A mech game prototype, pushed by Gemini 4 Carbon
agent
+13:47reasoning
Observing the POSES.stand definition, the values assigned to forearm.L and forearm.R appear identical. This might indicate an error or an unintentional repetition in the pose data. Further investigation is needed to determine if this is intended. The current assumption is a potential discrepancy within the data structure.
The goal is to refine the pose for a more natural, grounded stance, specifically a subtle weight-shifted guard posture with adjusted leg, chin, and arm angles to enhance the visual impression. A change will be made to export bearingDecals from a single source, enabling consistent emblem rendering across different viewers and models, and ensure all changes on the carbon branch adhere to strict style guidelines.
The initial focus is on kit/lib.py. Specifically, updating the solid(...) function to set o["weighted_normal"] under specific conditions and using a different angle in set_sharp_from_angle. In export(...), WEIGHTED_NORMAL and bake(o) need to be applied to mesh objects conditionally, and the temporary custom property o["weighted_normal"] should be deleted prior to the export. It appears that the atelier_board functionality is already built out.
Placing "atelier_estoc" and "atelier_tilt" within ASSETS simplifies their build process. Updated ModelName in assets.ts and added these model names to FRAMES in viewer.ts to allow direct viewer access via URL parameters. Added support for an ambient occlusion query parameter in viewer.ts enabling GTAO control.
The chamfer value adjustment to step(0.22, 0.52, turn) is intended to improve the visual rendering of the armor corners. This change aims to ensure that the chamfered edges, specifically those at a 45-degree angle (0.293), properly catch crease ink, preventing the value from dropping below the threshold of 0.35.
Next, the existing clip shots are being retained, ensuring backward compatibility. Two new sortie shots, 'hangar' and 'launch', are being introduced. The 'hangar' shot will showcase a mech in a hangar environment, while 'launch' will depict a launch sequence within a tube.
run_command{"CommandLine":"ls -la src/view/","WaitMsBeforeAsync":5000,"toolSummary":"List files in src/view"}
input
{ "CommandLine": "ls -la src/view/", "WaitMsBeforeAsync": 5000, "toolSummary": "List files in src/view" }result, 13 lines
Command exited with code 0. Command output: total 60 drwx------ 2 runner runner 4096 Nov 14 23:20 . drwx------ 8 runner runner 4096 Nov 14 23:20 .. -rw------- 1 runner runner 4459 Nov 14 23:20 cameras.ts -rw------- 1 runner runner 2810 Nov 14 23:20 clip-plan.test.ts -rw------- 1 runner runner 4271 Nov 14 23:20 clip-plan.ts -rw------- 1 runner runner 6266 Nov 14 23:20 clip.ts -rw------- 1 runner runner 5435 Nov 14 23:20 sheet.ts -rw------- 1 runner runner 7968 Nov 14 23:20 thrusters.ts -rw------- 1 runner runner 6991 Nov 14 23:20 viewer.ts
read_file{"Path":"~/work/sortie/src/view/clip-plan.test.ts"}
input
{ "Path": "~/work/sortie/src/view/clip-plan.test.ts" }result, 75 lines
Showing lines 1-74 of 74 1: import { describe, expect, it } from 'vitest'; 2: import { BEND_POSE, SHOTS, SHOT_NAMES, clipFrames, mixPose, shotView } from './clip-plan'; 3: 4: describe('clip timeline', () => { 5: it('runs every shot for its length, in the order asked', () => { 6: const f = clipFrames(['turn', 'chase'], 24); 7: expect(f).toHaveLength(Math.round(SHOTS.turn * 24) + Math.round(SHOTS.chase * 24)); 8: expect(f[0].shot).toBe('turn'); 9: expect(f[f.length - 1].shot).toBe('chase'); 10: }); 11: 12: it('marks the first frame of each shot as a cut, and no others', () => { 13: const f = clipFrames(['chase', 'orbit'], 24); 14: expect(f.filter((x) => x.cut).map((x) => x.shot)).toEqual(['chase', 'orbit']); 15: expect(f[0].cut).toBe(true); 16: }); 17: 18: it('runs u from 0 to 1 in a shot', () => { 19: const f = clipFrames(['turn'], 24); 20: expect(f[0].u).toBe(0); 21: expect(f[f.length - 1].u).toBe(1); 22: }); 23: 24: it('starts each thruster state at zero and counts up from there', () => { 25: const f = clipFrames(['chase'], 24); 26: const boost = f.filter((x) => x.state === 'boost'); 27: expect(boost[0].stateT).toBeCloseTo(0, 6); 28: expect(boost[1].stateT).toBeCloseTo(1 / 24, 6); 29: expect(f.map((x) => x.state)).toContain('quick'); 30: }); 31: 32: it('holds idle in shots with no schedule', () => { 33: expect(clipFrames(['scale'], 24).every((x) => x.state === 'idle')).toBe(true); 34: }); 35: 36: it('gives the same frames every run', () => { 37: expect(clipFrames(SHOT_NAMES, 24)).toEqual(clipFrames(SHOT_NAMES, 24)); 38: }); 39: }); 40: 41: describe('shot views', () => { 42: const at = (shot: 'chase' | 'turn' | 'bend' | 'scale', i: number) => shotView(clipFrames([shot], 24)[i]); 43: 44: it('turns a full circle in the turn shot, starting from behind', () => { 45: const f = clipFrames(['turn'], 24); 46: expect(shotView(f[0]).camYaw).toBe(180); 47: expect(shotView(f[f.length - 1]).camYaw).toBe(540); 48: }); 49: 50: it('uses the game camera only for the chase shot', () => { 51: expect(at('chase', 0).chase).toBe(true); 52: expect(at('turn', 0).chase).toBe(false); 53: }); 54: 55: it('starts and ends the bend shot unbent', () => { 56: const f = clipFrames(['bend'], 24); 57: expect(shotView(f[0]).bend).toBeCloseTo(0, 6); 58: expect(shotView(f[f.length - 1]).bend).toBeCloseTo(0, 6); 59: expect(Math.max(...f.map((x) => shotView(x).bend))).toBeGreaterThan(0.95); 60: }); 61: 62: it('has the pilot and deck in the scale shot only', () => { 63: expect(at('scale', 0).ground).toBe(true); 64: expect(at('chase', 0).ground).toBe(false); 65: }); 66: }); 67: 68: describe('mixPose', () => { 69: it('reaches each end pose and treats a missing joint as rest', () => { 70: expect(mixPose({}, BEND_POSE, 1)['thigh.L']).toEqual(BEND_POSE['thigh.L']); 71: expect(mixPose({}, BEND_POSE, 0)['thigh.L']).toEqual([0, 0, 0]); 72: expect(mixPose({}, { 'shin.L': [10, 0, 0] }, 0.5)['shin.L']).toEqual([5, 0, 0]); 73: }); 74: });
agent
+14:15reasoning
The tests in clip-plan.test.ts will pass if the chase behavior includes boost and quick. Considering adding 'assault' to chase.
