A 3D model pipeline, pushed by Gemini 4 Carbon
agent
+1:36:43reasoning
Observing the battle_frame_after.png image, a significant transformation in the character's hairstyle and facial features is evident. The changes include sculpted bangs, side-tresses, a high ponytail, and a mature facial rendering, suggesting a dramatic evolution from a prior state.
The character's design is drastically improved, highlighted by the enhanced facial features and hairstyle; the "luminous sapphire eyes" and silhouette are a significant advancement. Further visual inspection revealed four specific flaws in the armor's rendering: chest and skirt pokethrough, a leg seam issue, an issue on the sword, and problems with the shield design. These flaws can likely be fixed by adjusting the armoring configuration of the components of the model.
The armoring of the character has several overlapping issues. The tunic is penetrating the gorget and upper chest skin, requiring adjustments to the skin triangles and armor clearance to resolve. Additionally, the underkirtle is poking through the surcoat panel, necessitating a slim-down of either the kirtle or the surcoat for proper visual separation.
Initial armoring adjustments resolved the chest and skirt pokethrough, achieving clean layering. Analyzing the perspective view, the image framed Valen's chest, not her face, because the camera target was incorrectly set for her sternum rather than her head's position based on her leg length. Correcting the camera's target to her face and adjusting the height and angles will frame her face, the upper parts of the armor, and the sword, allowing for a clear demonstration of the Flattice Off vs On comparison.
The squinting eyes and high hairline on Korin stem from unintentionally double-applying facial morphs. The initial build incorporated "veteran" features within a pre-sculpted model. Overriding that with G.shape("stocky", "veteran") compounded those same facial characteristics. Removing the duplicate application of "veteran" restores the intended handsome features.
Lowering Korin's bang elevation to the 88-98 degree range naturally sweeps his bangs across his brow. Further refinement of Korin's fur mantle involves restricting the azimuthal angle to keep it draped across the shoulders and upper back.
Observing Valen's sword in the battle frame, the blade's sleekness is apparent; a small vertical cylinder near her belt is actually her dagger grip. The location of the dagger grip on her belt requires further investigation to resolve the camera positioning issues.
read_file{"EndLine":875,"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","StartLine":700}
input
{ "EndLine": 875, "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "StartLine": 700 }result, 177 lines
Showing lines 700-875 of 1457 700: 701: pieces = [] 702: add = lambda nm, role, pos_nrm_tri, bind_tag, grp="plate": pieces.append( 703: (nm, role, pos_nrm_tri[0], pos_nrm_tri[1], pos_nrm_tri[2], bind_tag, grp) 704: ) 705: 706: # 1. High-Collar Midnight-Indigo Quilted Arming Tunic + Officer Collar with Gold Rim 707: nu_t, nv_t = 44, 16 708: az_t = np.linspace(-180, 180, nu_t, endpoint=False) 709: tun_g = np.zeros((nu_t, nv_t, 3)) 710: for i, az in enumerate(az_t): 711: z_top = neck_z + 0.018 - 0.024 * math.cos(math.radians(az) * 0.5) ** 4 if abs(az) < 90 else neck_z + 0.022 712: for j, t in enumerate(np.linspace(0, 1, nv_t)): 713: zz = z_top * (1 - t) + (hips_z - 0.02) * t 714: pleat = 0.0018 * math.cos(math.radians(az * 12)) 715: tun_g[i, j] = torso_ray(az, zz, lift=0.0055 + pleat) 716: add("arming_tunic", "doublet", _grid_shell_in_blender("Tunic", tun_g, 0.003, 1, cyclic_u=True), "torso_skin", "doublet") 717: 718: # Standing officer collar + gold braid rim 719: az_c = np.linspace(-152, 152, 34) + 180.0 # open slight V at front throat (0 deg) 720: col_g = np.zeros((34, 5, 3)) 721: for i, a_raw in enumerate(np.linspace(26, 334, 34)): 722: az = ((a_raw + 180) % 360) - 180 723: h_col = 0.032 + 0.014 * (abs(az) / 180.0) 724: base_p = torso_ray(az, neck_z - 0.012, lift=0.010, default_r=0.062) 725: d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0]) 726: for j, s in enumerate(np.linspace(0, 1, 5)): 727: col_g[i, j] = base_p + d_out * (0.007 * s ** 1.3) + np.array([0.0, 0.0, h_col * s]) 728: add("officer_collar", "signature", _grid_shell_in_blender("Collar", col_g, 0.0035, 1), "neck_blend", "collar") 729: add("officer_collar_gold", "gold", _curve_pipe_in_blender("CollarGold", col_g[:, -1], 0.0028), "neck_blend", "collar") 730: 731: # 2. Sculpted Steel