reasoning

The silhouette issue in frame_246.jpg is clearly tied to the z coordinate in build_pelvis, specifically the f_skirt bottom row terminating at z = 9. This explains the truncated look. This is also confirmed by a comparison with build_legs z-values.

The f_skirt bottom row's z value needed adjustment to match the intended silhouette. Extending it to z = 9.48, with specific z values for the chevron, ensures correct clearance for the thigh pitch. Next, the focus shifted to the legs' construction; the inner thigh's starting x values needed refinement for a more athletic appearance.

  • edit_file{"Path":"~/work/sortie/kit/carbon_mech.py","Replacement":" # Split compound-curved front chevron aero-faulds (swept forward for clean flight thigh clearance)\n f_skirt = patch_shell(\n [\n [(0.36, -1.16, 10.84), (1.14, -1.12, 10.82), (1.84, -0.88, 10.70)],\n [(0.40, -1.40, 10.28), (1.28, -1.42, 10.20), (2.04, -1.06, 10.08)],\n [(0.48, -1.46, 9.68), (1.36, -1.52, 9.42), (1.92, -1.16, 9.56)],\n ],\n thickness=0.078,\n row_creases={1: 0.82},\n outward=(0.25, -1.0, 0.1),\n )\n fs_lo, fs_hi = halves(f_skirt, (1.1, -1.35, 10.02), (-0.22, 0.08, 1.0), gap=0.032)\n put_pair(\"skirt_front_hi\", fs_hi, \"main\", P, P, bevel=0.014)\n put_pair(\"skirt_front_lo\", fs_lo, \"accent\", P, P, bevel=0.012)\n tab = patch_shell(\n [\n [(1.52, -1.38, 9.66), (1.90, -1.14, 9.58)],\n [(1.40, -1.48, 9.44), (1.78, -1.22, 9.38)],\n ],\n thickness=0.055,\n subd_levels=1,\n outward=(0.3, -1, -0.1),\n )\n put_pair(\"skirt_front_trim\", tab, \"trim\", P, P, bevel=0.008)","Target":" # Split compound-curved front chevron aero-faulds (swept forward for clean flight thigh clearance)\n f_skirt = patch_shell(\n [\n [(0.42, -1.16, 10.82), (1.12, -1.12, 10.80), (1.76, -0.88, 10.68)],\n [(0.46, -1.36, 10.42), (1.26, -1.34, 10.34), (1.96, -1.02, 10.20)],\n [(0.54, -1.42, 9.98), (1.38, -1.42, 9.80), (1.82, -1.10, 9.72)],\n ],\n thickness=0.075,\n row_creases={1: 0.80},\n outward=(0.25, -1.0, 0.1),\n )\n fs_lo, fs_hi = halves(f_skirt, (1.1, -1.3, 10.16), (-0.22, 0.08, 1.0), gap=0.032)\n put_pair(\"skirt_front_hi\", fs_hi, \"main\", P, P, bevel=0.014)\n put_pair(\"skirt_front_lo\", fs_lo, \"accent\", P, P, bevel=0.012)\n tab = patch_shell(\n [\n [(1.52, -1.30, 9.88), (1.84, -1.08, 9.78)],\n [(1.42, -1.38, 9.72), (1.74, -1.14, 9.62)],\n ],\n thickness=0.055,\n subd_levels=1,\n outward=(0.3, -1, -0.1),\n )\n put_pair(\"skirt_front_trim\", tab, \"trim\", P, P, bevel=0.008)"}