0. Adjusting the schedule timings to ensure stateT is zero at the boundaries, given the 24 fps frame rate. The suggested schedule: [[0, 'cruise'], [0.75, 'quick'], [1.25, 'boost'], [2.25, 'assault']]. This guarantees exact integer multiples, avoiding the precision issues observed in the test.
Adjusted the schedule to accommodate the constraints of frame rates and state transitions. Added new states and ensured seamless integration with existing components like clipFrames and SHOT_NAMES. Designed precise camera choreography and geometry for various shots to ensure visual fidelity.
Observed a coordinate system change from Blender to Three.js for Bay 1. Confirmed work gantry post locations and side deck dimensions within Bay 1, noting the significant clear opening at the front. Cross-referenced atelier_estoc dimensions to ensure the design fits within the bay's open area.
Initial hypothesis: positioning the atelier_estoc in Bay 1 at the specified coordinates and rotation allows for optimal camera framing. Considered the pilot's position and camera travel to refine the shot's composition, focusing on the visual impact of the armor's details. Refined the initial position and rotation of the model within Bay 1 for optimal visual impact based on anticipated camera angle. Revised the initial shot plan for optimal camera framing and visual impact of the atelier_estoc model, while also placing the atelier_tilt at the opposing Bay 2.
Observed that the gantry post at Z = -3 could obstruct the view of the target at Z = -10. Calculated the sightline and confirmed the bay's 12m opening allows a clear view. The gantry post and hazard rails will frame the shot's left edge, providing depth.
Revised camera position and calculated the sightline to account for potential obstructions from the gantry post and side deck, discovering that a specific X-coordinate clears both. Determined the pilot's coordinates on the hangar deck and projected their position within the camera's field of view, calculating the vector from the camera to the look-target and the pilot's distance.
Calculated the field of view (FOV) needed to frame the entire mech within the shot, finding that a 44° FOV provides sufficient vertical span. Adjusted camera position to ensure the entire 18m mech, including the pilot, fits within the frame, accounting for hangar wall constraints. Verified the coordinates for Shot 2 within ship.glb to ensure camera perspective is correct.
Determined the bow door's Z-coordinate and its outward sliding movement along the X-axis. Identified the coordinates and states of the signal lamps.
Hypothesized a sequence for Shot 2 involving door opening, signal transition, and mech positioning, with a proposed initial camera position within the tube. Considered an alternative camera angle behind the mech to emphasize its design and the launch tube.
Observed the planned sequence: the overhead signal transitions, the bow doors open to reveal the planet, thrusters ignite, and the mech is launched. The camera tracks the mech down the launch tube and bursts out into sunlight, transitioning seamlessly to the open-space chase sequence. Verified all assets are in this planned sequence.
Examining Shots 3 and 4, ensuring alignment with the overall narrative and visual cues. Shot 3 will implement a dynamic camera chase sequence involving boosting and assault. Shot 4 requires a telephoto orbit shot, highlighting key design elements. Determined that these steps are present.
Inspecting kit/lib.py for potential modifications relevant to the object's appearance and export process. Specifically focusing on lines related to smoothing, weighted normals, and outline attributes within the export function. The lines 195-207 and 430-437 of the file kit/lib.py are the primary area of focus.
read_file{"EndLine":140,"Path":"~/work/sortie/kit/lab/knightkit.py","StartLine":1}
input
{ "EndLine": 140, "Path": "~/work/sortie/kit/lab/knightkit.py", "StartLine": 1 }result, 141 lines
Showing lines 1-140 of 535 1: """Sheets with compound curvature for the atelier direction board (kit/lab/atelier_board.py). 2: 3: Round 1's plates are cones and cylinders of even thickness: shell() intersects two flat outlines, so 4: it can only make flat and single curved faces. Knightly armour reads through domes, a curved profile 5: down every plate, raised ridges, flutes and rolled rims. These helpers make them: 6: 7: Sheet a plate t thick over a surface f(u, v): the outer face, the inner face set back along the 8: normals, closed round its edges. `disp` pushes the outer face out (ridges, flutes). 9: revolve a surface of revolution round a vertical axis, elliptical in plan, through a profile of 10: (radius, z) points: the profile curves, so the plate is domed, not a cone 11: bead a tube along a line of points: a rolled rim on a plate's edge, roped with `rope` 12: ridge, flutes displacement profiles across u 13: 14: Angles are degrees in plan, 0 is +X (outboard on the left), -90 the front (-Y), 90 the back. 15: """ 16: import math 17: 18: import bmesh 19: from mathutils import Vector 20: 21: 22: def lin(a, b, n): 23: """n + 1 values from a to b.""" 24: return [a + (b - a) * i / n for i in range(n + 1)] 25: 26: 27: def spline(pts): 28: """A Catmull-Rom curve through points (tuples), as a function of t in [0, 1].""" 