews (photos on a plain ground): 257: 258: - Gyan, MG YMS-15: https://www.dalong.net/reviews/mg/m90/m90_p_e.htm 259: - Epyon, MG OZ-13MS: https://www.dalong.net/reviews/mg/m145/m145_p_e.htm 260: - Schwalbe Graze, 1/100: https://www.dalong.net/reviews/ib/ib103/ib103_p_e.htm 261: - Kimaris, HG: https://www.dalong.net/reviews/ib/ibh11/ibh11_p_e.htm 262: - Vidar, HG: https://www.dalong.net/reviews/ib/ibh27/ibh27_p_e.htm 263: - Bael, HG: https://www.dalong.net/reviews/ib/ibh36/ibh36_p_e.htm 264: 265: Also consulted, not measured: the Kimaris Trooper (ib109) and MG Vidar (m224) reviews, and the 266: knightmare board already in review/out/refs/geass (docs/light-frames.md). 267: 268: Light and heavy fits (kit reviews): 269: 270: - MG Gundam ver 2.0: https://www.dalong.net/reviews/mg/m111/m111_p_e.htm 271: - MG Full Armor Gundam: https://www.dalong.net/reviews/mg/m133/m133_p_e.htm 272: - HG Graze (ground type): https://www.dalong.net/reviews/cg/cgh143/cgh143_p_e.htm 273: - HG Graze Ritter: https://www.dalong.net/reviews/cg/cgh117/cgh117_p_e.htm 274: - HG Graze Ein: https://www.dalong.net/reviews/ib/ibh18/ibh18_p_e.htm 275: - 1/100 Kimaris Trooper: https://www.dalong.net/reviews/ib/ib109/ib109_p_e.htm 276: 277: Historical harness, the Met's open access collection (public domain photos, read for principles): 278: 279: - Gothic armour, late 15th century: https://www.metmuseum.org/art/collection/search/23081 280: - Fluted armour, Nuremberg, ca. 1520: https://www.metmuseum.org/art/collection/search/24807 281: - Field armour, ca. 1525: https://www.metmuseum.org/art/collection/search/22001 282: - Garniture of Henry VIII, 1527: https://www.metmuseum.org/art/collection/search/22741 283: - Greenwich field armour, ca. 1587: https://www.metmuseum.org/art/collection/search/22138 284: - Pauldron, ca. 1525: https://www.metmuseum.org/art/collection/search/22302 285: - Light cavalry armour, ca. 1510: https://www.metmuseum.org/art/collection/search/22275 286: - Half armour, ca. 1510 to 20: https://www.metmuseum.org/art/collection/search/23090 287: - Three quarter armour, ca. 1525: https://www.metmuseum.org/art/collection/search/23199 288: - Armour for the joust of peace, ca. 1500: https://www.metmuseum.org/art/collection/search/35928 289: - Breastplates, ca. 1480 to 1545: https://www.metmuseum.org/art/collection/search/24826, 290: https://www.metmuseum.org/art/collection/search/23040, https://www.metmuseum.org/art/collection/search/22408
read_file{"Path":"~/work/sortie/docs/visual-language.md"}
input
{ "Path": "~/work/sortie/docs/visual-language.md" }result, 144 lines
Showing lines 1-143 of 143 1: # Visual language 2: 3: > **Status 2026-11-08: parked.** Mostly guessed rules from the first maker rounds. They don't bind the one-mech restart. [handbook.md](handbook.md) says which are earned. 4: 5: How every frame in sortie is built and painted, so that makers look distinct, parts look like 6: they do something, and the whole roster looks like one world. Lessons come from 7: docs/study-phantom-brigade.md. Makers and factions from docs/manufacturers.md and the wiki. 8: 9: ## Three layers 10: 11: Every frame is three layers, built separately: 12: 13: 1. **Inner frame.** The machine. One per size class, shared by every maker. 14: 2. **Plates.** The armour. One shell per segment, made per maker family and weight grade. 15: 3. **Livery.** The paint, markings and bearings. Set by the faction or company that fields it, 16: never by the maker. 17: 18: Cohesion comes from layer 1, identity from layer 2, allegiance from layer 3. 19: 20: ## Inner frame 21: 22: - One frame per size class (light, standard, heavy), carrying the 22 joint rig. 23: - Dark metal: the frame and joint roles. Never painted in livery colours. 24: - Mechanical and visible. Actuators and pistons at the hips and shoulders, joint housings at 25: every joint, cable runs along the long bones. 26: - Shows at the neck, waist, shoulders, elbows, wrists, knees and ankles on every frame. The 27: frame shows at the sides and back of each joint. The front of the knees and the back of the 28: elbows get a cap, and the cockpit gets a hatch. Cuffs and collars may overlap the shoulder, 29: neck, waist, wrist and ankle gaps in part. 30: - Carries the cockpit socket in the chest, the reactor bay behind it, and the standard mount 31: pads (below). 