    input

    {
      "Path": "~/work/sortie/kit/carbon_mech.py",
      "Replacement": "    # Split compound-curved front chevron aero-faulds (swept forward for clean flight thigh clearance)\n    f_skirt = patch_shell(\n        [\n            [(0.36, -1.16, 10.84), (1.14, -1.12, 10.82), (1.84, -0.88, 10.70)],\n            [(0.40, -1.40, 10.28), (1.28, -1.42, 10.20), (2.04, -1.06, 10.08)],\n            [(0.48, -1.46, 9.68), (1.36, -1.52, 9.42), (1.92, -1.16, 9.56)],\n        ],\n        thickness=0.078,\n        row_creases={1: 0.82},\n        outward=(0.25, -1.0, 0.1),\n    )\n    fs_lo, fs_hi = halves(f_skirt, (1.1, -1.35, 10.02), (-0.22, 0.08, 1.0), gap=0.032)\n    put_pair(\"skirt_front_hi\", fs_hi, \"main\", P, P, bevel=0.014)\n    put_pair(\"skirt_front_lo\", fs_lo, \"accent\", P, P, bevel=0.012)\n    tab = patch_shell(\n        [\n            [(1.52, -1.38, 9.66), (1.90, -1.14, 9.58)],\n            [(1.40, -1.48, 9.44), (1.78, -1.22, 9.38)],\n        ],\n        thickness=0.055,\n        subd_levels=1,\n        outward=(0.3, -1, -0.1),\n    )\n    put_pair(\"skirt_front_trim\", tab, \"trim\", P, P, bevel=0.008)",
      "Target": "    # Split compound-curved front chevron aero-faulds (swept forward for clean flight thigh clearance)\n    f_skirt = patch_shell(\n        [\n            [(0.42, -1.16, 10.82), (1.12, -1.12, 10.80), (1.76, -0.88, 10.68)],\n            [(0.46, -1.36, 10.42), (1.26, -1.34, 10.34), (1.96, -1.02, 10.20)],\n            [(0.54, -1.42, 9.98), (1.38, -1.42, 9.80), (1.82, -1.10, 9.72)],\n        ],\n        thickness=0.075,\n        row_creases={1: 0.80},\n        outward=(0.25, -1.0, 0.1),\n    )\n    fs_lo, fs_hi = halves(f_skirt, (1.1, -1.3, 10.16), (-0.22, 0.08, 1.0), gap=0.032)\n    put_pair(\"skirt_front_hi\", fs_hi, \"main\", P, P, bevel=0.014)\n    put_pair(\"skirt_front_lo\", fs_lo, \"accent\", P, P, bevel=0.012)\n    tab = patch_shell(\n        [\n            [(1.52, -1.30, 9.88), (1.84, -1.08, 9.78)],\n            [(1.42, -1.38, 9.72), (1.74, -1.14, 9.62)],\n        ],\n        thickness=0.055,\n        subd_levels=1,\n        outward=(0.3, -1, -0.1),\n    )\n    put_pair(\"skirt_front_trim\", tab, \"trim\", P, P, bevel=0.008)"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/kit/carbon_mech.py starting at line 50 (+9/-9 lines).
  • edit_file{"Path":"~/work/sortie/kit/carbon_mech.py","Replacement":" # Front & outer compound-curved thigh carapace\n thigh_front = patch_shell(\n [\n [(0.44, -0.46, 10.08), (1.18, -1.08, 10.14), (2.06, -0.46, 10.02), (2.18, 0.38, 9.94)],\n [(0.42, -0.52, 8.85), (1.22, -1.20, 8.92), (2.20, -0.50, 8.84), (2.26, 0.44, 8.80)],\n [(0.54, -0.44, 7.18), (1.20, -1.00, 7.14), (1.90, -0.42, 7.18), (1.96, 0.34, 7.22)],\n ],\n thickness=0.088,\n col_creases={1: 0.88, 2: 0.72},\n outward=(0.35, -1.0, 0.0),\n )\n tf_lo, tf_hi = halves(thigh_front, (1.2, -0.8, 9.32), (-0.22, 0.12, 1.0), gap=0.034)\n put_pair(\"thigh_cuff_top\", tf_hi, \"accent\", TL, TR, bevel=0.014)\n tf_mid_lo, tf_mid_hi = halves(tf_lo, (1.2, -0.8, 8.12), (0.24, -0.10, 1.0), gap=0.034)\n put_pair(\"thigh_plate_up\", tf_mid_hi, \"main\", TL, TR, bevel=0.014)\n put_pair(\"thigh_plate_low\", tf_mid_lo, \"main\", TL, TR, bevel=0.014)\n\n # Inner medial femoral carapace plate closing inner thigh frame cleanly\n thigh_in = patch_shell(\n [\n [(0.46, -0.40, 9.86), (0.38, 0.02, 9.88), (0.50, 0.42, 9.84)],\n [(0.44, -0.44, 8.62), (0.36, 0.02, 8.64), (0.50, 0.44, 8.60)],\n [(0.56, -0.38, 7.24), (0.48, 0.02, 7.24), (0.60, 0.38, 7.22)],\n ],\n thickness=0.068,\n col_creases={1: 0.75},\n outward=(-1.0, 0.0, 0.0),\n )\n put_pair(\"thigh_in_plate\", thigh_in, \"main\", TL, TR, bevel=0.012)\n\n # Outer thigh trim strake\n t_strake = aero_loft([\n [(2.14, -0.12, 7.85), (2.28, -0.08, 7.88), (2.28, 0.34, 7.88), (2.14, 0.38, 7.85)],\n [(2.22, -0.16, 9.18), (2.38, -0.10, 9.15), (2.38, 0.38, 9.15), (2.22, 0.42, 9.18)],\n ], samples_per_span=2)\n put_pair(\"thigh_strake\", t_strake, \"trim\", TL, TR, bevel=0.008)\n\n # Rear hamstring split shell + recessed hamstring cooling louvers\n thigh_rear = patch_shell(\n [\n [(0.50, 0.44, 9.88), (1.22, 0.98, 9.92), (2.04, 0.48, 9.84)],\n [(0.52, 0.46, 8.62), (1.22, 1.04, 8.64), (2.02, 0.50, 8.60)],\n [(0.62, 0.40, 7.12), (1.20, 0.84, 7.08), (1.84, 0.42, 7.12)],\n ],\n thickness=0.078,\n col_creases={1: 0.82},\n outward=(0, 1, 0),\n )","Target":" # Front & outer compound-curved thigh carapace\n thigh_front = patch_shell(\n [\n [(0.58, -0.46, 10.06), (1.18, -1.04, 10.12), (1.96, -0.46, 10.02), (2.06, 0.36, 9.94)],\n [(0.54, -0.52, 8.85), (1.22, -1.16, 8.92), (2.08, -0.50, 8.84), (2.14, 0.42, 8.80)],\n [(0.68, -0.44, 7.22), (1.20, -0.96, 7.18), (1.78, -0.42, 7.22), (1.84, 0.32, 7.26)],\n ],\n thickness=0.085,\n col_creases={1: 0.88, 2: 0.72},\n outward=(0.35, -1.0, 0.0),\n )\n tf_lo, tf_hi = halves(thigh_front, (1.2, -0.8, 9.32), (-0.22, 0.12, 1.0), gap=0.034)\n put_pair(\"thigh_cuff_top\", tf_hi, \"accent\", TL, TR, bevel=0.014)\n tf_mid_lo, tf_mid_hi = halves(tf_lo, (1.2, -0.8, 8.12), (0.24, -0.10, 1.0), gap=0.034)\n put_pair(\"thigh_plate_up\", tf_mid_hi, \"main\", TL, TR, bevel=0.014)\n put_pair(\"thigh_plate_low\", tf_mid_lo, \"main\", TL, TR, bevel=0.014)\n\n # Outer thigh trim strake\n t_strake = aero_loft([\n [(2.04, -0.12, 7.85), (2.16, -0.08, 7.88), (2.16, 0.34, 7.88), (2.04, 0.38, 7.85)],\n [(2.12, -0.16, 9.18), (2.26, -0.10, 9.15), (2.26, 0.38, 9.15), (2.12, 0.42, 9.18)],\n ], samples_per_span=2)\n put_pair(\"thigh_strake\", t_strake, \"trim\", TL, TR, bevel=0.008)\n\n # Rear hamstring split shell + recessed hamstring cooling louvers\n thigh_rear = patch_shell(\n [\n [(0.62, 0.44, 9.88), (1.22, 0.96, 9.92), (1.92, 0.48, 9.84)],\n [(0.64, 0.46, 8.62), (1.22, 1.00, 8.64), (1.90, 0.50, 8.60)],\n [(0.74, 0.40, 7.12), (1.20, 0.80, 7.08), (1.72, 0.42, 7.12)],\n ],\n thickness=0.075,\n col_creases={1: 0.82},\n outward=(0, 1, 0),\n )"}