29: P = [Vector(p) for p in pts] 30: n = len(P) - 1 31: 32: def at(t): 33: x = min(max(t, 0.0), 1.0) * n 34: i = min(int(x), n - 1) 35: s = x - i 36: p0, p1, p2, p3 = P[max(i - 1, 0)], P[i], P[i + 1], P[min(i + 2, n)] 37: return .5 * ((2 * p1) + (-p0 + p2) * s + (2 * p0 - 5 * p1 + 4 * p2 - p3) * s * s + (-p0 + 3 * p1 - 3 * p2 + p3) * s ** 3) 38: return at 39: 40: 41: class Sheet: 42: """A plate t thick over f(u, v) on the grid us x vs. `inside` is a point on the plate's inner side 43: (default: the centroid of the surface, right for domes and shells round a body). `disp(u, v)` 44: moves the outer face out along the normal. `wrap` closes the sheet round u.""" 45: 46: def __init__(self, f, us, vs, t, disp=None, inside=None, wrap=False): 47: self.us, self.vs, self.t, self.wrap = list(us), list(vs), t, wrap 48: nu, nv = len(self.us), len(self.vs) 49: S = [[Vector(f(u, v)) for v in self.vs] for u in self.us] 50: 51: def nrm(i, j): 52: if wrap: 53: a, b = S[(i + 1) % nu][j], S[(i - 1) % nu][j] 54: else: 55: a, b = S[min(i + 1, nu - 1)][j], S[max(i - 1, 0)][j] 56: c, d = S[i][min(j + 1, nv - 1)], S[i][max(j - 1, 0)] 57: n = (a - b).cross(c - d) 58: return n.normalized() if n.length > 1e-9 else None 59: N = [[nrm(i, j) for j in range(nv)] for i in range(nu)] 60: # a pole (a cap drawn from v = 0) has no normal of its own: it takes the mean of the next row's 61: for j in range(nv): 62: if any(N[i][j] is None for i in range(nu)): 63: k = j + 1 if j + 1 < nv else j - 1 64: m = sum((n for n in (N[i][k] for i in range(nu)) if n is not None), Vector()) 65: m = m.normalized() if m.length > 1e-9 else Vector((0, 0, 1)) 66: for i in range(nu): 67: if N[i][j] is None: 68: N[i][j] = m 69: c = Vector(inside) if inside is not None else sum((p for row in S for p in row), Vector()) / (nu * nv) 70: if sum(N[i][j].dot(S[i][j] - c) for i in range(nu) for j in range(nv)) < 0: 71: N = [[-n for n in row] for row in N] 72: if disp is not None: 73: S = [[S[i][j] + N[i][j] * disp(self.us[i], self.vs[j]) for j in range(nv)] for i in range(nu)] 74: self.O, self.N = S, N 75: self.I = [[S[i][j] - N[i][j] * t for j in range(nv)] for i in range(nu)] 76: 77: def bm(self): 78: bm = bmesh.new() 79: nu, nv = len(self.us), len(self.vs) 80: O = [[bm.verts.new(p) for p in row] for row in self.O] 81: I = [[bm.verts.new(p) for p in row] for row in self.I] 82: iu = range(nu) if self.wrap else range(nu - 1) 83: for i in iu: 84: k = (i + 1) % nu 85: for j in range(nv - 1): 86: bm.faces.new((O[i][j], O[k][j], O[k][j + 1], O[i][j + 1])) 87: bm.faces.new((I[i][j + 1], I[k][j + 1], I[k][j], I[i][j])) 88: bm.faces.new((O[i][0], I[i][0], I[k][0], O[k][0])) 89: bm.faces.new((O[k][-1], I[k][-1], I[i][-1], O[i][-1])) 90: if not self.wrap: 91: for j in range(nv - 1): 92: bm.faces.new((O[0][j + 1], I[0][j + 1], I[0][j], O[0][j])) 93: bm.faces.new((O[-1][j], I[-1][j], I[-1][j + 1], O[-1][j + 1])) 94: bmesh.ops.remove_doubles(bm, verts=bm.verts, dist=1e-6) # closes a pole 95: bmesh.ops.recalc_face_normals(bm, faces=bm.faces) 96: return bm 97: 98: def edge(self, side, at=.5, out=0.0): 99: """Points along one edge (u0, u1, v0, v1), `at` of the way through the thickness, pushed `out` 100: along the normal.""" 101: nu, nv = len(self.us), len(self.vs) 102: idx = {"u0": [(0, j) for j in range(nv)], "u1": [(nu - 1, j) for j in range(nv)], 103: "v0": [(i, 0) for i in range(nu)], "v1": [(i, nv - 1) for i in range(nu)]}[side] 104: return [self.O[i][j] - self.N[i][j] * (self.t * at - out) for i, j in idx] 105: 106: def point(self, i, j, out=0.0): 107: return self.O[i][j] + self.N[i][j] * out 108: 109: 110: def revolve(c, profile, kx=1.0, ky=1.0, steps=40): 111: """f(u, v) for a surface round a vertical axis through c = (x, y): u the plan angle in degrees, v in 112: [0, 1] along the profile, a list of (radius, z) points (or a function of v). kx and ky stretch the 113: plan into an ellipse. A profile that curves makes the plate domed.""" 114: prof = profile if callable(profile) else spline(profile) 115: 116: def f(u, v): 117: r, z = prof(v)[:2] 118: a = math.radians(u) 119: return (c[0] + r * kx * math.cos(a), c[1] + r * ky * math.sin(a), z) 120: return f 121: 122: 123: def tent(x, x0, w): 124: """1 at x0, falling linearly to 0 at x0 +- w: a ridge with a crease on its crest.""" 125: return max(0.0, 1.0 - abs(x - x0) / w) 126: 127: 128: def flutes(x, x0, x1, n, w=.5): 129: """n rounded flutes between x0 and x1, each `w` of its pitch wide, 0 between them.""" 130: if not (x0 <= x <= x1): 131: return 0.0 132: s = (x - x0) / (x1 - x0) * n 133: f = s - math.floor(s) 134: d = abs(f - .5) / (w / 2) 135: return math.cos(min(d, 1.0) * math.pi / 2) ** 2 if d < 1 else 0.0 136: 137: 138: def smooth(x, a, b): 139: """0 below a, 1 above b, smooth between.""" 140: t = min(max((x - a) / (b - a), 0.0), 1.0)read_file{"EndLine":340,"Path":"~/work/sortie/kit/lab/knightkit.py","StartLine":250}
input
{ "EndLine": 340, "Path": "~/work/sortie/kit/lab/knightkit.py", "StartLine": 250 }result, 92 lines