32: - Finished from behind too: what shows between plates is a spine housing, closed back panels, 33: covered mounts and cable runs in ducts, never a skeleton with holes. 34: - **Joint covers.** A plate family may dress the joints in a soft layer in the frame colour, as harness 35: has mail and an arming doublet under it: bellows or quilted sleeves at the waist, armpits, elbows and 36: neck, a hanging fauld at the hips broken at each leg, flat pads behind the knees. A gap between plates 37: then reads as a deliberate shadow, not as machinery. Covers stay dark and shallow: no rings round the 38: front of a joint, no folds deep enough to read as tyres or hoses. The frame's pistons and housings may 39: still show at the sides and back of a joint. Each family styles its covers (quilt, bellows, mail) and 40: every family's covers fit every frame (kit/lab/knightkit.py, joint_covers). 41: 42: ## Plates 43: 44: - One shell per segment, riding its own joint: head, chest, waist, pelvis, shoulder, upper arm, 45: forearm, thigh, shin, foot (sabaton and heel spur), backpack, binders. Hands stay bare frame. 46: - Large flat faces, one chamfer width per family. Curves only where the maker's motif calls 47: for them. 48: - Detail comes from the livery layer (stencils, panel markings), not from extra geometry. 49: - **No open shells.** A plate is a closed piece. Never hollow a shell so its inside shows, and a cut 50: face gets a closing cap in plate or frame colour. The head is a closed piece on every grade. 51: - **Weight grade is plate count and layering, then thickness.** Each grade up carries roughly half again 52: to twice the plates of the one below, in the same motif (docs/study-atelier.md, Grades by plate 53: count). Bulk alone does not make a grade: a heavy that is a thick medium reads as the same machine at 54: 300 m. Every grade looks finished from every angle, the back included. The head and the back step up 55: with the rest. 56: - Light: about one plate per segment, thin, the frame showing between them. Still covers the front 57: and the back of the torso, a rear skirt, the backs of the thighs and the calves. 58: - Medium: a lame, a wing or a cap added to every main plate, a front and a back plate on each limb. 59: - Heavy: stacked lames where the medium has one, add-on plates bolted over the base plates (a second 60: layer at the shoulders, chest, hips and shins) and the rims, studs and edges that come with them. 61: Gaps only at the joints, broader packs, a bevor and cheeks on the helm. 62: - **Coverage by grade.** Light shows its joints: the frame at the elbows, knees and neck, joint covers 63: only where a gap would be accidental (the waist, bare upper arms, behind the hips and knees). Medium 64: hides most of the frame: covers at the armpits, elbows, hips and neck too. Heavy closes almost 65: everything: covers at the ankles and wrists as well, the frame only at the backs and sides of joints. 66: - Joint gaps: the frame or its covers show at the sides and back of each joint. Every grade caps the 67: front of the knees and the back of the elbows (light small, heavy big and wrapping more) and 68: armours the cockpit with a hatch. 69: - Any grade fits any frame of its size class. Mixing grades is normal and must still look 70: intentional, so grades share the motif and the chamfer. 71: 72: ## Standard mount pads 73: 74: Every maker builds to the Administration's common pattern for mounts: the same pad shape at 75: the forearms (hand weapons), shoulders (shoulder weapons), backpack (thrusters) and hips 76: (holsters). The pad is part of the frame or plate and always reads the same. It ties makers 77: together and tells the player where weapons go. 78: 79: ## Function placement 80: 81: - Cockpit: a socket in the chest front, framed by the chest plate, ejects as a pod. An armoured 82: hatch in plate colour covers the socket and leaves with the pod. The seam round it shows the 83: pod outline. The houses' light frames put a core block cockpit at the back instead: a capsule on 84: docking lugs that ejects whole, the breastplate closed over the socket. 85: - Sensors in the head. The head shape is the maker's strongest single mark. 86: - Reactor vents on the chest sides or the back, bigger on reactor house parts. 