Gorget + V-Keeled Gothic-Anime Cuirass + 3 Overlapping V-Fauld Lames 732: # 2a. Beveled Steel Gorget around collarbone 733: nu_g = 40 734: gor_g = np.zeros((nu_g, 6, 3)) 735: for i, az in enumerate(np.linspace(-180, 180, nu_g, endpoint=False)): 736: p_in = torso_ray(az, neck_z - 0.018, lift=0.013, default_r=0.066) 737: z_out = uchest_z + 0.062 - 0.028 * max(0.0, math.cos(math.radians(az))) 738: p_out = torso_ray(az, z_out, lift=0.017, default_r=0.112) 739: for j, s in enumerate(np.linspace(0, 1, 6)): 740: gor_g[i, j] = p_in * (1 - s) + p_out * s + np.array([0, 0, 0.003 * math.sin(math.pi * s)]) 741: add("gorget", "steel", _grid_shell_in_blender("Gorget", gor_g, 0.0045, 1, cyclic_u=True), "uchest_blend", "plate") 742: add("gorget_rim", "gold", _curve_pipe_in_blender("GorgetRim", gor_g[:, -1], 0.0032, cyclic=True), "uchest_blend", "plate") 743: 744: # 2b. V-Keeled Gothic Cuirass (nipping sharply into wasp-waist with central ridge keel & diagonal flutes!) 745: nu_c, nv_c = 48, 16 746: cuir_g = np.zeros((nu_c, nv_c, 3)) 747: for i, az in enumerate(np.linspace(-180, 180, nu_c, endpoint=False)): 748: frontness = max(0.0, math.cos(math.radians(az))) 749: arm_dip = 0.048 * math.exp(-((abs(az) - 92.0) / 28.0) ** 2) 750: z_hi = uchest_z + 0.050 - 0.022 * frontness ** 2 - arm_dip 751: z_lo = waist_z - 0.022 * frontness ** 3 # sharp gothic V-point at front waist! 752: for j, t in enumerate(np.linspace(0, 1, nv_c)): 753: zz = z_hi * (1 - t) + z_lo * t 754: # Sharp central V-keel ridge down the front sternum + subtle gothic flutes! 755: keel = 0.014 * max(0.0, 1.0 - abs(az) / 28.0) ** 1.6 * math.sin(math.pi * np.clip(t * 1.1, 0.05, 0.95)) 756: flute = 0.0026 * math.cos(math.radians((abs(az) - 22.0 * t) * 5.0)) * frontness * math.sin(math.pi * t) 757: cuir_g[i, j] = torso_ray(az, zz, lift=0.013 + keel + flute) 758: add("gothic_cuirass", "steel", _grid_shell_in_blender("Cuirass", cuir_g, 0.0055, 1, cyclic_u=True), "torso_plate", "plate") 759: add("cuirass_top_gold", "gold", _curve_pipe_in_blender("CuirTop", cuir_g[:, 0], 0.0032, cyclic=True), "torso_plate", "plate") 760: add("cuirass_waist_gold", "gold", _curve_pipe_in_blender("CuirBot", cuir_g[:, -1], 0.0034, cyclic=True), "torso_plate", "plate") 761: # Central raised gold sternum ridge spine! 762: keel_line = cuir_g[0, 1:-1] + np.array([0.0, 0.0055, 0.0]) 763: add("cuirass_keel_gold", "gold", _curve_pipe_in_blender("CuirKeel", keel_line, 0.0028), "torso_plate", "plate") 764: 765: # 2c. Three Overlapping Articulated V-Fauld Lames below the waist 766: for k_lame in range(3): 767: nu_f = 44 768: fauld_g = np.zeros((nu_f, 4, 3)) 769: z0 = waist_z - 0.008 - k_lame * 0.028 770: for i, az in enumerate(np.linspace(-180, 180, nu_f, endpoint=False)): 771: v_dip = 0.022 * max(0.0, math.cos(math.radians(az))) ** 2 772: flare = 0.016 + k_lame * 0.009 773: for j, s in enumerate(np.linspace(0, 1, 4)): 774: zz = z0 - v_dip - s * 0.032 775: fauld_g[i, j] = torso_ray(az, max(zz, hips_z - 0.06), lift=flare + s * 0.008) 776: fauld_g[i, j, 2] = zz 777: add(f"fauld_lame_{k_lame}", "steel", _grid_shell_in_blender(f"Fauld{k_lame}", fauld_g, 0.004, 1, cyclic_u=True), 778: "hips_stiff", "plate") 779: if k_lame == 2: 780: add("fauld_hem_gold", "gold", _curve_pipe_in_blender("FauldGold", fauld_g[:, -1], 0.0028, cyclic=True), 781: "hips_stiff", "plate") 782: 783: # 3. Split Swallowtail Royal-Indigo Surcoat + Ivory Pleated Under-Kirtle + Scalloped Steel Hip-Tassets 784: # 3a. Ivory pleated under-kirtle (gives luminous light-value contrast between dark indigo surcoat & dark cuisses!) 785: nu_k, nv_k = 56, 12 786: kirt_g = np.zeros((nu_k, nv_k, 3)) 787: z_kirt_top = hips_z + 0.02 788: z_kirt_bot = 0.42 * hips_z + 0.58 * knee_z 789: for i, az in enumerate(np.linspace(-180, 180, nu_k, endpoint=False)): 790: base_w = torso_ray(az, hips_z + 0.01, lift=0.016, default_r=0.145) 791: d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0]) 792: pleat = 0.008 * math.cos(math.radians(az * 18.0)) 793: side_room = 0.032 * math.sin(math.radians(az)) ** 2 794: for j, t in enumerate(np.linspace(0, 1, nv_k)): 795: zz = z_kirt_top * (1 - t) + z_kirt_bot * t 796: bell = (0.115 + side_room) * (t ** 1.12) + pleat * t 797: kirt_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * bell 798: add("ivory_underkirtle", "heraldry", _grid_shell_in_blender("Kirtle", kirt_g, 0.003, 1, cyclic_u=True), 799: "skirt_stiff", "skirt") 800: 801: # 3b. Split Royal-Indigo Swallowtail Surcoat Panels (open front V & side slits, gold piped border!) 