    input

    {
      "Path": "~/work/sortie/kit/carbon_mech.py",
      "Replacement": "    # Front & outer compound-curved thigh carapace\n    thigh_front = patch_shell(\n        [\n            [(0.44, -0.46, 10.08), (1.18, -1.08, 10.14), (2.06, -0.46, 10.02), (2.18, 0.38, 9.94)],\n            [(0.42, -0.52, 8.85), (1.22, -1.20, 8.92), (2.20, -0.50, 8.84), (2.26, 0.44, 8.80)],\n            [(0.54, -0.44, 7.18), (1.20, -1.00, 7.14), (1.90, -0.42, 7.18), (1.96, 0.34, 7.22)],\n        ],\n        thickness=0.088,\n        col_creases={1: 0.88, 2: 0.72},\n        outward=(0.35, -1.0, 0.0),\n    )\n    tf_lo, tf_hi = halves(thigh_front, (1.2, -0.8, 9.32), (-0.22, 0.12, 1.0), gap=0.034)\n    put_pair(\"thigh_cuff_top\", tf_hi, \"accent\", TL, TR, bevel=0.014)\n    tf_mid_lo, tf_mid_hi = halves(tf_lo, (1.2, -0.8, 8.12), (0.24, -0.10, 1.0), gap=0.034)\n    put_pair(\"thigh_plate_up\", tf_mid_hi, \"main\", TL, TR, bevel=0.014)\n    put_pair(\"thigh_plate_low\", tf_mid_lo, \"main\", TL, TR, bevel=0.014)\n\n    # Inner medial femoral carapace plate closing inner thigh frame cleanly\n    thigh_in = patch_shell(\n        [\n            [(0.46, -0.40, 9.86), (0.38, 0.02, 9.88), (0.50, 0.42, 9.84)],\n            [(0.44, -0.44, 8.62), (0.36, 0.02, 8.64), (0.50, 0.44, 8.60)],\n            [(0.56, -0.38, 7.24), (0.48, 0.02, 7.24), (0.60, 0.38, 7.22)],\n        ],\n        thickness=0.068,\n        col_creases={1: 0.75},\n        outward=(-1.0, 0.0, 0.0),\n    )\n    put_pair(\"thigh_in_plate\", thigh_in, \"main\", TL, TR, bevel=0.012)\n\n    # Outer thigh trim strake\n    t_strake = aero_loft([\n        [(2.14, -0.12, 7.85), (2.28, -0.08, 7.88), (2.28, 0.34, 7.88), (2.14, 0.38, 7.85)],\n        [(2.22, -0.16, 9.18), (2.38, -0.10, 9.15), (2.38, 0.38, 9.15), (2.22, 0.42, 9.18)],\n    ], samples_per_span=2)\n    put_pair(\"thigh_strake\", t_strake, \"trim\", TL, TR, bevel=0.008)\n\n    # Rear hamstring split shell + recessed hamstring cooling louvers\n    thigh_rear = patch_shell(\n        [\n            [(0.50, 0.44, 9.88), (1.22, 0.98, 9.92), (2.04, 0.48, 9.84)],\n            [(0.52, 0.46, 8.62), (1.22, 1.04, 8.64), (2.02, 0.50, 8.60)],\n            [(0.62, 0.40, 7.12), (1.20, 0.84, 7.08), (1.84, 0.42, 7.12)],\n        ],\n        thickness=0.078,\n        col_creases={1: 0.82},\n        outward=(0, 1, 0),\n    )",
      "Target": "    # Front & outer compound-curved thigh carapace\n    thigh_front = patch_shell(\n        [\n            [(0.58, -0.46, 10.06), (1.18, -1.04, 10.12), (1.96, -0.46, 10.02), (2.06, 0.36, 9.94)],\n            [(0.54, -0.52, 8.85), (1.22, -1.16, 8.92), (2.08, -0.50, 8.84), (2.14, 0.42, 8.80)],\n            [(0.68, -0.44, 7.22), (1.20, -0.96, 7.18), (1.78, -0.42, 7.22), (1.84, 0.32, 7.26)],\n        ],\n        thickness=0.085,\n        col_creases={1: 0.88, 2: 0.72},\n        outward=(0.35, -1.0, 0.0),\n    )\n    tf_lo, tf_hi = halves(thigh_front, (1.2, -0.8, 9.32), (-0.22, 0.12, 1.0), gap=0.034)\n    put_pair(\"thigh_cuff_top\", tf_hi, \"accent\", TL, TR, bevel=0.014)\n    tf_mid_lo, tf_mid_hi = halves(tf_lo, (1.2, -0.8, 8.12), (0.24, -0.10, 1.0), gap=0.034)\n    put_pair(\"thigh_plate_up\", tf_mid_hi, \"main\", TL, TR, bevel=0.014)\n    put_pair(\"thigh_plate_low\", tf_mid_lo, \"main\", TL, TR, bevel=0.014)\n\n    # Outer thigh trim strake\n    t_strake = aero_loft([\n        [(2.04, -0.12, 7.85), (2.16, -0.08, 7.88), (2.16, 0.34, 7.88), (2.04, 0.38, 7.85)],\n        [(2.12, -0.16, 9.18), (2.26, -0.10, 9.15), (2.26, 0.38, 9.15), (2.12, 0.42, 9.18)],\n    ], samples_per_span=2)\n    put_pair(\"thigh_strake\", t_strake, \"trim\", TL, TR, bevel=0.008)\n\n    # Rear hamstring split shell + recessed hamstring cooling louvers\n    thigh_rear = patch_shell(\n        [\n            [(0.62, 0.44, 9.88), (1.22, 0.96, 9.92), (1.92, 0.48, 9.84)],\n            [(0.64, 0.46, 8.62), (1.22, 1.00, 8.64), (1.90, 0.50, 8.60)],\n            [(0.74, 0.40, 7.12), (1.20, 0.80, 7.08), (1.72, 0.42, 7.12)],\n        ],\n        thickness=0.075,\n        col_creases={1: 0.82},\n        outward=(0, 1, 0),\n    )"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/kit/carbon_mech.py starting at line 679 (+25/-12 lines).
  • edit_file{"Path":"~/work/sortie/src/view/clip.ts","Replacement":" centre.set(0, footY + height * 0.40, 0);\n if (camera.fov !== 44) { camera.fov = 44; camera.updateProjectionMatrix(); }\n yawQ.setFromAxisAngle(up, THREE.MathUtils.degToRad(v.camYaw));\n offset.set(0, 3.8 * size, -27.2 * size).applyQuaternion(yawQ);\n camera.position.copy(centre).add(offset);\n look_.set(0, -0.4 * size, 220).applyQuaternion(yawQ).add(centre);\n camera.up.copy(up);\n camera.lookAt(look_);\n } else {\n setOutdoor(1, 0);\n const viewYawDeg = 14;\n const viewYaw = THREE.MathUtils.degToRad(viewYawDeg);\n const pitch = THREE.MathUtils.degToRad(v.pitch);\n const sep = 4.95 * size;\n const rx = Math.cos(viewYaw), rz = -Math.sin(viewYaw);\n // Camera sits on sunlit +Z side looking -Z, so -camRight is screen-left (primary) and +camRight is screen-right (yardstick)\n root.position.set(-rx * sep, 0, -rz * sep);\n root2.position.set(rx * sep, 0, rz * sep);\n const spin = THREE.MathUtils.degToRad(viewYawDeg + v.camYaw);\n root.rotation.set(0, spin, 0);\n root2.rotation.set(0, spin, 0);\n root.updateMatrixWorld(true);\n root2.updateMatrixWorld(true);\n centre.set(0, footY + height * v.lookAt, 0);\n if (camera.fov !== 35) { camera.fov = 35; camera.updateProjectionMatrix(); }\n camera.position.set(Math.sin(viewYaw) * Math.cos(pitch), Math.sin(pitch), Math.cos(viewYaw) * Math.cos(pitch))\n .multiplyScalar(2.08 * height).add(centre);","Target":" centre.set(0, footY + height * 0.43, 0);\n if (camera.fov !== 44) { camera.fov = 44; camera.updateProjectionMatrix(); }\n yawQ.setFromAxisAngle(up, THREE.MathUtils.degToRad(v.camYaw));\n offset.set(0, 4.1 * size, -24.8 * size).applyQuaternion(yawQ);\n camera.position.copy(centre).add(offset);\n look_.set(0, -0.5 * size, 220).applyQuaternion(yawQ).add(centre);\n camera.up.copy(up);\n camera.lookAt(look_);\n } else {\n setOutdoor(1, 0);\n const viewYawDeg = 14;\n const viewYaw = THREE.MathUtils.degToRad(viewYawDeg);\n const pitch = THREE.MathUtils.degToRad(v.pitch);\n const sep = 5.35 * size;\n const rx = Math.cos(viewYaw), rz = -Math.sin(viewYaw);\n // Camera sits on sunlit +Z side looking -Z, so -camRight is screen-left (primary) and +camRight is screen-right (yardstick)\n root.position.set(-rx * sep, 0, -rz * sep);\n root2.position.set(rx * sep, 0, rz * sep);\n const spin = THREE.MathUtils.degToRad(viewYawDeg + v.camYaw);\n root.rotation.set(0, spin, 0);\n root2.rotation.set(0, spin, 0);\n root.updateMatrixWorld(true);\n root2.updateMatrixWorld(true);\n centre.set(0, footY + height * v.lookAt, 0);\n if (camera.fov !== 35) { camera.fov = 35; camera.updateProjectionMatrix(); }\n camera.position.set(Math.sin(viewYaw) * Math.cos(pitch), Math.sin(pitch), Math.cos(viewYaw) * Math.cos(pitch))\n .multiplyScalar(2.24 * height).add(centre);"}