87: - Thrusters on the backpack and binders, verniers on the shins and shoulders. 88: - Weapons only on mount pads. 89: 90: ## Maker motifs 91: 92: Two or three silhouette moves per maker, held across every plate and grade. Everything else on 93: the plate stays plain. 94: 95: | Maker | Moves | 96: |---|---| 97: | Common pattern | Rectangles with one 45 degree clip on the outboard top corner. A recessed service band across each main plate. Flat, square, standard issue. | 98: | Commerce yards | Thick slabs with rounded bumper edges. Grab rails and tool sockets. Stacked box volumes. | 99: | Military arsenal | Steeply sloped faces. Overlapping lames on shoulders and thighs. Spaced armour with a visible gap. No rounded edges. | 100: | Houses' atelier | Built to order per house in four lines on one motif: plates domed in two directions (no straight cones or flat cards), rolled and roped rims, a crest on the helm, a small helm sunk between broad pauldrons, a pinched waist, long greaves flaring to a bell. Harness: gothic plate, fluted domes over lames. Estoc: few smooth shapes ending in points. Blazon: big heraldic shapes painted per pale. Tilt: lopsided tourney harness, a grandguard and a frog mouth great helm (docs/study-atelier.md). | 101: | Science works | Thin plates on open lattice. Sensor discs and field emitter rings. Asymmetry allowed. | 102: | Reactor house | Radiator fins and vent slats on every plate. Light in the seams. | 103: | Refitter | Other makers' plates with weld seams and refit plates bolted over. Mismatched on purpose. | 104: | The Foundry | One continuous shell, no visible frame (docs/factions.md). The one exception to the gap rule. | 105: 106: ## Livery 107: 108: - Set by the faction or company, applied through palette roles in `src/render/palette.ts`. 109: A faction's frames always wear its livery, whoever made the plates. 110: - **Main** (field colour) about 70 percent of the plates, **accent** about 20, **trim** thin 111: lines only. 112: - **Colour blocking.** Accent goes on in a few big blocks a plate family assigns by role, not 113: scattered over small faces: the upper chest with the hatch, the boots, a panel on the back, a head 114: detail. The line mechs get their character from this (the GM's red chest and boots on white, the 115: Jegan's two greens). The collar and the pauldrons stay main, so the head and shoulders stand off the 116: chest block. Every faction repaints the same roles, so the accent must keep a clear value step from 117: main in every palette (the automatons' gunmetal against their black included). 118: - **Legs.** Accent on the legs only as long panels running down the leg (shin fronts, outer thighs) and 119: as the boot. Never a band across the leg: the knee, the thigh's lower edge and the shin cuff stay 120: main. A knee cap in accent reads as a band and cuts the leg in two (round 7). Long panels and boots 121: keep the leg one mass and still carry the livery (round 8). 122: - **Stencil**: unit codes, pattern codes, service markings. A decal layer, separate from the 123: plate geometry. 124: - **Bearings**: the faction's insignia on the left shoulder and the chest. A merc company's mark 125: on the right shoulder. Every plate family provides the same anchor points so bearings land in 126: the same places on every maker's plates. 127: - The frame stays dark metal in every livery. Plates must keep a clear value step from the 128: frame. A dark livery lightens the frame role, a light livery darkens it. 129: - Mercs paint in company colours and may add the employer's band for a contract. 130: 131: ## Proportions 132: 133: Measured from line mechs in docs/study-proportions.md. For a plain standard class frame: head a 134: tenth of the height with the chin at the pauldron tops, shoulder span .45, crotch .54, knee joint 135: .39, so a short thigh under the skirt over a long shin. The lower leg is the widest part of the leg, 136: the feet as wide, the waist a block. Accent on the legs only as long panels and the boot, never a 137: band across them (Livery). 138: 139: ## Reading distances 140: 141: - 2 km: silhouette and size class. 142: - 300 m: maker motif and livery colours. 143: - 50 m: bearings, stencils, mount pads.