802: for p_idx, (az0, az1) in enumerate(((22.0, 162.0), (-162.0, -22.0))): 803: nu_s, nv_s = 22, 14 804: sur_g = np.zeros((nu_s, nv_s, 3)) 805: az_list = np.linspace(az0, az1, nu_s) 806: for i, az in enumerate(az_list): 807: u_norm = i / (nu_s - 1) 808: # Swallowtail V-point longer toward back-hip! 809: z_bot = (0.34 * hips_z + 0.66 * knee_z) - 0.065 * u_norm 810: base_w = torso_ray(az, hips_z + 0.015, lift=0.022, default_r=0.148) 811: d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0]) 812: fold = 0.009 * math.sin(u_norm * math.pi * 4.0) 813: side_room = 0.038 * math.sin(math.radians(az)) ** 2 814: for j, t in enumerate(np.linspace(0, 1, nv_s)): 815: zz = (hips_z + 0.025) * (1 - t) + z_bot * t 816: sur_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.130 + side_room) * (t ** 1.10) + fold * t) 817: add(f"surcoat_panel_{p_idx}", "signature", _grid_shell_in_blender(f"Surcoat{p_idx}", sur_g, 0.004, 1), 818: "skirt_stiff", "skirt") 819: # Gold border piping all along front split, bottom hem, and back slit! 820: border = np.vstack([sur_g[0, :], sur_g[1:, -1], sur_g[-1, -2::-1]]) 821: add(f"surcoat_gold_{p_idx}", "gold", _curve_pipe_in_blender(f"SurGold{p_idx}", border, 0.0030), 822: "skirt_stiff", "skirt") 823: 824: # 3c. Articulated Fluted Steel Hip-Tassets (2 sculpted plates per hip over the surcoat!) 825: for side_nm, sx in (("R", 1.0), ("L", -1.0)): 826: for tl in range(2): 827: nu_ts, nv_ts = 14, 6 828: tas_g = np.zeros((nu_ts, nv_ts, 3)) 829: az_seq = np.linspace(sx * 38.0, sx * 124.0, nu_ts) 830: if sx < 0: 831: az_seq = az_seq[::-1] 832: z_t0 = hips_z + 0.015 - tl * 0.072 833: for i, az in enumerate(az_seq): 834: u_mid = 1.0 - abs(i / (nu_ts - 1) * 2.0 - 1.0) 835: z_t1 = z_t0 - (0.088 + 0.024 * u_mid) 836: base_w = torso_ray(az, hips_z + 0.015, lift=0.028 + tl * 0.010, default_r=0.150) 837: d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0]) 838: flute = 0.004 * math.cos(i * 1.3) 839: for j, s in enumerate(np.linspace(0, 1, nv_ts)): 840: zz = z_t0 * (1 - s) + z_t1 * s 841: tas_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.035 + tl * 0.032) + 0.042 * s + flute) 842: add(f"tasset_{side_nm}_{tl}", "steel", _grid_shell_in_blender(f"Tasset{side_nm}{tl}", tas_g, 0.0045, 1), 843: "skirt_stiff", "plate") 844: rim_pts = np.vstack([tas_g[0, :], tas_g[1:, -1], tas_g[-1, -2::-1]]) 845: add(f"tasset_gold_{side_nm}_{tl}", "gold", _curve_pipe_in_blender(f"TasGold{side_nm}{tl}", rim_pts, 0.0026), 846: "skirt_stiff", "plate") 847: 848: # 4. Crossed Harness Sword-Belt + Sculpted Sunburst Ring Buckle + Hip Rondel Dagger 849: belt_pts = np.array([ 850: torso_ray(az, waist_z - 0.018 - 0.018 * math.sin(math.radians(az)), lift=0.028) 851: for az in np.linspace(-180, 180, 48, endpoint=False) 852: ]) 853: belt_g = np.stack([belt_pts + [0, 0, 0.018], belt_pts - [0, 0, 0.018]], axis=1) 854: add("sword_belt", "leather", _grid_shell_in_blender("SwordBelt", belt_g, 0.005, 1, cyclic_u=True), "hips_stiff", "belt") 855: 856: b_front = torso_ray(0.0, waist_z - 0.018, lift=0.035) 857: bpy.ops.mesh.primitive_torus_add( 858: major_radius=0.022, minor_radius=0.0055, major_segments=20, minor_segments=8, 859: location=tuple(b_front), rotation=(math.radians(90.0), 0.0, 0.0) 860: ) 861: bk_ob = bpy.context.active_object 862: for poly in bk_ob.data.polygons: 863: poly.use_smooth = True 864: add("belt_ring_buckle", "gold", eval_mesh_data(bk_ob, True), "hips_stiff", "belt") 865: bpy.data.objects.remove(bk_ob, do_unlink=True) 866: 867: # Left-hip Gilded Rondel Misericorde Dagger in Scabbard 868: hip_L = torso_ray(-86.0, waist_z - 0.042, lift=0.048) 869: dag_dir = np.array([-0.12, -0.36, -0.92]) 870: dag_dir /= np.linalg.norm(dag_dir) 871: scab_pts = [hip_L + dag_dir * s for s in np.linspace(0.0, 0.25, 8)] 872: add("dagger_scabbard", "leather", _curve_pipe_in_blender("DagScab", scab_pts, 0.011, seg=10), "hips_stiff", "belt") 873: add("dagger_chape", "gold", _curve_pipe_in_blender("DagChape", scab_pts[-3:], 0.0125, seg=10), "hips_stiff", "belt") 874: hilt_pts = [hip_L - dag_dir * s for s in np.linspace(0.0, 0.11, 6)] 875: add("dagger_grip", "gold", _curve_pipe_in_blender("DagGrip", hilt_pts, 0.009, seg=10), "hips_stiff", "belt")read_file{"EndLine":1405,"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","StartLine":1275}
input
{ "EndLine": 1405, "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "StartLine": 1275 }result, 132 lines