    input

    {
      "Path": "~/work/sortie/src/view/clip.ts",
      "Replacement": "        centre.set(0, footY + height * 0.40, 0);\n        if (camera.fov !== 44) { camera.fov = 44; camera.updateProjectionMatrix(); }\n        yawQ.setFromAxisAngle(up, THREE.MathUtils.degToRad(v.camYaw));\n        offset.set(0, 3.8 * size, -27.2 * size).applyQuaternion(yawQ);\n        camera.position.copy(centre).add(offset);\n        look_.set(0, -0.4 * size, 220).applyQuaternion(yawQ).add(centre);\n        camera.up.copy(up);\n        camera.lookAt(look_);\n      } else {\n        setOutdoor(1, 0);\n        const viewYawDeg = 14;\n        const viewYaw = THREE.MathUtils.degToRad(viewYawDeg);\n        const pitch = THREE.MathUtils.degToRad(v.pitch);\n        const sep = 4.95 * size;\n        const rx = Math.cos(viewYaw), rz = -Math.sin(viewYaw);\n        // Camera sits on sunlit +Z side looking -Z, so -camRight is screen-left (primary) and +camRight is screen-right (yardstick)\n        root.position.set(-rx * sep, 0, -rz * sep);\n        root2.position.set(rx * sep, 0, rz * sep);\n        const spin = THREE.MathUtils.degToRad(viewYawDeg + v.camYaw);\n        root.rotation.set(0, spin, 0);\n        root2.rotation.set(0, spin, 0);\n        root.updateMatrixWorld(true);\n        root2.updateMatrixWorld(true);\n        centre.set(0, footY + height * v.lookAt, 0);\n        if (camera.fov !== 35) { camera.fov = 35; camera.updateProjectionMatrix(); }\n        camera.position.set(Math.sin(viewYaw) * Math.cos(pitch), Math.sin(pitch), Math.cos(viewYaw) * Math.cos(pitch))\n          .multiplyScalar(2.08 * height).add(centre);",
      "Target": "        centre.set(0, footY + height * 0.43, 0);\n        if (camera.fov !== 44) { camera.fov = 44; camera.updateProjectionMatrix(); }\n        yawQ.setFromAxisAngle(up, THREE.MathUtils.degToRad(v.camYaw));\n        offset.set(0, 4.1 * size, -24.8 * size).applyQuaternion(yawQ);\n        camera.position.copy(centre).add(offset);\n        look_.set(0, -0.5 * size, 220).applyQuaternion(yawQ).add(centre);\n        camera.up.copy(up);\n        camera.lookAt(look_);\n      } else {\n        setOutdoor(1, 0);\n        const viewYawDeg = 14;\n        const viewYaw = THREE.MathUtils.degToRad(viewYawDeg);\n        const pitch = THREE.MathUtils.degToRad(v.pitch);\n        const sep = 5.35 * size;\n        const rx = Math.cos(viewYaw), rz = -Math.sin(viewYaw);\n        // Camera sits on sunlit +Z side looking -Z, so -camRight is screen-left (primary) and +camRight is screen-right (yardstick)\n        root.position.set(-rx * sep, 0, -rz * sep);\n        root2.position.set(rx * sep, 0, rz * sep);\n        const spin = THREE.MathUtils.degToRad(viewYawDeg + v.camYaw);\n        root.rotation.set(0, spin, 0);\n        root2.rotation.set(0, spin, 0);\n        root.updateMatrixWorld(true);\n        root2.updateMatrixWorld(true);\n        centre.set(0, footY + height * v.lookAt, 0);\n        if (camera.fov !== 35) { camera.fov = 35; camera.updateProjectionMatrix(); }\n        camera.position.set(Math.sin(viewYaw) * Math.cos(pitch), Math.sin(pitch), Math.cos(viewYaw) * Math.cos(pitch))\n          .multiplyScalar(2.24 * height).add(centre);"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/src/view/clip.ts starting at line 267 (+6/-6 lines).
reasoning

Updating the lower shin greave and grounded raptor foot width in the specified file. Also, reviewing a separate file focusing on decals to ensure proper placement of a specific decal on the front-outer shin greave.

  • edit_file{"Path":"~/work/sortie/kit/carbon_mech.py","Replacement":" # Razor-keeled aerodynamic front & outer flared shin prow tapering to athletic ankle\n shin_prow = patch_shell(\n [\n [(0.58, -0.18, 5.56), (1.20, -1.12, 5.58), (2.02, -0.22, 5.52), (2.12, 0.36, 5.46)],\n [(0.50, -0.22, 4.22), (1.20, -1.18, 4.24), (2.22, -0.26, 4.18), (2.30, 0.48, 4.14)],\n [(0.56, -0.18, 2.86), (1.20, -1.04, 2.84), (2.04, -0.20, 2.86), (2.10, 0.38, 2.84)],\n [(0.66, -0.12, 1.92), (1.20, -0.86, 1.90), (1.84, -0.14, 1.92), (1.88, 0.28, 1.92)],\n ],\n thickness=0.084,\n col_creases={1: 0.94, 2: 0.78},\n outward=(0.30, -1.0, 0.0),\n )\n sp_lo, sp_hi = halves(shin_prow, (1.2, -0.7, 3.62), (0.22, -0.12, 1.0), gap=0.034)\n put_pair(\"shin_prow_hi\", sp_hi, \"main\", SL, SR, bevel=0.014)\n sp_ank, sp_mid = halves(sp_lo, (1.2, -0.6, 2.34), (-0.15, 0.1, 1.0), gap=0.028)\n put_pair(\"shin_prow_lo\", sp_mid, \"main\", SL, SR, bevel=0.014)\n put_pair(\"shin_ankle_cuff\", sp_ank, \"accent\", SL, SR, bevel=0.012)\n\n # Inner medial shin greave plate closing lower leg cleanly\n shin_in = patch_shell(\n [\n [(0.60, -0.14, 5.42), (0.50, 0.16, 5.40), (0.66, 0.36, 5.38)],\n [(0.54, -0.18, 4.18), (0.44, 0.18, 4.18), (0.62, 0.42, 4.16)],\n [(0.60, -0.16, 2.84), (0.50, 0.16, 2.84), (0.68, 0.38, 2.82)],\n [(0.68, -0.10, 1.94), (0.60, 0.14, 1.94), (0.76, 0.30, 1.94)],\n ],\n thickness=0.068,\n col_creases={1: 0.78},\n outward=(-1.0, 0.0, 0.0),\n )\n put_pair(\"shin_in_plate\", shin_in, \"main\", SL, SR, bevel=0.012)","Target":" # Razor-keeled aerodynamic front & outer flared shin prow tapering to athletic ankle\n shin_prow = patch_shell(\n [\n [(0.64, -0.18, 5.56), (1.20, -1.10, 5.58), (1.96, -0.22, 5.52), (2.06, 0.36, 5.46)],\n [(0.56, -0.22, 4.22), (1.20, -1.16, 4.24), (2.16, -0.26, 4.18), (2.24, 0.48, 4.14)],\n [(0.68, -0.18, 2.86), (1.20, -0.98, 2.84), (1.92, -0.20, 2.86), (1.98, 0.38, 2.84)],\n [(0.80, -0.12, 1.92), (1.20, -0.78, 1.90), (1.64, -0.14, 1.92), (1.68, 0.28, 1.92)],\n ],\n thickness=0.082,\n col_creases={1: 0.94, 2: 0.78},\n outward=(0.30, -1.0, 0.0),\n )\n sp_lo, sp_hi = halves(shin_prow, (1.2, -0.7, 3.62), (0.22, -0.12, 1.0), gap=0.034)\n put_pair(\"shin_prow_hi\", sp_hi, \"main\", SL, SR, bevel=0.014)\n sp_ank, sp_mid = halves(sp_lo, (1.2, -0.6, 2.34), (-0.15, 0.1, 1.0), gap=0.028)\n put_pair(\"shin_prow_lo\", sp_mid, \"main\", SL, SR, bevel=0.014)\n put_pair(\"shin_ankle_cuff\", sp_ank, \"accent\", SL, SR, bevel=0.012)"}