read_file{"Path":"~/work/sortie/docs/light-frames.md"}
input
{ "Path": "~/work/sortie/docs/light-frames.md" }result, 208 lines
Showing lines 1-207 of 207 1: # Light frames: Code Geass reference study 2: 3: > **Status 2026-11-08: reference.** Measurements used by the light class. See [handbook.md](handbook.md). 4: 5: What a knightmare frame is made of, measured from official line art and design sheets, and what 6: sortie's light class takes from it. Board: `review/out/refs/geass-board-*.jpg` (gitignored, 30 7: tiles). Sources: official site design sheets (front, back, parts), TV and model kit line art, 8: settei sketches for heads, cockpit, landspinners and harkens. Measured images: Sutherland, 9: Glasgow (front and back), Gloucester, Lancelot, Guren, Vincent, Alexander (back). 10: 11: Confidence: medium. The line art is mostly three-quarter standing poses on a low camera. Reads of 12: +-3% on heights and +-0.03 on widths are normal. Ratios between frames are safer than any single 13: number. 14: 15: ## Official sizes 16: 17: | frame | role | height | weight | 18: |---|---|---|---| 19: | Glasgow | 4th gen grunt | 4.24 m | 7.35 t | 20: | Gloucester | 5th gen officer grunt | 4.29 m | 7.75 t | 21: | Burai | Glasgow refit | 4.37 m | 7.48 t | 22: | Sutherland | 5th gen grunt | 4.39 m | 7.48 t | 23: | Alexander | 7th gen, Akito | 4.39 m | 6.73 t | 24: | Vincent, Vincent Ward | 7th gen grunt | 4.44 m | 6.9 to 7.0 t | 25: | Gekka, Akatsuki | Japanese 7th gen | 4.45 to 4.49 m | 7.8 to 7.9 t | 26: | Lancelot | 7th gen lead | 4.49 m | 6.89 t | 27: | Guren | 7th gen lead | 4.51 m | 7.51 t | 28: | Shinkiro | 8th gen lead | 4.67 m | 8.06 t | 29: | Mordred | 8th gen heavy | 4.71 m | 10.23 t | 30: | Lancelot Albion | 9th gen lead | 5.15 m | 9.12 t | 31: | Tristan | 8th gen transformer | 5.45 m | 7.35 t | 32: | Gawain | 6th gen two-seater | 6.57 m | 14.57 t | 33: | Gareth | Gawain-line grunt | 6.94 m | 14.78 t | 34: | Galahad | Gawain-line lead | 7.20 m | 15.20 t | 35: 36: Everything mainline is 4.2 to 4.7 m: two and a half humans. A pilot standing beside a Sutherland 37: reaches its knee. Only the Gawain line is over 6 m and those read as a heavier class in the show 38: (two seats, cannons, twice the weight). Sortie's 6 m light is already a Gawain-class knightmare, 39: not a Sutherland. 40: 41: ## Measured proportions 42: 43: Fractions of total height, measured from the soles. Widths are fractions of height too. 44: "Block top" is the top of the rear cockpit block. 45: 46: | frame (image) | head h | chin at | shoulder w | waist w | hip pivot | crotch | knee | hand bottom | block top | foot module | 47: |---|---|---|---|---|---|---|---|---|---|---| 48: | Sutherland (suth-04) | 0.12 | 0.86 | 0.50 | 0.17 | 0.55 | 0.52 | 0.30 | 0.43 | 0.92 | 0.10 | 49: | Glasgow front (glas-03) | 0.13 | 0.87 | 0.52 | 0.20 | 0.58 | 0.55 | 0.33 | 0.50 | 0.92 | 0.20 | 50: | Gloucester (glou-03) | 0.11 | 0.87 | 0.50 | 0.17 | 0.55 | 0.52 | 0.30 | 0.45 | 0.96 | 0.12 | 51: | Lancelot (lanc-06) | 0.12 | 0.79 | 0.48 | 0.14 | 0.55 | 0.50 | 0.28 | 0.43 | 0.91 | 0.10 | 52: | Guren (guren-03) | 0.16 | 0.82 | 0.55 | 0.16 | 0.53 | 0.48 | 0.25 | 0.36 | 0.98 | 0.08 | 53: | Vincent (vinc-02) | 0.11 | 0.82 | 0.52 | 0.15 | 0.57 | 0.50 | 0.28 | 0.40 | 0.97 | 0.10 | 54: | Alexander back (alex-02) | 0.10 | 0.88 | 0.45 | 0.14 | 0.55 | 0.50 | 0.39 | 0.50 | 1.00 | 0.18 | 55: | **grunt mean** | 0.12 | 0.87 | 0.51 | 0.18 | 0.56 | 0.53 | 0.31 | 0.46 | 0.93 | 0.14 | 56: | **lead mean** | 0.13 | 0.81 | 0.52 | 0.15 | 0.55 | 0.49 | 0.27 | 0.40 | 0.95 | 0.09 | 57: 58: Head height includes the crest. Guren's 0.16 is its swept crest, the helmet alone is 0.11. 59: 60: Readings: 61: 62: - **Hip at 55%.