Showing lines 1275-1405 of 1457 1275: df = [] 1276: for i in range(nu): 1277: inext = (i + 1) % nu 1278: df.append([0, 1 + i * nv, 1 + inext * nv]) 1279: for j in range(nv - 1): 1280: a, b, c, d = 1 + i * nv + j, 1 + inext * nv + j, 1 + inext * nv + j + 1, 1 + i * nv + j + 1 1281: df.extend([[a, b, c], [a, c, d]]) 1282: d_ob = make_mesh_obj("KorinDome", np.array(dv), np.array(df)) 1283: for poly in d_ob.data.polygons: 1284: poly.use_smooth = True 1285: hair_objs.append(d_ob) 1286: 1287: # Rugged Windswept Spiky Wolf-Cut Locks (32 bold 3D locks!) 1288: # Jagged parted brow spikes 1289: for k, (az0, az1, el_end, flare, wd) in enumerate([ 1290: (14, -4, 78, 0.014, 0.021), 1291: (22, 10, 82, 0.016, 0.019), 1292: (-6, -22, 76, 0.016, 0.020), 1293: (-18, -38, 82, 0.018, 0.022), 1294: (28, 44, 86, 0.019, 0.021), 1295: (-32, -52, 88, 0.019, 0.020), 1296: ]): 1297: pts = [ 1298: skull_pt(az0 * 0.4, 22, 0.018), 1299: skull_pt((az0 + az1) * 0.5, 46, 0.023), 1300: skull_pt(az1, 66, 0.022), 1301: skull_pt(az1, el_end, flare), 1302: ] 1303: hair_objs.append(_add_lock_curve(f"KBang_{k}", pts, wd, 0.48, hc, bev_lock, tap_lock)) 1304: 1305: # Swept-back wild crown & lateral wolf-spikes! 1306: for k, az in enumerate(range(-165, 180, 22)): 1307: if abs(az) < 35: 1308: continue 1309: sgn = 1.0 if az >= 0 else -1.0 1310: pts = [ 1311: skull_pt(az * 0.45, 20, 0.019), 1312: skull_pt(az * 0.85, 50, 0.028), 1313: skull_pt(az + sgn * 8, 82, 0.034), 1314: skull_pt(az + sgn * 14, 108, 0.046) + np.array([sgn * 0.016, -0.018, 0.008]), 1315: ] 1316: hair_objs.append(_add_lock_curve(f"KWolfSpike_{k}", pts, 0.025, 0.52, hc, bev_lock, tap_lock, twist=sgn * 0.2)) 1317: 1318: # Shaggy collar-grazing nape spikes 1319: for k, az in enumerate((-135, -155, -172, 172, 155, 135)): 1320: pts = [ 1321: skull_pt(az, 78, 0.022), 1322: skull_pt(az, 112, 0.028), 1323: skull_pt(az, 138, 0.034) + np.array([0.0, -0.022, -0.048]), 1324: ] 1325: hair_objs.append(_add_lock_curve(f"KNape_{k}", pts, 0.024, 0.50, hc, bev_lock, tap_lock)) 1326: 1327: # Upper crown windswept spikes for jagged top silhouette! 1328: for k, (az, dx, dz) in enumerate(((-40, -0.028, 0.038), (15, 0.018, 0.044), (65, 0.032, 0.034), (145, 0.010, 0.036))): 1329: r0 = skull_pt(az, 28, 0.018) 1330: pts = [r0, r0 + np.array([dx * 0.5, -0.015, dz * 0.7]), r0 + np.array([dx, -0.042, dz])] 1331: hair_objs.append(_add_lock_curve(f"KCrownCrest_{k}", pts, 0.019, 0.50, hc, bev_lock, tap_lock)) 1332: 1333: bpy.ops.object.select_all(action="DESELECT") 1334: for o in hair_objs: 1335: o.select_set(True) 1336: bpy.context.view_layer.objects.active = hair_objs[0] 1337: bpy.ops.object.join() 1338: joined = bpy.context.active_object 1339: 1340: bpy.ops.mesh.primitive_uv_sphere_add(segments=32, ring_count=20, radius=1.0, location=(0, 0, 0)) 1341: prx = bpy.context.active_object 1342: pv = np.empty(len(prx.data.vertices) * 3, dtype=np.float64) 1343: prx.data.vertices.foreach_get("co", pv) 1344: pv = pv.reshape(-1, 3) * np.array([0.14, 0.15, 0.15]) + (hc + np.array([0, -0.01, 0.02])) 1345: prx.data.vertices.foreach_set("co", pv.ravel()) 1346: prx.data.update() 1347: for poly in prx.data.polygons: 1348: poly.use_smooth = True 1349: dt = joined.modifiers.new("KDomeNrm", "DATA_TRANSFER") 1350: dt.object = prx 1351: dt.use_loop_data = True 1352: dt.data_types_loops = {"CUSTOM_NORMAL"} 1353: dt.loop_mapping = "POLYINTERP_NEAREST" 1354: dt.mix_factor = 0.46 1355: h_pos, h_nrm, h_tri = eval_mesh_data(joined, True) 1356: bpy.data.objects.remove(joined, do_unlink=True) 1357: bpy.data.objects.remove(prx, do_unlink=True) 1358: 1359: # Heavy Fluted Northern Steel Pauldrons + Sculpted Fur Shoulder Mantle! 1360: out = [("korin_wolf_hair", "hair", h_pos, h_nrm, h_tri, "head_rigid", "hair")] 1361: B = {k: vrm_to_bl(v) for k, v in bones_vrm.items()} 1362: for side_nm, sx in (("L", -1.0), ("R", 1.0)): 1363: ua = B[f"J_Bip_{side_nm}_UpperArm"] 1364: out_sh = np.array([sx * 0.88, 0.0, 0.48]) 1365: out_sh /= np.linalg.norm(out_sh) 1366: fwd_sh = np.array([0.0, 1.0, 0.0]) 1367: for kl in range(3): 1368: pl_g = np.zeros((16, 5, 3)) 1369: span = 118.0 - kl * 8.0 1370: for i, ua_deg in enumerate(np.linspace(-span, span, 16)): 1371: ur = math.radians(ua_deg) 1372: dp = math.cos(ur) * out_sh + math.sin(ur) * fwd_sh 1373: dp /= np.linalg.norm(dp) 1374: for j, s in enumerate(np.linspace(0, 1, 5)): 1375: cp = ua + np.array([sx * 0.015, 0.0, 0.040 - kl * 0.032 - s * 0.044]) 1376: rp = (0.082 + kl * 0.006 + s * 0.012) * (1.0 + 0.10 * math.cos(ur)) 1377: pl_g[i, j] = cp + dp * rp 1378: if sx < 0: 1379: pl_g = pl_g[::-1] 1380: p_pos, p_nrm, p_tri = _grid_shell_in_blender(f"KPauld{side_nm}{kl}", pl_g, 0.005, 1) 1381: out.append((f"k_pauldron_{side_nm}_{kl}", "steel", p_pos, p_nrm, p_tri, f"pauldron_{side_nm}", "plate")) 1382: if kl == 0: 1383: g_pos, g_nrm, g_tri = _curve_pipe_in_blender(f"KPGold{side_nm}", pl_g[:, -1], 0.0032) 1384: out.append((f"k_pauldron_gold_{side_nm}", "gold", g_pos, g_nrm, g_tri, f"pauldron_{side_nm}", "plate")) 1385: 1386: # Sculpted Dark Fur Shoulder Mantle across upper back & shoulders! 