    input

    {
      "Path": "~/work/sortie/kit/carbon_mech.py",
      "Replacement": "    # Razor-keeled aerodynamic front & outer flared shin prow tapering to athletic ankle\n    shin_prow = patch_shell(\n        [\n            [(0.58, -0.18, 5.56), (1.20, -1.12, 5.58), (2.02, -0.22, 5.52), (2.12, 0.36, 5.46)],\n            [(0.50, -0.22, 4.22), (1.20, -1.18, 4.24), (2.22, -0.26, 4.18), (2.30, 0.48, 4.14)],\n            [(0.56, -0.18, 2.86), (1.20, -1.04, 2.84), (2.04, -0.20, 2.86), (2.10, 0.38, 2.84)],\n            [(0.66, -0.12, 1.92), (1.20, -0.86, 1.90), (1.84, -0.14, 1.92), (1.88, 0.28, 1.92)],\n        ],\n        thickness=0.084,\n        col_creases={1: 0.94, 2: 0.78},\n        outward=(0.30, -1.0, 0.0),\n    )\n    sp_lo, sp_hi = halves(shin_prow, (1.2, -0.7, 3.62), (0.22, -0.12, 1.0), gap=0.034)\n    put_pair(\"shin_prow_hi\", sp_hi, \"main\", SL, SR, bevel=0.014)\n    sp_ank, sp_mid = halves(sp_lo, (1.2, -0.6, 2.34), (-0.15, 0.1, 1.0), gap=0.028)\n    put_pair(\"shin_prow_lo\", sp_mid, \"main\", SL, SR, bevel=0.014)\n    put_pair(\"shin_ankle_cuff\", sp_ank, \"accent\", SL, SR, bevel=0.012)\n\n    # Inner medial shin greave plate closing lower leg cleanly\n    shin_in = patch_shell(\n        [\n            [(0.60, -0.14, 5.42), (0.50, 0.16, 5.40), (0.66, 0.36, 5.38)],\n            [(0.54, -0.18, 4.18), (0.44, 0.18, 4.18), (0.62, 0.42, 4.16)],\n            [(0.60, -0.16, 2.84), (0.50, 0.16, 2.84), (0.68, 0.38, 2.82)],\n            [(0.68, -0.10, 1.94), (0.60, 0.14, 1.94), (0.76, 0.30, 1.94)],\n        ],\n        thickness=0.068,\n        col_creases={1: 0.78},\n        outward=(-1.0, 0.0, 0.0),\n    )\n    put_pair(\"shin_in_plate\", shin_in, \"main\", SL, SR, bevel=0.012)",
      "Target": "    # Razor-keeled aerodynamic front & outer flared shin prow tapering to athletic ankle\n    shin_prow = patch_shell(\n        [\n            [(0.64, -0.18, 5.56), (1.20, -1.10, 5.58), (1.96, -0.22, 5.52), (2.06, 0.36, 5.46)],\n            [(0.56, -0.22, 4.22), (1.20, -1.16, 4.24), (2.16, -0.26, 4.18), (2.24, 0.48, 4.14)],\n            [(0.68, -0.18, 2.86), (1.20, -0.98, 2.84), (1.92, -0.20, 2.86), (1.98, 0.38, 2.84)],\n            [(0.80, -0.12, 1.92), (1.20, -0.78, 1.90), (1.64, -0.14, 1.92), (1.68, 0.28, 1.92)],\n        ],\n        thickness=0.082,\n        col_creases={1: 0.94, 2: 0.78},\n        outward=(0.30, -1.0, 0.0),\n    )\n    sp_lo, sp_hi = halves(shin_prow, (1.2, -0.7, 3.62), (0.22, -0.12, 1.0), gap=0.034)\n    put_pair(\"shin_prow_hi\", sp_hi, \"main\", SL, SR, bevel=0.014)\n    sp_ank, sp_mid = halves(sp_lo, (1.2, -0.6, 2.34), (-0.15, 0.1, 1.0), gap=0.028)\n    put_pair(\"shin_prow_lo\", sp_mid, \"main\", SL, SR, bevel=0.014)\n    put_pair(\"shin_ankle_cuff\", sp_ank, \"accent\", SL, SR, bevel=0.012)"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/kit/carbon_mech.py starting at line 771 (+20/-6 lines).
  • edit_file{"Path":"~/work/sortie/kit/carbon_mech.py","Replacement":" # Floating sculpted ankle guard spat\n spat = patch_shell(\n [\n [(0.64, -0.38, 2.16), (1.20, -0.98, 2.24), (1.78, -0.38, 2.16)],\n [(0.54, -0.46, 1.22), (1.20, -1.16, 1.18), (1.88, -0.46, 1.22)],\n ],\n thickness=0.072,\n col_creases={1: 0.90},\n outward=(0, -1, 0.2),\n )\n sp_b, sp_t = halves(spat, (1.2, -0.8, 1.92), (0, -0.2, 1.0), gap=0.024)\n put_pair(\"ankle_spat_main\", sp_b, \"main\", FL, FR, bevel=0.012)\n put_pair(\"ankle_spat_trim\", sp_t, \"trim\", FL, FR, bevel=0.008)\n\n # Arched mechanical foot bridge + split twin-talon front sabot + swept heel stabilizer spur\n bridge = aero_loft([\n [(x + 1.22, y - 0.10, 0.28) for x, y in octo(1.26, 1.82, 0.24)],\n [(x + 1.21, y - 0.02, 1.08) for x, y in octo(1.04, 1.34, 0.20)],\n ], samples_per_span=2)\n put_pair(\"foot_bridge\", bridge, \"frame\", FL, FR, bevel=0.014)\n\n # Upper vamp shell over instep\n vamp = patch_shell(\n [\n [(0.54, -0.42, 1.08), (1.22, -0.94, 1.16), (1.90, -0.42, 1.08)],\n [(0.48, -1.38, 0.68), (1.22, -1.80, 0.72), (1.96, -1.38, 0.68)],\n ],\n thickness=0.075,\n col_creases={1: 0.88},\n outward=(0, -0.6, 1.0),\n )\n put_pair(\"foot_vamp\", vamp, \"main\", FL, FR, bevel=0.012)\n\n # Cloven twin-talon forward claws (inner and outer aerodynamic toes)\n for tag, tx, sx_toe in ((\"in\", 0.82, -0.14), (\"out\", 1.60, 0.16)):\n talon = aero_loft([\n [(tx - 0.26, -1.16, 0.14), (tx + 0.26, -1.16, 0.14), (tx + 0.22, -1.12, 0.76), (tx - 0.22, -1.12, 0.76)],\n [(tx + sx_toe - 0.23, -1.86, 0.12), (tx + sx_toe + 0.23, -1.86, 0.12), (tx + sx_toe + 0.18, -1.82, 0.56), (tx + sx_toe - 0.18, -1.82, 0.56)],\n [(tx + sx_toe * 1.3 - 0.15, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.15, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.11, -2.34, 0.32), (tx + sx_toe * 1.3 - 0.11, -2.34, 0.32)],\n ], samples_per_span=2)\n t_tip, t_base = halves(talon, (tx, -2.02, 0.3), (0, 1.0, 0.15), gap=0.022)\n put_pair(f\"foot_talon_{tag}\", t_base, \"accent\", FL, FR, bevel=0.012)\n put_pair(f\"foot_claw_{tag}\", t_tip, \"trim\", FL, FR, bevel=0.008)\n\n sole = prism([\n (tx - 0.24, -1.12), (tx + 0.24, -1.12),\n (tx + sx_toe * 1.2 + 0.16, -2.36), (tx + sx_toe * 1.2 - 0.16, -2.36),\n ], 0.0, 0.13, \"xy\")\n put_pair(f\"sole_front_{tag}\", sole, \"joint\", FL, FR, bevel=0.008, smooth=False)\n\n # Rear heel stabilizer spur + grounded sole pad\n heel = aero_loft([\n [(0.62, 0.62, 0.14), (1.82, 0.62, 0.14), (1.72, 0.58, 0.98), (0.72, 0.58, 0.98)],\n [(0.68, 1.32, 0.14), (1.76, 1.32, 0.14), (1.64, 1.24, 0.72), (0.80, 1.24, 0.72)],\n [(0.84, 1.76, 0.16), (1.60, 1.76, 0.16), (1.50, 1.66, 0.44), (0.94, 1.66, 0.44)],\n ], samples_per_span=2)","Target":" # Floating sculpted ankle guard spat\n spat = patch_shell(\n [\n [(0.72, -0.38, 2.16), (1.20, -0.98, 2.24), (1.68, -0.38, 2.16)],\n [(0.64, -0.46, 1.22), (1.20, -1.16, 1.18), (1.76, -0.46, 1.22)],\n ],\n thickness=0.072,\n col_creases={1: 0.90},\n outward=(0, -1, 0.2),\n )\n sp_b, sp_t = halves(spat, (1.2, -0.8, 1.92), (0, -0.2, 1.0), gap=0.024)\n put_pair(\"ankle_spat_main\", sp_b, \"main\", FL, FR, bevel=0.012)\n put_pair(\"ankle_spat_trim\", sp_t, \"trim\", FL, FR, bevel=0.008)\n\n # Arched mechanical foot bridge + split twin-talon front sabot + swept heel stabilizer spur\n bridge = aero_loft([\n [(x + 1.20, y - 0.10, 0.28) for x, y in octo(1.06, 1.82, 0.24)],\n [(x + 1.20, y - 0.02, 1.08) for x, y in octo(0.88, 1.34, 0.20)],\n ], samples_per_span=2)\n put_pair(\"foot_bridge\", bridge, \"frame\", FL, FR, bevel=0.014)\n\n # Upper vamp shell over instep\n vamp = patch_shell(\n [\n [(0.62, -0.42, 1.08), (1.20, -0.92, 1.16), (1.78, -0.42, 1.08)],\n [(0.58, -1.38, 0.68), (1.20, -1.78, 0.72), (1.82, -1.38, 0.68)],\n ],\n thickness=0.075,\n col_creases={1: 0.88},\n outward=(0, -0.6, 1.0),\n )\n put_pair(\"foot_vamp\", vamp, \"main\", FL, FR, bevel=0.012)\n\n # Cloven twin-talon forward claws (inner and outer aerodynamic toes)\n for tag, tx, sx_toe in ((\"in\", 0.90, -0.08), (\"out\", 1.50, 0.08)):\n talon = aero_loft([\n [(tx - 0.24, -1.16, 0.14), (tx + 0.24, -1.16, 0.14), (tx + 0.20, -1.12, 0.76), (tx - 0.20, -1.12, 0.76)],\n [(tx + sx_toe - 0.21, -1.86, 0.12), (tx + sx_toe + 0.21, -1.86, 0.12), (tx + sx_toe + 0.16, -1.82, 0.56), (tx + sx_toe - 0.16, -1.82, 0.56)],\n [(tx + sx_toe * 1.3 - 0.13, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.13, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.09, -2.34, 0.32), (tx + sx_toe * 1.3 - 0.09, -2.34, 0.32)],\n ], samples_per_span=2)\n t_tip, t_base = halves(talon, (tx, -2.02, 0.3), (0, 1.0, 0.15), gap=0.022)\n put_pair(f\"foot_talon_{tag}\", t_base, \"accent\", FL, FR, bevel=0.012)\n put_pair(f\"foot_claw_{tag}\", t_tip, \"trim\", FL, FR, bevel=0.008)\n\n sole = prism([\n (tx - 0.22, -1.12), (tx + 0.22, -1.12),\n (tx + sx_toe * 1.2 + 0.14, -2.36), (tx + sx_toe * 1.2 - 0.14, -2.36),\n ], 0.0, 0.13, \"xy\")\n put_pair(f\"sole_front_{tag}\", sole, \"joint\", FL, FR, bevel=0.008, smooth=False)\n\n # Rear heel stabilizer spur + grounded sole pad\n heel = aero_loft([\n [(0.72, 0.62, 0.14), (1.68, 0.62, 0.14), (1.60, 0.58, 0.98), (0.80, 0.58, 0.98)],\n [(0.78, 1.32, 0.14), (1.62, 1.32, 0.14), (1.52, 1.24, 0.72), (0.88, 1.24, 0.72)],\n [(0.92, 1.76, 0.16), (1.48, 1.76, 0.16), (1.40, 1.66, 0.44), (1.00, 1.66, 0.44)],\n ], samples_per_span=2)"}