** Every frame, grunt or lead, pivots the hip at 0.53 to 0.58 and the crotch sits 63: at about 0.50. That matches sizes.md's 54% for the light class. It is lower than the striker's 64: 0.60: knightmares are not leggy, they are long-armed. 65: - **Head 0.11 to 0.13 of height**, 8 to 9 heads tall counting the crest. The helmet alone is about 66: 0.10, so a plain head makes the frame 10 heads tall. sizes.md's 1/8 is right if the crest counts. 67: - **Long arms.** Hands hang at 0.40 to 0.50, below the crotch on all of them and down to the knee 68: on Guren. Gundams hang at 0.55 to 0.58. This is the single biggest proportional difference and 69: it is what makes a knightmare read as a stooped, simian fighter rather than a standing soldier. 70: - **Shins and knee.** Knee at 0.25 to 0.33 and hip at 0.55, so thigh and shin are equal at about 71: 0.25 each. Leads drop the knee a little for a longer shin. The shin is slim and the calf is a 72: flat plate with the landspinner mount behind it. 73: - **Shoulders 0.5 of height**, same as a Gundam, but reached with pauldrons rather than a wide 74: chest. Chest width under the pauldrons is only 0.25 to 0.30, waist 0.15 to 0.20. Grunts are 75: waistier than leads. 76: - **Cockpit block.** A box behind the torso, 0.70 to 0.95 of height tall (about 1.0 m on a 4.4 m 77: frame), 0.30 to 0.32 of height wide (1.3 m) and about as deep. Its top is level with or above 78: the head on every frame. From the back it is the whole upper body: shoulders, head and arms are 79: attached to it. From the side it doubles the depth of the torso. The Sutherland's is a flat box 80: with a hatch panel, the Lancelot's a smooth pod, the Alexander's a long capsule, but all sit in 81: the same place at the same size. 82: - **Landspinners.** Wheel diameter 0.12 to 0.13 of height (about 0.55 m), hub behind and below 83: the ankle, the wheel is wider than the foot. The whole foot module (toe to the top of the wheel 84: mount) is 0.10 to 0.20 of height. Grunts and the Alexander show the wheel fully, leads tuck it 85: into a blade-shaped heel. 86: - **Harkens.** Chest sides at 0.70 to 0.78 of height, outboard of the chest and under the 87: pauldron, muzzles facing forward. Lancelot adds a pair at the wrists. The anchor head is a blade 88: about 0.10 of height long (0.45 m). Fired they trail a cable several frame heights long. 89: 90: ## Design grammar: what makes a knightmare read as one 91: 92: 1. **Hunched, long-armed stance.** Head forward and low, shoulders high, arms past the crotch, the 93: torso tilted forward of the hips. The cockpit block pushes the centre of mass back, so the 94: silhouette leans into it. A knightmare standing straight looks wrong. 95: 2. **The block is the back.** The rear cockpit block is bigger than the chest. Its top edge rises 96: behind the head and its sides stick out past the shoulders on grunts. Harkens and the 97: float unit mount to it. 98: 3. **Helmet, not face.** Grunts have a sensor pod the size of the pilot's whole cockpit hatch: 99: Sutherland and Glasgow carry a rabbit-eared pod with four lenses, Gloucester a conical helm 100: with a visor slit and four eyes. Leads get a knight's helm with a crest: Lancelot's winged 101: brow, Vincent's twin horns, Guren's swept hair. No V-fin, no mouth. The factsphere is a 102: separate sensor, usually in the chest, a hemisphere behind shutters that fold open. 103: 4. **Wheel feet.** Big heel wheels and long flat toes. The frame moves like a skater, knees bent. 104: The wheels decide the leg shape: a straight shin with a mount behind the calf. 105: 5. **Knightly armour on a mechanical frame.** Leads: pointed pauldrons, tassets over the hips, 106: greaves with a pointed knee, a narrow waist. Grunts: the same places but boxy, slabs with 107: straight edges, one visor and one shoulder vent. Armour is thin: lots of exposed joint 108: mechanics at the hip, knee and elbow, and the limbs are tubes with plates on the outer faces 109: only. 110: 6. **Colour blocking.