1387: fur_objs = [] 1388: nk_bl = B["J_Bip_C_Neck"] 1389: for i, az in enumerate(np.linspace(-132, 132, 26)): 1390: az_back = 180.0 + az 1391: ar = math.radians(az_back) 1392: d = np.array([math.sin(ar), math.cos(ar), 0.0]) 1393: r0 = nk_bl + np.array([0.0, 0.0, -0.025]) + d * 0.105 1394: pts = [ 1395: r0, 1396: r0 + d * 0.075 + np.array([0.0, 0.0, -0.018]), 1397: r0 + d * 0.145 + np.array([0.0, 0.0, -0.065 - 0.018 * (i % 2)]), 1398: ] 1399: fur_objs.append(_add_lock_curve(f"KFur_{i}", pts, 0.028, 0.65, nk_bl + np.array([0, 0, -0.10]), bev_lock, tap_lock)) 1400: bpy.ops.object.select_all(action="DESELECT") 1401: for o in fur_objs: 1402: o.select_set(True) 1403: bpy.context.view_layer.objects.active = fur_objs[0] 1404: bpy.ops.object.join() 1405: fj = bpy.context.active_object
agent
+1:37:18reasoning
The collision issue between the arming tunic and gorget on the upper chest requires investigation of their positioning. Examining lines 716 and 741 reveals a potential overlap; the arming tunic extends to neck_z + 0.018 creating the penetration.
The intention is to adjust the placement of arming_tunic to avoid overlap.
The arming tunic overlaps the gorget because the tunic extends too far up the torso and the gorget's positioning is insufficient. Adjusting the arming tunic's vertical extent and potentially excluding the "Neck" bone from its weighting will resolve the collision, along with increasing the lift of the gorget and cuirass. Alternatively, I can adjust the gorget and cuirass to clear the arming tunic with increased lift. Zero chest pokethrough is guaranteed by combining both strategies. The positioning of the ivory underkirtle and surcoat panel now requires examination.
Adjusting the surcoat panel lift to 3.5cm ensures separation from the ivory underkirtle; this resolves skirt pokethrough. The dagger scabbard is positioned at the outer-back left hip with a tilt to prevent a vertical placement. Korin's bangs are lowered and refined to frame the forehead and brows with a rugged style while the fur mantle is maintained across the shoulders and upper back. The character build is updated with neutral facial features.
Initial hypothesis: camera focus can be set by reading the head bone world position directly from the GLB model using setupCamera. This suggests the ability to frame the character's face precisely. The camera's configuration parameters (focus, dy, height) are examined to ensure proper framing of Valen's face, hair, shield top, and sword. There may be a need to adjust the height and dy values further.
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # 1. High-Collar Midnight-Indigo Quilted Arming Tunic + Officer Collar with Gold Rim\n nu_t, nv_t = 44, 16\n az_t = np.linspace(-180, 180, nu_t, endpoint=False)\n tun_g = np.zeros((nu_t, nv_t, 3))\n for i, az in enumerate(az_t):\n z_top = uchest_z + 0.042\n for j, t in enumerate(np.linspace(0, 1, nv_t)):\n zz = z_top * (1 - t) + (hips_z - 0.02) * t\n pleat = 0.0012 * math.cos(math.radians(az * 12))\n tun_g[i, j] = torso_ray(az, zz, lift=0.0045 + pleat)\n add(\"arming_tunic\", \"doublet\", _grid_shell_in_blender(\"Tunic\", tun_g, 0.0025, 1, cyclic_u=True), \"torso_skin\", \"doublet\")\n\n # Standing officer collar + gold braid rim\n col_g = np.zeros((34, 5, 3))\n for i, a_raw in enumerate(np.linspace(24, 336, 34)):\n az = ((a_raw + 180) % 360) - 180\n h_col = 0.034 + 0.014 * (abs(az) / 180.0)\n base_p = torso_ray(az, neck_z - 0.016, lift=0.012, default_r=0.062)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n for j, s in enumerate(np.linspace(0, 1, 5)):\n col_g[i, j] = base_p + d_out * (0.007 * s ** 1.3) + np.array([0.0, 0.0, h_col * s])\n add(\"officer_collar\", \"signature\", _grid_shell_in_blender(\"Collar\", col_g, 0.0035, 1), \"neck_blend\", \"collar\")\n add(\"officer_collar_gold\", \"gold\", _curve_pipe_in_blender(\"CollarGold\", col_g[:, -1], 0.0028), \"neck_blend\", \"collar\")\n\n # 2. Sculpted Steel Gorget + V-Keeled Gothic-Anime Cuirass + 3 Overlapping V-Fauld Lames\n # 2a. Beveled Steel Gorget around collarbone\n nu_g = 40\n gor_g = np.zeros((nu_g, 6, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_g, endpoint=False)):\n p_in = torso_ray(az, neck_z - 0.018, lift=0.018, default_r=0.068)\n z_out = uchest_z + 0.060 - 0.026 * max(0.0, math.cos(math.radians(az)))\n p_out = torso_ray(az, z_out, lift=0.024, default_r=0.116)\n for j, s in enumerate(np.linspace(0, 1, 6)):\n gor_g[i, j] = p_in * (1 - s) + p_out * s + np.array([0, 0, 0.004 * math.sin(math.pi * s)])\n add(\"gorget\", \"steel\", _grid_shell_in_blender(\"Gorget\", gor_g, 0.0045, 1, cyclic_u=True), \"uchest_blend\", \"plate\")\n add(\"gorget_rim\", \"gold\", _curve_pipe_in_blender(\"GorgetRim\", gor_g[:, -1], 0.0032, cyclic=True), \"uchest_blend\", \"plate\")\n\n # 2b. V-Keeled Gothic Cuirass (nipping sharply into wasp-waist with central ridge keel & diagonal flutes!)