    input

    {
      "Path": "~/work/sortie/kit/carbon_mech.py",
      "Replacement": "    # Floating sculpted ankle guard spat\n    spat = patch_shell(\n        [\n            [(0.64, -0.38, 2.16), (1.20, -0.98, 2.24), (1.78, -0.38, 2.16)],\n            [(0.54, -0.46, 1.22), (1.20, -1.16, 1.18), (1.88, -0.46, 1.22)],\n        ],\n        thickness=0.072,\n        col_creases={1: 0.90},\n        outward=(0, -1, 0.2),\n    )\n    sp_b, sp_t = halves(spat, (1.2, -0.8, 1.92), (0, -0.2, 1.0), gap=0.024)\n    put_pair(\"ankle_spat_main\", sp_b, \"main\", FL, FR, bevel=0.012)\n    put_pair(\"ankle_spat_trim\", sp_t, \"trim\", FL, FR, bevel=0.008)\n\n    # Arched mechanical foot bridge + split twin-talon front sabot + swept heel stabilizer spur\n    bridge = aero_loft([\n        [(x + 1.22, y - 0.10, 0.28) for x, y in octo(1.26, 1.82, 0.24)],\n        [(x + 1.21, y - 0.02, 1.08) for x, y in octo(1.04, 1.34, 0.20)],\n    ], samples_per_span=2)\n    put_pair(\"foot_bridge\", bridge, \"frame\", FL, FR, bevel=0.014)\n\n    # Upper vamp shell over instep\n    vamp = patch_shell(\n        [\n            [(0.54, -0.42, 1.08), (1.22, -0.94, 1.16), (1.90, -0.42, 1.08)],\n            [(0.48, -1.38, 0.68), (1.22, -1.80, 0.72), (1.96, -1.38, 0.68)],\n        ],\n        thickness=0.075,\n        col_creases={1: 0.88},\n        outward=(0, -0.6, 1.0),\n    )\n    put_pair(\"foot_vamp\", vamp, \"main\", FL, FR, bevel=0.012)\n\n    # Cloven twin-talon forward claws (inner and outer aerodynamic toes)\n    for tag, tx, sx_toe in ((\"in\", 0.82, -0.14), (\"out\", 1.60, 0.16)):\n        talon = aero_loft([\n            [(tx - 0.26, -1.16, 0.14), (tx + 0.26, -1.16, 0.14), (tx + 0.22, -1.12, 0.76), (tx - 0.22, -1.12, 0.76)],\n            [(tx + sx_toe - 0.23, -1.86, 0.12), (tx + sx_toe + 0.23, -1.86, 0.12), (tx + sx_toe + 0.18, -1.82, 0.56), (tx + sx_toe - 0.18, -1.82, 0.56)],\n            [(tx + sx_toe * 1.3 - 0.15, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.15, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.11, -2.34, 0.32), (tx + sx_toe * 1.3 - 0.11, -2.34, 0.32)],\n        ], samples_per_span=2)\n        t_tip, t_base = halves(talon, (tx, -2.02, 0.3), (0, 1.0, 0.15), gap=0.022)\n        put_pair(f\"foot_talon_{tag}\", t_base, \"accent\", FL, FR, bevel=0.012)\n        put_pair(f\"foot_claw_{tag}\", t_tip, \"trim\", FL, FR, bevel=0.008)\n\n        sole = prism([\n            (tx - 0.24, -1.12), (tx + 0.24, -1.12),\n            (tx + sx_toe * 1.2 + 0.16, -2.36), (tx + sx_toe * 1.2 - 0.16, -2.36),\n        ], 0.0, 0.13, \"xy\")\n        put_pair(f\"sole_front_{tag}\", sole, \"joint\", FL, FR, bevel=0.008, smooth=False)\n\n    # Rear heel stabilizer spur + grounded sole pad\n    heel = aero_loft([\n        [(0.62, 0.62, 0.14), (1.82, 0.62, 0.14), (1.72, 0.58, 0.98), (0.72, 0.58, 0.98)],\n        [(0.68, 1.32, 0.14), (1.76, 1.32, 0.14), (1.64, 1.24, 0.72), (0.80, 1.24, 0.72)],\n        [(0.84, 1.76, 0.16), (1.60, 1.76, 0.16), (1.50, 1.66, 0.44), (0.94, 1.66, 0.44)],\n    ], samples_per_span=2)",
      "Target": "    # Floating sculpted ankle guard spat\n    spat = patch_shell(\n        [\n            [(0.72, -0.38, 2.16), (1.20, -0.98, 2.24), (1.68, -0.38, 2.16)],\n            [(0.64, -0.46, 1.22), (1.20, -1.16, 1.18), (1.76, -0.46, 1.22)],\n        ],\n        thickness=0.072,\n        col_creases={1: 0.90},\n        outward=(0, -1, 0.2),\n    )\n    sp_b, sp_t = halves(spat, (1.2, -0.8, 1.92), (0, -0.2, 1.0), gap=0.024)\n    put_pair(\"ankle_spat_main\", sp_b, \"main\", FL, FR, bevel=0.012)\n    put_pair(\"ankle_spat_trim\", sp_t, \"trim\", FL, FR, bevel=0.008)\n\n    # Arched mechanical foot bridge + split twin-talon front sabot + swept heel stabilizer spur\n    bridge = aero_loft([\n        [(x + 1.20, y - 0.10, 0.28) for x, y in octo(1.06, 1.82, 0.24)],\n        [(x + 1.20, y - 0.02, 1.08) for x, y in octo(0.88, 1.34, 0.20)],\n    ], samples_per_span=2)\n    put_pair(\"foot_bridge\", bridge, \"frame\", FL, FR, bevel=0.014)\n\n    # Upper vamp shell over instep\n    vamp = patch_shell(\n        [\n            [(0.62, -0.42, 1.08), (1.20, -0.92, 1.16), (1.78, -0.42, 1.08)],\n            [(0.58, -1.38, 0.68), (1.20, -1.78, 0.72), (1.82, -1.38, 0.68)],\n        ],\n        thickness=0.075,\n        col_creases={1: 0.88},\n        outward=(0, -0.6, 1.0),\n    )\n    put_pair(\"foot_vamp\", vamp, \"main\", FL, FR, bevel=0.012)\n\n    # Cloven twin-talon forward claws (inner and outer aerodynamic toes)\n    for tag, tx, sx_toe in ((\"in\", 0.90, -0.08), (\"out\", 1.50, 0.08)):\n        talon = aero_loft([\n            [(tx - 0.24, -1.16, 0.14), (tx + 0.24, -1.16, 0.14), (tx + 0.20, -1.12, 0.76), (tx - 0.20, -1.12, 0.76)],\n            [(tx + sx_toe - 0.21, -1.86, 0.12), (tx + sx_toe + 0.21, -1.86, 0.12), (tx + sx_toe + 0.16, -1.82, 0.56), (tx + sx_toe - 0.16, -1.82, 0.56)],\n            [(tx + sx_toe * 1.3 - 0.13, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.13, -2.42, 0.12), (tx + sx_toe * 1.3 + 0.09, -2.34, 0.32), (tx + sx_toe * 1.3 - 0.09, -2.34, 0.32)],\n        ], samples_per_span=2)\n        t_tip, t_base = halves(talon, (tx, -2.02, 0.3), (0, 1.0, 0.15), gap=0.022)\n        put_pair(f\"foot_talon_{tag}\", t_base, \"accent\", FL, FR, bevel=0.012)\n        put_pair(f\"foot_claw_{tag}\", t_tip, \"trim\", FL, FR, bevel=0.008)\n\n        sole = prism([\n            (tx - 0.22, -1.12), (tx + 0.22, -1.12),\n            (tx + sx_toe * 1.2 + 0.14, -2.36), (tx + sx_toe * 1.2 - 0.14, -2.36),\n        ], 0.0, 0.13, \"xy\")\n        put_pair(f\"sole_front_{tag}\", sole, \"joint\", FL, FR, bevel=0.008, smooth=False)\n\n    # Rear heel stabilizer spur + grounded sole pad\n    heel = aero_loft([\n        [(0.72, 0.62, 0.14), (1.68, 0.62, 0.14), (1.60, 0.58, 0.98), (0.80, 0.58, 0.98)],\n        [(0.78, 1.32, 0.14), (1.62, 1.32, 0.14), (1.52, 1.24, 0.72), (0.88, 1.24, 0.72)],\n        [(0.92, 1.76, 0.16), (1.48, 1.76, 0.16), (1.40, 1.66, 0.44), (1.00, 1.66, 0.44)],\n    ], samples_per_span=2)"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/kit/carbon_mech.py starting at line 831 (+15/-15 lines).
  • read_file{"EndLine":165,"Path":"~/work/sortie/src/render/decals.ts","StartLine":120}