Showing lines 250-340 of 535 250: Z1 = z1 if callable(z1) else (lambda u: z1) 251: if callable(r): 252: R = r 253: elif isinstance(r, (int, float)): 254: R = lambda u, v: r 255: elif len(r) == 2: 256: R = lambda u, v: r[0] + (r[1] - r[0]) * v 257: else: 258: g = curve(r) 259: R = lambda u, v: g(v) 260: 261: def f(u, v): 262: a = math.radians(u) 263: rr = R(u, v) 264: return (c[0] + rr * kx * math.cos(a), c[1] + rr * ky * math.sin(a), Z0(u) + (Z1(u) - Z0(u)) * v) 265: um = us[len(us) // 2] 266: if wrap: 267: us = list(us)[:-1] # a closed ring: the last angle is the first 268: return Sheet(f, us, lin(0, 1, nv), t, disp=disp, inside=(c[0], c[1], (Z0(um) + Z1(um)) / 2), wrap=wrap) 269: 270: 271: def helm(P, J, g, extra=None, base=True): 272: """The atelier's helm (makers.atelier) with `extra(P, J)` adding parts on the head joint, all 273: seated low between the pauldrons as atelier.head does. base=False leaves the atelier helm out, for a 274: line that draws its own (its shell must be named head_helmet, which atelier.crown_z reads).""" 275: from mathutils import Matrix 276: 277: from makers import atelier 278: H = J["head"] 279: if base: 280: atelier._head(P, J, g) 281: if extra is not None: 282: extra(P, J) 283: m = Matrix.Translation((0, 0, -atelier.HEAD_DROP)) 284: for o in H.children: 285: if o.type == "MESH": 286: for v in o.data.vertices: 287: v.co = m @ v.co 288: 289: 290: def horn(pts, r0, n=10, power=1.4, squash=1.0, up=(0, 0, 1)): 291: """A solid tapering from radius r0 at the first point to a sharp tip at the last, along a line of 292: points (bend it for a swept horn). `squash` flattens the section across `up`: a blade.""" 293: P = [Vector(p) for p in pts] 294: m = len(P) 295: L = [0.0] 296: for i in range(1, m): 297: L.append(L[-1] + (P[i] - P[i - 1]).length) 298: bm = bmesh.new() 299: rings = [] 300: for i in range(m): 301: t = (P[min(i + 1, m - 1)] - P[max(i - 1, 0)]).normalized() 302: a = Vector(up) - t * Vector(up).dot(t) 303: a = a.normalized() if a.length > 1e-6 else t.orthogonal().normalized() 304: b = t.cross(a) 305: r = r0 * max(1 - L[i] / L[-1], 0.0) ** power 306: if i == m - 1: 307: rings.append([bm.verts.new(P[i])]) 308: break 309: rings.append([bm.verts.new(P[i] + (a * math.cos(2 * math.pi * k / n) + b * squash * math.sin(2 * math.pi * k / n)) * r) for k in range(n)]) 310: for i in range(m - 2): 311: x, y = rings[i], rings[i + 1] 312: for k in range(n): 313: bm.faces.new((x[k], x[(k + 1) % n], y[(k + 1) % n], y[k])) 314: tip = rings[-1][0] 315: last = rings[-2] 316: for k in range(n): 317: bm.faces.new((last[k], last[(k + 1) % n], tip)) 318: bm.faces.new(list(reversed(rings[0]))) 319: bmesh.ops.recalc_face_normals(bm, faces=bm.faces) 320: return bm 321: 322: 323: def shoulder_root(P, J, role="main"): 324: """Round 1's cover over the step from the chest to the shoulder joint (makers.atelier.shoulder).""" 325: from makers import atelier 326: S = (J["shoulder", "L"], J["shoulder", "R"]) 327: P.solid("shoulder_root", atelier.sheet(atelier.rect(1.6, 2.0, 14.0, 15.05), [(-.8, 14.0), (.25, 14.0), (.25, 15.05), (-.5, 15.05), (-.8, 14.8)], 328: atelier.ring((1.8, -.1), (.3, .72), 180, 360)), role, *S) 329: 330: 331: def strip(path, w, t, grow_f): 332: """A flat band of width w along a path on a surface: path(s) -> (u, z) for s in [0, 1], grow_f(u, z, out) -> 333: the surface point at plan angle u and height z pushed out by `out`.""" 334: def f(s, k): 335: u, z = path(s) 336: return grow_f(u, z + k * w / 2, 0.0) 337: return Sheet(f, lin(0, 1, 16), lin(-1, 1, 2), t, inside=(0, 0, 13.6)) 338: 339: 340: def sabaton(P, J, lames=((.55, -3.35),), point=1.0, keel=0.0, rims="front", rope=0.0, role="main"):read_file{"EndLine":250,"Path":"~/work/sortie/kit/lab/knightkit.py","StartLine":180}
input
{ "EndLine": 250, "Path": "~/work/sortie/kit/lab/knightkit.py", "StartLine": 180 }result, 72 lines
Showing lines 180-250 of 535 180: rings.append(ring) 181: for i in range(m if closed else m - 1): 182: a, b = rings[i], rings[(i + 1) % m] 183: for k in range(n): 184: bm.faces.new((a[k], a[(k + 1) % n], b[(k + 1) % n], b[k])) 185: if not closed: 186: bm.faces.new(list(reversed(rings[0]))) 187: bm.faces.new(rings[-1]) 188: bmesh.ops.recalc_face_normals(bm, faces=bm.faces) 189: return bm 190: 191: 192: def rivets(pts, r=.06, n=6): 193: """Small domed studs at points [(position, normal)].""" 194: bm = bmesh.new() 195: for p, nn in pts: 196: p, nn = Vector(p), Vector(nn).normalized() 197: a = nn.orthogonal().normalized() 198: b = nn.cross(a) 199: base = [bm.verts.new(p + (a * math.cos(2 * math.pi * k / n) + b * math.sin(2 * math.pi * k / n)) * r - nn * r * .3) for k in range(n)] 200: mid = [bm.verts.new(p + (a * math.cos(2 * math.pi * k / n) + b * math.sin(2 * math.pi * k / n)) * r * .75 + nn * r * .35) for k in range(n)] 201: tip = bm.verts.new(p + nn * r * .6) 202: bm.faces.new(list(reversed(base))) 203: for k in range(n): 204: j = (k + 1) % n 205: bm.faces.new((base[k], base[j], mid[j], mid[k])) 206: bm.faces.new((mid[k], mid[j], tip)) 207: bmesh.ops.recalc_face_normals(bm, faces=bm.faces) 208: return bm 209: 210: 211: def cap(c, axis, radii, up=(0, 0, 1)): 212: """f(u, v) for an ellipsoid round c with its pole along `axis`: u the angle round the axis in 213: degrees (0 toward `up`), v the angle from the pole in degrees. radii = (across up, across, along 214: the axis). Elbow and knee cops, fans and domes that face sideways.""" 