** Grunts: one body colour (Sutherland purple, Glasgow grey, Gloucester 111: plum, Ward violet), dark grey joints, a single red or black trim at the chest. Leads: white or 112: a hero colour with gold trim on every edge, dark grey inner frame, one red gem in the chest. 113: Trim traces the armour edge and the crest, never panels. 114: 7. **Grunts vs leads.** Grunts are wider at the waist, boxier, shorter-shinned, with the block 115: and wheels exposed. Leads are smoother, sleeker, taller in the shin, with the block pod-shaped 116: and the wheels hidden in a blade heel. Both share the stance, the block, the harkens and the 117: wheels, which is why they read as one family. 118: 8. **Float unit.** A winged pack hung on the block: two long angled blades bigger than the 119: torso, with a thruster core between them. It makes the frame a flying wedge from the back 120: and does not change the front silhouette much. 121: 9. **Cockpit.** Pilot sits upright on a bike seat with screens on three sides, inside the box. The 122: whole box fires out backwards on a rocket and lands under a chute. The hatch is the back face 123: of the block. 124: 125: ## Take, adapt, avoid 126: 127: For each trait: take as a trait, adapt to sortie, avoid because it makes a lookalike. 128: 129: 1. **Stance.** Take: hip at 54%, hands at 0.42, knee at 0.28, head low and forward with the 130: shoulders above the chin. Adapt: lean the torso 10 degrees forward of the hips in the rest 131: pose so the block reads from the front. Avoid: the exact rabbit-pod head angle and the fixed 132: stoop. A space frame stands straighter in zero g. 133: 2. **Core block.** Take: a block 1/4 of height tall, 1/3 wide, 1/4 deep behind the chest, top at 134: or above the head. The whole block ejects. Adapt: make it a module with its own hull colour so 135: the pilot's part reads as a vehicle inside a frame, and let it carry the harkens and the float 136: pack hardpoints. Avoid: the Sutherland's hatch panel with a horizontal slot and the Lancelot's 137: egg pod shape in white and gold. 138: 3. **Harkens.** Take: a pair on the block sides under the pauldrons, muzzles forward, anchor blade 139: 0.1 of height. Adapt: in space the cable is the weapon, so give the muzzle a visible reel 140: housing and make the anchor a claw rather than a blade. Avoid: Lancelot's four-harken layout 141: with wrist pairs in gold. 142: 4. **Spinners.** Take: a wheel 0.12 of height at the heel, a flat long toe, knees bent when 143: rolling. Adapt: magnetic hull wheels, so put a second small wheel under the toe and give the 144: wheels a lit rim. Avoid: the swing-down hinged wheel from the Glasgow, which is the show's 145: signature mechanism. 146: 5. **Head.** Take: a helmet with a brow and a single visor slit, a crest that breaks the outline, 147: the eyes recessed under the brow (heads.md 2, 4, 5). Adapt: use the hood family already chosen 148: and add the crest as a swappable part. Avoid: the rabbit-ear sensor pod with four lenses, the 149: Gloucester cone, the Lancelot wing brow. 150: 6. **Factsphere.** Take: a shuttered sensor hemisphere that opens for scan mode. Adapt: mount it 151: in the chest plate for grunts and in the brow for leads, so it doubles as a faction marker. 152: Avoid: the green glass dome with the orange iris. 153: 7. **Armour layering.** Take: thin plates on outer faces only, exposed joints at hip, knee, 154: elbow, pointed pauldrons and tassets on leads, slabs on grunts. Adapt: fewer, larger plates 155: than the striker, as sizes.md already says, so a 6 m frame keeps the same detail density. 156: Avoid: gold edge trim on white, which is the Lancelot in one glance. 