\n nu_c, nv_c = 48, 16\n cuir_g = np.zeros((nu_c, nv_c, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_c, endpoint=False)):\n frontness = max(0.0, math.cos(math.radians(az)))\n arm_dip = 0.048 * math.exp(-((abs(az) - 92.0) / 28.0) ** 2)\n z_hi = uchest_z + 0.050 - 0.022 * frontness ** 2 - arm_dip\n z_lo = waist_z - 0.022 * frontness ** 3 # sharp gothic V-point at front waist!\n for j, t in enumerate(np.linspace(0, 1, nv_c)):\n zz = z_hi * (1 - t) + z_lo * t\n # Sharp central V-keel ridge down the front sternum + subtle gothic flutes!\n keel = 0.015 * max(0.0, 1.0 - abs(az) / 28.0) ** 1.6 * math.sin(math.pi * np.clip(t * 1.1, 0.05, 0.95))\n flute = 0.0026 * math.cos(math.radians((abs(az) - 22.0 * t) * 5.0)) * frontness * math.sin(math.pi * t)\n cuir_g[i, j] = torso_ray(az, zz, lift=0.019 + keel + flute)","Target":" # 1. High-Collar Midnight-Indigo Quilted Arming Tunic + Officer Collar with Gold Rim\n nu_t, nv_t = 44, 16\n az_t = np.linspace(-180, 180, nu_t, endpoint=False)\n tun_g = np.zeros((nu_t, nv_t, 3))\n for i, az in enumerate(az_t):\n z_top = neck_z + 0.018 - 0.024 * math.cos(math.radians(az) * 0.5) ** 4 if abs(az) < 90 else neck_z + 0.022\n for j, t in enumerate(np.linspace(0, 1, nv_t)):\n zz = z_top * (1 - t) + (hips_z - 0.02) * t\n pleat = 0.0018 * math.cos(math.radians(az * 12))\n tun_g[i, j] = torso_ray(az, zz, lift=0.0055 + pleat)\n add(\"arming_tunic\", \"doublet\", _grid_shell_in_blender(\"Tunic\", tun_g, 0.003, 1, cyclic_u=True), \"torso_skin\", \"doublet\")\n\n # Standing officer collar + gold braid rim\n az_c = np.linspace(-152, 152, 34) + 180.0 # open slight V at front throat (0 deg)\n col_g = np.zeros((34, 5, 3))\n for i, a_raw in enumerate(np.linspace(26, 334, 34)):\n az = ((a_raw + 180) % 360) - 180\n h_col = 0.032 + 0.014 * (abs(az) / 180.0)\n base_p = torso_ray(az, neck_z - 0.012, lift=0.010, default_r=0.062)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n for j, s in enumerate(np.linspace(0, 1, 5)):\n col_g[i, j] = base_p + d_out * (0.007 * s ** 1.3) + np.array([0.0, 0.0, h_col * s])\n add(\"officer_collar\", \"signature\", _grid_shell_in_blender(\"Collar\", col_g, 0.0035, 1), \"neck_blend\", \"collar\")\n add(\"officer_collar_gold\", \"gold\", _curve_pipe_in_blender(\"CollarGold\", col_g[:, -1], 0.0028), \"neck_blend\", \"collar\")\n\n # 2. Sculpted Steel Gorget + V-Keeled Gothic-Anime Cuirass + 3 Overlapping V-Fauld Lames\n # 2a. Beveled Steel Gorget around collarbone\n nu_g = 40\n gor_g = np.zeros((nu_g, 6, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_g, endpoint=False)):\n p_in = torso_ray(az, neck_z - 0.018, lift=0.013, default_r=0.066)\n z_out = uchest_z + 0.062 - 0.028 * max(0.0, math.cos(math.radians(az)))\n p_out = torso_ray(az, z_out, lift=0.017, default_r=0.112)\n for j, s in enumerate(np.linspace(0, 1, 6)):\n gor_g[i, j] = p_in * (1 - s) + p_out * s + np.array([0, 0, 0.003 * math.sin(math.pi * s)])\n add(\"gorget\", \"steel\", _grid_shell_in_blender(\"Gorget\", gor_g, 0.0045, 1, cyclic_u=True), \"uchest_blend\", \"plate\")\n add(\"gorget_rim\", \"gold\", _curve_pipe_in_blender(\"GorgetRim\", gor_g[:, -1], 0.0032, cyclic=True), \"uchest_blend\", \"plate\")\n\n # 2b. V-Keeled Gothic Cuirass (nipping sharply into wasp-waist with central ridge keel & diagonal flutes!)\n nu_c, nv_c = 48, 16\n cuir_g = np.zeros((nu_c, nv_c, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_c, endpoint=False)):\n frontness = max(0.0, math.cos(math.radians(az)))\n arm_dip = 0.048 * math.exp(-((abs(az) - 92.0) / 28.0) ** 2)\n z_hi = uchest_z + 0.050 - 0.022 * frontness ** 2 - arm_dip\n z_lo = waist_z - 0.022 * frontness ** 3 # sharp gothic V-point at front waist!\n for j, t in enumerate(np.linspace(0, 1, nv_c)):\n zz = z_hi * (1 - t) + z_lo * t\n # Sharp central V-keel ridge down the front sternum + subtle gothic flutes!