215: z = Vector(axis).normalized() 216: x = Vector(up) - z * Vector(up).dot(z) 217: x = x.normalized() if x.length > 1e-6 else z.orthogonal().normalized() 218: y = z.cross(x) 219: c = Vector(c) 220: ra, rb, rp = radii 221: 222: def f(u, v): 223: a, b = math.radians(u), math.radians(v) 224: return c + x * (ra * math.sin(b) * math.cos(a)) + y * (rb * math.sin(b) * math.sin(a)) + z * (rp * math.cos(b)) 225: return f 226: 227: 228: def put(P, name, sheet, role, jl, jr=None, bevel=.012): 229: """A sheet as a plate on a joint (mirrored onto jr).""" 230: P.solid(name, sheet.bm(), role, jl, jr, bevel=bevel) 231: 232: 233: def rim(P, name, pts, r, jl, jr=None, role="trim", rope=0.0, closed=False): 234: """A rolled rim along points, in trim by default.""" 235: P.solid(name, bead(pts, r, rope=rope, closed=closed), role, jl, jr, bevel=0) 236: 237: 238: def curve(vals): 239: """A smooth function on [0, 1] through evenly spaced values.""" 240: n = len(vals) - 1 241: s = spline([(i / n, v) for i, v in enumerate(vals)]) 242: return lambda t: s(t)[1] 243: 244: 245: def band(c, z0, z1, r, us, nv=6, kx=1.0, ky=1.0, t=.12, disp=None, wrap=False): 246: """A sheet round a vertical axis through c = (x, y) from height z0 to z1 (numbers or functions of 247: u). The radius r is a number, a pair (at z0, at z1), a list of evenly spaced values or a function 248: r(u, v), with v 0 at z0 and 1 at z1. Lames, tassets, greaves, sleeves.""" 249: Z0 = z0 if callable(z0) else (lambda u: z0) 250: Z1 = z1 if callable(z1) else (lambda u: z1)
agent
+15:21reasoning
The code suggests a plate-like component, knightkit.Sheet, is fundamental. It's used in a function put that places the sheet onto a joint. The mirroring behavior of jr in the put function requires further investigation. The bevel parameter's purpose is unclear and needs analysis.
edit_file{"Path":"~/work/sortie/kit/lib.py","Replacement":" me = o.data\n if smooth:\n me.shade_smooth()\n me.set_sharp_from_angle(angle=math.radians(65 if bevel > 0 else 35))\n if bevel > 0:\n o[\"weighted_normal\"] = True\n if not outline:\n o[\"outline\"] = False\n if parent is not None:\n attach(o, parent)\n return o","Target":" me = o.data\n if smooth:\n me.shade_smooth()\n me.set_sharp_from_angle(angle=math.radians(35))\n if not outline:\n o[\"outline\"] = False\n if parent is not None:\n attach(o, parent)\n return o"}
input
{ "Path": "~/work/sortie/kit/lib.py", "Replacement": " me = o.data\n if smooth:\n me.shade_smooth()\n me.set_sharp_from_angle(angle=math.radians(65 if bevel > 0 else 35))\n if bevel > 0:\n o[\"weighted_normal\"] = True\n if not outline:\n o[\"outline\"] = False\n if parent is not None:\n attach(o, parent)\n return o", "Target": " me = o.data\n if smooth:\n me.shade_smooth()\n me.set_sharp_from_angle(angle=math.radians(35))\n if not outline:\n o[\"outline\"] = False\n if parent is not None:\n attach(o, parent)\n return o" }result, 1 line
Made 1 replacement in ~/work/sortie/kit/lib.py starting at line 198 (+3/-1 lines).
edit_file{"Path":"~/work/sortie/kit/lib.py","Replacement":"def export(path, extras=True):\n for o in list(bpy.data.objects):\n if o.type == \"MESH\" and o.get(\"weighted_normal\"):\n del o[\"weighted_normal\"]\n o.data.shade_smooth()\n o.data.set_sharp_from_angle(angle=math.radians(65))\n wn = o.modifiers.new(\"wn\", \"WEIGHTED_NORMAL\")\n wn.keep_sharp = True\n wn.weight = 50\n bake(o)\n bpy.ops.export_scene.gltf(filepath=path, export_format=\"GLB\", export_apply=True, export_yup=True,\n export_extras=extras, export_cameras=False, export_lights=False,\n export_materials=\"EXPORT\", export_normals=True, export_texcoords=False)","Target":"def export(path, extras=True):\n bpy.ops.export_scene.gltf(filepath=path, export_format=\"GLB\", export_apply=True, export_yup=True,\n export_extras=extras, export_cameras=False, export_lights=False,\n export_materials=\"EXPORT\", export_normals=True, export_texcoords=False)"}
input
{ "Path": "~/work/sortie/kit/lib.py", "Replacement": "def export(path, extras=True):\n for o in list(bpy.data.objects):\n if o.type == \"MESH\" and o.get(\"weighted_normal\"):\n del o[\"weighted_normal\"]\n o.data.shade_smooth()\n o.data.set_sharp_from_angle(angle=math.radians(65))\n wn = o.modifiers.new(\"wn\", \"WEIGHTED_NORMAL\")\n wn.keep_sharp = True\n wn.weight = 50\n bake(o)\n bpy.ops.export_scene.gltf(filepath=path, export_format=\"GLB\", export_apply=True, export_yup=True,\n export_extras=extras, export_cameras=False, export_lights=False,\n export_materials=\"EXPORT\", export_normals=True, export_texcoords=False)", "Target": "def export(path, extras=True):\n bpy.ops.export_scene.gltf(filepath=path, export_format=\"GLB\", export_apply=True, export_yup=True,\n export_extras=extras, export_cameras=False, export_lights=False,\n export_materials=\"EXPORT\", export_normals=True, export_texcoords=False)" }result, 1 line
Made 1 replacement in ~/work/sortie/kit/lib.py starting at line 436 (+9/-0 lines).