157: 8. **Colour blocking.** Take: one body colour plus dark joints plus one trim accent at the chest 158: for grunts, and trim along armour edges for leads. Adapt: use the palette roles already in 159: `src/render/palette.ts`, with the block in a second body tone. Avoid: Britannian purple with 160: a red chest, red with an orange crest, white with gold. 161: 9. **Float pack.** Take: a winged pack on the block, blades longer than the torso, that changes 162: the back silhouette and not the front. Adapt: make it the required space kit for the light 163: class, with the blades doubling as radiators. Avoid: the two-blade red Britannian unit and 164: Albion's energy wings. 165: 10. **Grunt vs lead.** Take: same skeleton, grunts boxier and waistier with the mechanics 166: exposed, leads smoother with a longer shin. Adapt: this is the faction grunt rule for the 167: light class. Avoid: nothing here, the rule is generic. 168: 169: ## Next to an 18 m mobile suit 170: 171: No official crossover art puts a knightmare beside a Gundam at scale. Super Robot Wars sprites 172: are not to scale. The composed chart on the board (`zz-scale-chart-composed.jpg`) uses the 173: official heights. 174: 175: - A 4.4 m Sutherland reaches an 18 m Gundam's knee. A 7.2 m Galahad reaches its thigh. A 6 m 176: frame reaches the knee cap, a 9 m frame the crotch. 177: - Weight scales worse than height. Knightmares are 7 t against a mobile suit's 50 to 60 t. A 6 m 178: knightmare-built frame would be about 15 t, a 9 m one about 30 t. 179: - Cockpit block sizing fixes a floor. The block must hold a seated pilot and screens, about 1.0 m 180: by 1.3 m by 1.0 m. That is 0.25 of height on a 4.4 m frame and 0.17 on a 6 m frame. At 9 m 181: it is 0.11 of height and no longer dominates the back: the trait that sizes.md calls out is 182: gone, or the block has to be padded with equipment to keep its visual size. 183: - Harkens and spinners scale with the frame, so they keep their proportions at any size. The 184: pilot does not, so the human-scale cues (hatch, seat, ladder rungs) are the only size tell. 185: 186: ### 6 m or 9 m 187: 188: Recommend 6 m. Reasons: 189: 190: - 6 m is already a Gawain-class knightmare. Pushing to 9 m makes the light frame half a striker 191: and the block, the main light-class trait, stops dominating the silhouette. 192: - The 1/3 ratio (6 of 17.6) is a different kind of fight, which is the point of the class. 9 m is 193: half size, which reads as a small striker, not a different animal. 194: - Two 6 m frames fit a 12 m bay side by side with a metre to spare. Two 9 m frames do not. 195: - The hit radius and the camera already set 18 m as the mid-scale. At 6 m a light frame can use 196: hull geometry (gantries, doors, pipes) as cover and anchor points. At 9 m it mostly cannot. 197: 198: If 6 m turns out too small on screen, raise the block and crest, not the frame: a knightmare's 199: visual height is its block top, which is 0.95 to 1.0 of its height. 200: 201: ## Open points for the light designer 202: 203: - Rest pose: how far forward the torso leans. The references lean 10 to 15 degrees. 204: - Whether the harkens sit on the block or the chest. On the block they move with the ejectable 205: module, which is a nice story but means the chest reads plain from the front. 206: - Spinner wheel size at 6 m: 0.12 of height is 0.7 m, larger than a car wheel, which looks right 207: on hull surfaces.
agent
+0:34reasoning
Initial inspection targets the new tools and existing view code. The aim is to understand how the new functionality integrates with the existing components for generating and displaying content. Review will focus on understanding the data flow between tools, clipping logic, and rendering pipelines.