\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 28.0) ** 1.6 * math.sin(math.pi * np.clip(t * 1.1, 0.05, 0.95))\n flute = 0.0026 * math.cos(math.radians((abs(az) - 22.0 * t) * 5.0)) * frontness * math.sin(math.pi * t)\n cuir_g[i, j] = torso_ray(az, zz, lift=0.013 + keel + flute)"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # 1. High-Collar Midnight-Indigo Quilted Arming Tunic + Officer Collar with Gold Rim\n nu_t, nv_t = 44, 16\n az_t = np.linspace(-180, 180, nu_t, endpoint=False)\n tun_g = np.zeros((nu_t, nv_t, 3))\n for i, az in enumerate(az_t):\n z_top = uchest_z + 0.042\n for j, t in enumerate(np.linspace(0, 1, nv_t)):\n zz = z_top * (1 - t) + (hips_z - 0.02) * t\n pleat = 0.0012 * math.cos(math.radians(az * 12))\n tun_g[i, j] = torso_ray(az, zz, lift=0.0045 + pleat)\n add(\"arming_tunic\", \"doublet\", _grid_shell_in_blender(\"Tunic\", tun_g, 0.0025, 1, cyclic_u=True), \"torso_skin\", \"doublet\")\n\n # Standing officer collar + gold braid rim\n col_g = np.zeros((34, 5, 3))\n for i, a_raw in enumerate(np.linspace(24, 336, 34)):\n az = ((a_raw + 180) % 360) - 180\n h_col = 0.034 + 0.014 * (abs(az) / 180.0)\n base_p = torso_ray(az, neck_z - 0.016, lift=0.012, default_r=0.062)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n for j, s in enumerate(np.linspace(0, 1, 5)):\n col_g[i, j] = base_p + d_out * (0.007 * s ** 1.3) + np.array([0.0, 0.0, h_col * s])\n add(\"officer_collar\", \"signature\", _grid_shell_in_blender(\"Collar\", col_g, 0.0035, 1), \"neck_blend\", \"collar\")\n add(\"officer_collar_gold\", \"gold\", _curve_pipe_in_blender(\"CollarGold\", col_g[:, -1], 0.0028), \"neck_blend\", \"collar\")\n\n # 2. Sculpted Steel Gorget + V-Keeled Gothic-Anime Cuirass + 3 Overlapping V-Fauld Lames\n # 2a. Beveled Steel Gorget around collarbone\n nu_g = 40\n gor_g = np.zeros((nu_g, 6, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_g, endpoint=False)):\n p_in = torso_ray(az, neck_z - 0.018, lift=0.018, default_r=0.068)\n z_out = uchest_z + 0.060 - 0.026 * max(0.0, math.cos(math.radians(az)))\n p_out = torso_ray(az, z_out, lift=0.024, default_r=0.116)\n for j, s in enumerate(np.linspace(0, 1, 6)):\n gor_g[i, j] = p_in * (1 - s) + p_out * s + np.array([0, 0, 0.004 * math.sin(math.pi * s)])\n add(\"gorget\", \"steel\", _grid_shell_in_blender(\"Gorget\", gor_g, 0.0045, 1, cyclic_u=True), \"uchest_blend\", \"plate\")\n add(\"gorget_rim\", \"gold\", _curve_pipe_in_blender(\"GorgetRim\", gor_g[:, -1], 0.0032, cyclic=True), \"uchest_blend\", \"plate\")\n\n # 2b. V-Keeled Gothic Cuirass (nipping sharply into wasp-waist with central ridge keel & diagonal flutes!)\n nu_c, nv_c = 48, 16\n cuir_g = np.zeros((nu_c, nv_c, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_c, endpoint=False)):\n frontness = max(0.0, math.cos(math.radians(az)))\n arm_dip = 0.048 * math.exp(-((abs(az) - 92.0) / 28.0) ** 2)\n z_hi = uchest_z + 0.050 - 0.022 * frontness ** 2 - arm_dip\n z_lo = waist_z - 0.022 * frontness ** 3 # sharp gothic V-point at front waist!\n for j, t in enumerate(np.linspace(0, 1, nv_c)):\n zz = z_hi * (1 - t) + z_lo * t\n # Sharp central V-keel ridge down the front sternum + subtle gothic flutes!\n keel = 0.015 * max(0.0, 1.0 - abs(az) / 28.0) ** 1.6 * math.sin(math.pi * np.clip(t * 1.1, 0.05, 0.95))\n flute = 0.0026 * math.cos(math.radians((abs(az) - 22.0 * t) * 5.0)) * frontness * math.sin(math.pi * t)\n cuir_g[i, j] = torso_ray(az, zz, lift=0.019 + keel + flute)", "Target": " # 1. High-Collar Midnight-Indigo Quilted Arming Tunic + Officer Collar with Gold Rim\n nu_t, nv_t = 44, 16\n az_t = np.linspace(-180, 180, nu_t, endpoint=False)\n tun_g = np.zeros((nu_t, nv_t, 3))\n for i, az in enumerate(az_t):\n z_top = neck_z + 0.018 - 0.024 * math.cos(math.radians(az) * 0.5) ** 4 if abs(az) < 90 else neck_z + 0.022\n for j, t in enumerate(np.linspace(0, 1, nv_t)):\n zz = z_top * (1 - t) + (hips_z - 0.02) * t\n pleat = 0.0018 * math.cos(math.radians(az * 12))\n tun_g[i, j] = torso_ray(az, zz, lift=0.0055 + pleat)\n add(\"arming_tunic\", \"doublet\", _grid_shell_in_blender(\"Tunic\", tun_g, 0.003, 1, cyclic_u=True), \"torso_skin\", \"doublet\")\n\n # Standing officer collar + gold braid rim\n az_c = np.linspace(-152, 152, 34) + 180.0 # open slight V at front throat (0 deg)\n col_g = np.zeros((34, 5, 3))\n for i, a_raw in enumerate(np.linspace(26, 334, 34)):\n az = ((a_raw + 180) % 360) - 180\n h_col = 0.032 + 0.014 * (abs(az) / 180.0)\n base_p = torso_ray(az, neck_z - 0.012, lift=0.010, default_r=0.062)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n for j, s in enumerate(np.linspace(0, 1, 5)):\n col_g[i, j] = base_p + d_out * (0.007 * s ** 1.3) + np.array([0.0, 