edit_file{"Path":"~/work/sortie/kit/build.py","Replacement":"from atelier_lab import build_atelier_lab # noqa: E402\nfrom atelier_board import build as build_atelier, build_atelier_line # noqa: E402","Target":"from atelier_lab import build_atelier_lab # noqa: E402\nfrom atelier_board import build_atelier_line # noqa: E402"}
input
{ "Path": "~/work/sortie/kit/build.py", "Replacement": "from atelier_lab import build_atelier_lab # noqa: E402\nfrom atelier_board import build as build_atelier, build_atelier_line # noqa: E402", "Target": "from atelier_lab import build_atelier_lab # noqa: E402\nfrom atelier_board import build_atelier_line # noqa: E402" }result, 1 line
Made 1 replacement in ~/work/sortie/kit/build.py starting at line 35 (+1/-1 lines).
edit_file{"Path":"~/work/sortie/kit/build.py","Replacement":" \"pattern_m\": build_pattern_m, \"atelier_estoc\": lambda: build_atelier(\"b\", \"medium\"), \"atelier_tilt\": lambda: build_atelier(\"d\", \"medium\"),\n \"lab_pattern\": build_pattern_lab, \"lab_atelier\": build_atelier_lab, \"lab_atelier_a\": lambda: build_atelier_line(\"a\"), \"lab_atelier_b\": lambda: build_atelier_line(\"b\"),","Target":" \"pattern_m\": build_pattern_m, \"lab_pattern\": build_pattern_lab, \"lab_atelier\": build_atelier_lab, \"lab_atelier_a\": lambda: build_atelier_line(\"a\"), \"lab_atelier_b\": lambda: build_atelier_line(\"b\"),"}
input
{ "Path": "~/work/sortie/kit/build.py", "Replacement": " \"pattern_m\": build_pattern_m, \"atelier_estoc\": lambda: build_atelier(\"b\", \"medium\"), \"atelier_tilt\": lambda: build_atelier(\"d\", \"medium\"),\n \"lab_pattern\": build_pattern_lab, \"lab_atelier\": build_atelier_lab, \"lab_atelier_a\": lambda: build_atelier_line(\"a\"), \"lab_atelier_b\": lambda: build_atelier_line(\"b\"),", "Target": " \"pattern_m\": build_pattern_m, \"lab_pattern\": build_pattern_lab, \"lab_atelier\": build_atelier_lab, \"lab_atelier_a\": lambda: build_atelier_line(\"a\"), \"lab_atelier_b\": lambda: build_atelier_line(\"b\")," }result, 1 line
Made 1 replacement in ~/work/sortie/kit/build.py starting at line 54 (+2/-1 lines).
edit_file{"Path":"~/work/sortie/src/render/assets.ts","Replacement":"export type ModelName = 'alien_acicular' | 'alien_druse' | 'alien_druse_mimic' | 'alien_geode'\n | 'striker' | 'striker_a' | 'striker_b' | 'atelier_estoc' | 'atelier_tilt' | 'light' | 'light_line' | 'light_lancer' | 'heavy' | 'heavy_B' | 'heavy_C'\n | 'auto_tally' | 'auto_tick' | 'auto_ledger' | 'rifle' | 'cannon' | 'drone' | 'cockpit' | 'cockpit_light' | 'ship' | 'station'\n | 'wreck_field' | 'salvage_pod' | 'escape_pod' | 'raider_grunt' | 'raider_brawler' | 'raider_boss';","Target":"export type ModelName = 'alien_acicular' | 'alien_druse' | 'alien_druse_mimic' | 'alien_geode'\n | 'striker' | 'striker_a' | 'striker_b' | 'light' | 'light_line' | 'light_lancer' | 'heavy' | 'heavy_B' | 'heavy_C'\n | 'auto_tally' | 'auto_tick' | 'auto_ledger' | 'rifle' | 'cannon' | 'drone' | 'cockpit' | 'cockpit_light' | 'ship' | 'station'\n | 'wreck_field' | 'salvage_pod' | 'escape_pod' | 'raider_grunt' | 'raider_brawler' | 'raider_boss';"}
input
{ "Path": "~/work/sortie/src/render/assets.ts", "Replacement": "export type ModelName = 'alien_acicular' | 'alien_druse' | 'alien_druse_mimic' | 'alien_geode'\n | 'striker' | 'striker_a' | 'striker_b' | 'atelier_estoc' | 'atelier_tilt' | 'light' | 'light_line' | 'light_lancer' | 'heavy' | 'heavy_B' | 'heavy_C'\n | 'auto_tally' | 'auto_tick' | 'auto_ledger' | 'rifle' | 'cannon' | 'drone' | 'cockpit' | 'cockpit_light' | 'ship' | 'station'\n | 'wreck_field' | 'salvage_pod' | 'escape_pod' | 'raider_grunt' | 'raider_brawler' | 'raider_boss';", "Target": "export type ModelName = 'alien_acicular' | 'alien_druse' | 'alien_druse_mimic' | 'alien_geode'\n | 'striker' | 'striker_a' | 'striker_b' | 'light' | 'light_line' | 'light_lancer' | 'heavy' | 'heavy_B' | 'heavy_C'\n | 'auto_tally' | 'auto_tick' | 'auto_ledger' | 'rifle' | 'cannon' | 'drone' | 'cockpit' | 'cockpit_light' | 'ship' | 'station'\n | 'wreck_field' | 'salvage_pod' | 'escape_pod' | 'raider_grunt' | 'raider_brawler' | 'raider_boss';" }result, 1 line
Made 1 replacement in ~/work/sortie/src/render/assets.ts starting at line 14 (+1/-1 lines).