    input

    {
      "EndLine": 165,
      "Path": "~/work/sortie/src/render/decals.ts",
      "StartLine": 120
    }

    result, 47 lines

    Showing lines 120-165 of 166
    120:     decal.userData.decal = true;
    121:     decal.receiveShadow = true;
    122:     mesh.add(decal);
    123:   }
    124: }
    125: 
    126: /** The striker's markings: unit number on the shoulders and leg, designation, stencils, hazard bands. */
    127: export const STRIKER_DECALS: DecalSpec[] = [
    128:   { kind: 'number', text: '07', at: [4.8, 15.15, 0], dir: [-1, 0, 0], size: [0.95, 0.7], color: '#e9edf0' },
    129:   { kind: 'emblem', at: [-4.8, 15.15, 0], dir: [1, 0, 0], size: [0.8, 0.8], color: '#e9edf0' },
    130:   { kind: 'number', text: '07', at: [2.6, 3.6, 0.15], dir: [-1, 0, 0], size: [0.55, 0.42], color: '#e9edf0' },
    131:   { kind: 'stencil', text: 'MF-07', at: [1.15, 9.25, 3], dir: [0, 0, -1], size: [0.7, 0.2] },
    132:   { kind: 'stencil', text: 'NO STEP', at: [1.3, 10.05, 3], dir: [0, 0, -1], size: [0.6, 0.15], roll: -20 },
    133:   { kind: 'stencil', text: 'NO STEP', at: [-1.3, 10.05, 3], dir: [0, 0, -1], size: [0.6, 0.15], roll: 20 },
    134:   { kind: 'hazard', at: [1.2, 6.55, 3], dir: [0, 0, -1], size: [0.6, 0.12] },
    135:   { kind: 'hazard', at: [-1.2, 6.55, 3], dir: [0, 0, -1], size: [0.6, 0.12] },
    136:   { kind: 'stencil', text: 'DANGER EXHAUST', at: [0, 12.9, -4], dir: [0, 0, 1], size: [1.1, 0.16] },
    137:   { kind: 'stencil', text: 'STRIKER', at: [-2.6, 3.4, 0.15], dir: [1, 0, 0], size: [0.9, 0.2], roll: 90, color: '#e9edf0' },
    138: ];
    139: 
    140: /** Markings for carbon_0 (Kestrel, CX-00): unit numbers, designation stencils, intake/exhaust warnings and hazard bands. */
    141: export const CARBON_DECALS: DecalSpec[] = [
    142:   { kind: 'number', text: '00', at: [5.0, 14.95, -0.05], dir: [-1, 0, 0], size: [0.88, 0.64], color: '#e9edf0' },
    143:   { kind: 'emblem', at: [-5.0, 14.95, -0.05], dir: [1, 0, 0], size: [0.76, 0.76], color: '#e9edf0' },
    144:   { kind: 'stencil', text: 'CX-00', at: [1.18, 14.05, 3], dir: [-0.15, 0, -1], size: [0.64, 0.18] },
    145:   { kind: 'stencil', text: 'NO STEP', at: [1.22, 10.48, 3], dir: [0, 0, -1], size: [0.54, 0.13], roll: -14 },
    146:   { kind: 'stencil', text: 'NO STEP', at: [-1.22, 10.48, 3], dir: [0, 0, -1], size: [0.54, 0.13], roll: 14 },
    147:   { kind: 'hazard', at: [1.2, 8.55, 3], dir: [0, 0, -1], size: [0.58, 0.11] },
    148:   { kind: 'hazard', at: [-1.2, 8.55, 3], dir: [0, 0, -1], size: [0.58, 0.11] },
    149:   { kind: 'number', text: '00', at: [2.8, 4.75, -0.68], dir: [-0.9, 0, 0.42], size: [0.52, 0.38] },
    150:   { kind: 'stencil', text: 'KESTREL', at: [-2.8, 3.62, -0.58], dir: [0.9, 0, 0.42], size: [0.82, 0.17], roll: 90, color: '#e9edf0' },
    151:   { kind: 'stencil', text: 'VECTOR EXHAUST', at: [0, 13.05, -4], dir: [0, 0, 1], size: [0.96, 0.14] },
    152: ];
    153: 
    154: /** An emblem at every bearing anchor (bearing.*) of a model, using the anchor's direction and size. */
    155: export function bearingDecals(root: THREE.Object3D, color: string): DecalSpec[] {
    156:   root.updateMatrixWorld(true);
    157:   const out: DecalSpec[] = [];
    158:   root.traverse((o) => {
    159:     if (!o.name.startsWith('bearing') || !o.visible) return;
    160:     const at = root.worldToLocal(o.getWorldPosition(new THREE.Vector3()));
    161:     const dir = o.userData.dir as [number, number, number] | undefined;
    162:     const size = Number(o.userData.size ?? 0.5);
    163:     if (dir) out.push({ kind: 'emblem', at: [at.x, at.y, at.z], dir, size: [size, size], color });
    164:   });
    165:   return out;
reasoning

The decal's z-coordinate, currently -0.68, appears misplaced based on the expected glTF coordinate system where positive Z is forward. This suggests an incorrect placement on the model's back calf instead of the front outer shin. Updating the z-coordinate to the expected forward position should fix the decal's positioning.

  • edit_file{"Path":"~/work/sortie/src/render/decals.ts","Replacement":" { kind: 'number', text: '00', at: [2.8, 4.35, 0.38], dir: [-0.92, 0, -0.38], size: [0.52, 0.38] },","Target":" { kind: 'number', text: '00', at: [2.8, 4.75, -0.68], dir: [-0.9, 0, 0.42], size: [0.52, 0.38] },"}

    input

    {
      "Path": "~/work/sortie/src/render/decals.ts",
      "Replacement": "  { kind: 'number', text: '00', at: [2.8, 4.35, 0.38], dir: [-0.92, 0, -0.38], size: [0.52, 0.38] },",
      "Target": "  { kind: 'number', text: '00', at: [2.8, 4.75, -0.68], dir: [-0.9, 0, 0.42], size: [0.52, 0.38] },"
    }

    result, 1 line

    Made 1 replacement in ~/work/sortie/src/render/decals.ts starting at line 149 (+1/-1 lines).