edit_file{"Path":"~/work/sortie/src/render/decals.ts","Replacement":" { kind: 'stencil', text: 'STRIKER', at: [-2.6, 3.4, 0.15], dir: [1, 0, 0], size: [0.9, 0.2], roll: 90, color: '#e9edf0' },\n];\n\n/** An emblem at every bearing anchor (bearing.*) of a model, using the anchor's direction and size. */\nexport function bearingDecals(root: THREE.Object3D, color: string): DecalSpec[] {\n root.updateMatrixWorld(true);\n const out: DecalSpec[] = [];\n root.traverse((o) => {\n if (!o.name.startsWith('bearing') || !o.visible) return;\n const at = root.worldToLocal(o.getWorldPosition(new THREE.Vector3()));\n const dir = o.userData.dir as [number, number, number] | undefined;\n const size = Number(o.userData.size ?? 0.5);\n if (dir) out.push({ kind: 'emblem', at: [at.x, at.y, at.z], dir, size: [size, size], color });\n });\n return out;\n}","Target":" { kind: 'stencil', text: 'STRIKER', at: [-2.6, 3.4, 0.15], dir: [1, 0, 0], size: [0.9, 0.2], roll: 90, color: '#e9edf0' },\n];"}
input
{ "Path": "~/work/sortie/src/render/decals.ts", "Replacement": " { kind: 'stencil', text: 'STRIKER', at: [-2.6, 3.4, 0.15], dir: [1, 0, 0], size: [0.9, 0.2], roll: 90, color: '#e9edf0' },\n];\n\n/** An emblem at every bearing anchor (bearing.*) of a model, using the anchor's direction and size. */\nexport function bearingDecals(root: THREE.Object3D, color: string): DecalSpec[] {\n root.updateMatrixWorld(true);\n const out: DecalSpec[] = [];\n root.traverse((o) => {\n if (!o.name.startsWith('bearing') || !o.visible) return;\n const at = root.worldToLocal(o.getWorldPosition(new THREE.Vector3()));\n const dir = o.userData.dir as [number, number, number] | undefined;\n const size = Number(o.userData.size ?? 0.5);\n if (dir) out.push({ kind: 'emblem', at: [at.x, at.y, at.z], dir, size: [size, size], color });\n });\n return out;\n}", "Target": " { kind: 'stencil', text: 'STRIKER', at: [-2.6, 3.4, 0.15], dir: [1, 0, 0], size: [0.9, 0.2], roll: 90, color: '#e9edf0' },\n];" }result, 1 line
Made 1 replacement in ~/work/sortie/src/render/decals.ts starting at line 137 (+14/-0 lines).
edit_file{"Path":"~/work/sortie/src/render/look.ts","Replacement":" float edge = max(smoothstep(0.22, 0.52, turn), smoothstep(0.015, 0.04, zs / z0));","Target":" float edge = max(smoothstep(0.35, 0.7, turn), smoothstep(0.015, 0.04, zs / z0));"}
input
{ "Path": "~/work/sortie/src/render/look.ts", "Replacement": " float edge = max(smoothstep(0.22, 0.52, turn), smoothstep(0.015, 0.04, zs / z0));", "Target": " float edge = max(smoothstep(0.35, 0.7, turn), smoothstep(0.015, 0.04, zs / z0));" }result, 1 line
Made 1 replacement in ~/work/sortie/src/render/look.ts starting at line 103 (+1/-1 lines).
edit_file{"Path":"~/work/sortie/src/view/viewer.ts","Replacement":"import { STRIKER_DECALS, applyDecals, bearingDecals } from '../render/decals';\nimport { PALETTES } from '../render/palette';\nimport { look, setLook } from '../render/look';\nimport { treatEyes, type EyeMode } from '../render/eyes';\nimport { fitShip } from '../render/ship';\nimport type { FrameClassId } from '../sim/frames';\n\n/**\n * Model viewer for review shots, in the game's own renderer:\n * /?view=striker&yaw=35&pitch=8&dist=34&pose=flight&weapon=rifle&palette=automaton\n * /?view=lineup (the frame in each palette, side by side)\n * /?view=ship&bays=light,heavy&frame=light (bay fits and shuttle clamps)\n * /?view=light&pose=launch&weapon=rifle (light and heavy frames and their variants pose like the striker)\n */\nconst FRAMES: string[] = ['striker_a', 'striker_b', 'atelier_estoc', 'atelier_tilt', 'light', 'light_line', 'light_lancer', 'heavy', 'heavy_B', 'heavy_C'];\n\nexport async function startViewer(canvas: HTMLCanvasElement, q: URLSearchParams) {\n setLook(q.get('look'));\n await document.fonts.ready;\n const scene = new THREE.Scene();\n const camera = new THREE.PerspectiveCamera(Number(q.get('fov') ?? 35), 1, 0.5, 2e5);\n // ?bg=studio: a plain grey ground, an even room light and little bloom, for judging shape\n const studio = q.get('bg') === 'studio';\n const backdrop = createBackdrop();\n const pipe = new Pipeline(canvas, scene, camera, studio ? null : backdrop);\n if (q.get('ao') === '1') pipe.setQuality({ ao: true });","Target":"import { STRIKER_DECALS, applyDecals, type DecalSpec } from '../render/decals';\nimport { PALETTES } from '../render/palette';\nimport { look, setLook } from '../render/look';\nimport { treatEyes, type EyeMode } from '../render/eyes';\nimport { fitShip } from '../render/ship';\nimport type { FrameClassId } from '../sim/frames';\n\n/**\n * Model viewer for review shots, in the game's own renderer:\n * /?view=striker&yaw=35&pitch=8&dist=34&pose=flight&weapon=rifle&palette=automaton\n * /?view=lineup (the frame in each palette, side by side)\n * /?view=ship&bays=light,heavy&frame=light (bay fits and shuttle clamps)\n * /?view=light&pose=launch&weapon=rifle (light and heavy frames and their variants pose like the striker)\n */\nconst FRAMES: string[] = ['striker_a', 'striker_b', 'light', 'light_line', 'light_lancer', 'heavy', 'heavy_B', 'heavy_C'];\n\n/** An emblem at every bearing anchor of a model: the anchor's position, its direction into the plate, its size. */\nfunction bearingDecals(root: THREE.Object3D, color: string): DecalSpec[] {\n root.updateMatrixWorld(true);\n const out: DecalSpec[] = [];\n root.traverse((o) => {\n if (!o.name.startsWith('bearing') || !o.visible) return;\n const at = root.worldToLocal(o.getWorldPosition(new THREE.Vector3()));\n const dir = o.userData.dir as [number, number, number] | undefined;\n const size = Number(o.userData.size ?? 0.5);\n if (dir) out.push({ kind: 'emblem', at: [at.x, at.y, at.z], dir, size: [size, size], color });\n });\n return out;\n}\n\nexport async function startViewer(canvas: HTMLCanvasElement, q: URLSearchParams) {\n setLook(q.get('look'));\n await document.fonts.ready;\n const scene = new THREE.Scene();\n const camera = new THREE.PerspectiveCamera(Number(q.get('fov') ?? 35), 1, 0.5, 2e5);\n // ?bg=studio: a plain grey ground, an even room light and little bloom, for judging shape\n const studio = q.get('bg') === 'studio';\n const backdrop = createBackdrop();\n const pipe = new Pipeline(canvas, scene, camera, studio ? null : backdrop);"}
input
{ "Path": "~/work/sortie/src/view/viewer.ts", "Replacement": "import { STRIKER_DECALS, applyDecals, bearingDecals } from '../render/decals';\nimport { PALETTES } from '../render/palette';\nimport { look, setLook } from '../render/look';\nimport { treatEyes, type EyeMode } from '../render/eyes';\nimport { fitShip } from '../render/ship';\nimport type { FrameClassId } from '../sim/frames';\n\n/**\n * Model viewer for review shots, in the game's own renderer:\n * /?view=striker&yaw=35&pitch=8&dist=34&pose=flight&weapon=rifle&palette=automaton\n * /?view=lineup (the frame in each palette, side by side)\n * /?view=ship&bays=light,heavy&frame=light (bay fits and shuttle clamps)\n * /?view=light&pose=launch&weapon=rifle (light and heavy frames and their variants pose like the striker)\n */\nconst FRAMES: string[] = ['striker_a', 'striker_b', 'atelier_estoc', 'atelier_tilt', 'light', 'light_line', 'light_lancer', 'heavy', 'heavy_B', 'heavy_C'];\n\nexport async function startViewer(canvas: HTMLCanvasElement, q: URLSearchParams) {\n setLook(q.get('look'));\n await document.fonts.ready;\n const scene = new THREE.Scene();\n const camera = new THREE.PerspectiveCamera(Number(q.get('fov') ?? 35), 1, 0.5, 2e5);\n // ?bg=studio: a plain grey ground, an even room light and little bloom, for judging shape\n const studio = q.get('bg') === 'studio';\n const backdrop = createBackdrop();\n const pipe = new Pipeline(canvas, scene, camera, studio ? null : backdrop);\n if (q.get('ao') === '1') pipe.setQuality({ ao: true });", "Target": "import { STRIKER_DECALS, applyDecals, type DecalSpec } from '../render/decals';\nimport { PALETTES } from '../render/palette';\nimport { look, setLook } from '../render/look';\nimport { treatEyes, type EyeMode } from '../render/eyes';\nimport { fitShip } from '../render/ship';\nimport type { FrameClassId } from '../sim/frames';\n\n/**\n * Model viewer for review shots, in the game's own renderer:\n * /?view=striker&yaw=35&pitch=8&dist=34&pose=flight&weapon=rifle&palette=automaton\n * /?view=lineup (the frame in each palette, side by side)\n * /?view=ship&bays=light,heavy&frame=light (bay fits and shuttle clamps)\n * /?view=light&pose=launch&weapon=rifle (light and heavy frames and their variants pose like the striker)\n */\nconst FRAMES: string[] = ['striker_a', 'striker_b', 'light', 'light_line', 'light_lancer', 'heavy', 'heavy_B', 'heavy_C'];\n\n/** An emblem at every bearing anchor of a model: the anchor's position, its direction into the plate, its size. */\nfunction bearingDecals(root: THREE.Object3D, color: string): DecalSpec[] {\n root.updateMatrixWorld(true);\n const out: DecalSpec[] = [];\n root.traverse((o) => {\n if (!o.name.startsWith('bearing') || !o.visible) return;\n const at = root.worldToLocal(o.getWorldPosition(new THREE.Vector3()));\n const dir = o.userData.dir as [number, number, number] | undefined;\n const size = Number(o.userData.size ?? 0.5);\n if (dir) out.push({ kind: 'emblem', at: [at.x, at.y, at.z], dir, size: [size, size], color });\n });\n return out;\n}\n\nexport async function startViewer(canvas: HTMLCanvasElement, q: URLSearchParams) {\n setLook(q.get('look'));\n await document.fonts.ready;\n const scene = new THREE.Scene();\n const camera = new THREE.PerspectiveCamera(Number(q.get('fov') ?? 35), 1, 0.5, 2e5);\n // ?bg=studio: a plain grey ground, an even room light and little bloom, for judging shape\n const studio = q.get('bg') === 'studio';\n const backdrop = createBackdrop();\n const pipe = new Pipeline(canvas, scene, camera, studio ? null : backdrop);" }result, 1 line
Made 1 replacement in ~/work/sortie/src/view/viewer.ts starting at line 9 (+3/-16 lines).