0.0, h_col * s])\n add(\"officer_collar\", \"signature\", _grid_shell_in_blender(\"Collar\", col_g, 0.0035, 1), \"neck_blend\", \"collar\")\n add(\"officer_collar_gold\", \"gold\", _curve_pipe_in_blender(\"CollarGold\", col_g[:, -1], 0.0028), \"neck_blend\", \"collar\")\n\n # 2. Sculpted Steel Gorget + V-Keeled Gothic-Anime Cuirass + 3 Overlapping V-Fauld Lames\n # 2a. Beveled Steel Gorget around collarbone\n nu_g = 40\n gor_g = np.zeros((nu_g, 6, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_g, endpoint=False)):\n p_in = torso_ray(az, neck_z - 0.018, lift=0.013, default_r=0.066)\n z_out = uchest_z + 0.062 - 0.028 * max(0.0, math.cos(math.radians(az)))\n p_out = torso_ray(az, z_out, lift=0.017, default_r=0.112)\n for j, s in enumerate(np.linspace(0, 1, 6)):\n gor_g[i, j] = p_in * (1 - s) + p_out * s + np.array([0, 0, 0.003 * math.sin(math.pi * s)])\n add(\"gorget\", \"steel\", _grid_shell_in_blender(\"Gorget\", gor_g, 0.0045, 1, cyclic_u=True), \"uchest_blend\", \"plate\")\n add(\"gorget_rim\", \"gold\", _curve_pipe_in_blender(\"GorgetRim\", gor_g[:, -1], 0.0032, cyclic=True), \"uchest_blend\", \"plate\")\n\n # 2b. V-Keeled Gothic Cuirass (nipping sharply into wasp-waist with central ridge keel & diagonal flutes!)\n nu_c, nv_c = 48, 16\n cuir_g = np.zeros((nu_c, nv_c, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_c, endpoint=False)):\n frontness = max(0.0, math.cos(math.radians(az)))\n arm_dip = 0.048 * math.exp(-((abs(az) - 92.0) / 28.0) ** 2)\n z_hi = uchest_z + 0.050 - 0.022 * frontness ** 2 - arm_dip\n z_lo = waist_z - 0.022 * frontness ** 3 # sharp gothic V-point at front waist!\n for j, t in enumerate(np.linspace(0, 1, nv_c)):\n zz = z_hi * (1 - t) + z_lo * t\n # Sharp central V-keel ridge down the front sternum + subtle gothic flutes!\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 28.0) ** 1.6 * math.sin(math.pi * np.clip(t * 1.1, 0.05, 0.95))\n flute = 0.0026 * math.cos(math.radians((abs(az) - 22.0 * t) * 5.0)) * frontness * math.sin(math.pi * t)\n cuir_g[i, j] = torso_ray(az, zz, lift=0.013 + keel + flute)" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 706 (+13/-14 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # 3a. Ivory pleated under-kirtle (gives luminous light-value contrast between dark indigo surcoat & dark cuisses!)\n nu_k, nv_k = 56, 12\n kirt_g = np.zeros((nu_k, nv_k, 3))\n z_kirt_top = hips_z + 0.02\n z_kirt_bot = 0.42 * hips_z + 0.58 * knee_z\n for i, az in enumerate(np.linspace(-180, 180, nu_k, endpoint=False)):\n base_w = torso_ray(az, hips_z + 0.01, lift=0.012, default_r=0.142)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n pleat = 0.005 * math.cos(math.radians(az * 18.0))\n side_room = 0.024 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_k)):\n zz = z_kirt_top * (1 - t) + z_kirt_bot * t\n bell = (0.094 + side_room) * (t ** 1.12) + pleat * t\n kirt_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * bell\n add(\"ivory_underkirtle\", \"heraldry\", _grid_shell_in_blender(\"Kirtle\", kirt_g, 0.003, 1, cyclic_u=True),\n \"skirt_stiff\", \"skirt\")\n\n # 3b. Split Royal-Indigo Swallowtail Surcoat Panels (open front V & side slits, gold piped border!)\n for p_idx, (az0, az1) in enumerate(((22.0, 162.0), (-162.0, -22.0))):\n nu_s, nv_s = 22, 14\n sur_g = np.zeros((nu_s, nv_s, 3))\n az_list = np.linspace(az0, az1, nu_s)\n for i, az in enumerate(az_list):\n u_norm = i / (nu_s - 1)\n # Swallowtail V-point longer toward back-hip!\n z_bot = (0.34 * hips_z + 0.66 * knee_z) - 0.065 * u_norm\n base_w = torso_ray(az, hips_z + 0.015, lift=0.026, default_r=0.148)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n fold = 0.006 * math.sin(u_norm * math.pi * 4.0)\n side_room = 0.038 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_s)):\n zz = (hips_z + 0.025) * (1 - t) + z_bot * t\n sur_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.142 + side_room) * (t ** 1.08) + fold * t)","Target":" # 3a. Ivory pleated under-kirtle (gives luminous light-value contrast between dark indigo surcoat & dark cuisses!)\n nu_k, nv_k = 56, 12\n kirt_g = np.zeros((nu_k, nv_k, 3))\n z_kirt_top = hips_z + 0.02\n z_kirt_bot = 0.42 * hips_z + 0.58 * knee_z\n for i, az in enumerate(np.linspace(-180, 180, nu_k, endpoint=False)):\n base_w = torso_ray(az, hips_z + 0.01, lift=0.016, default_r=0.145)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n pleat = 0.008 * math.cos(math.radians(az * 18.0))\n side_room = 0.032 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_k)):\n zz = z_kirt_top * (1 - t) + z_kirt_bot * t\n bell = (0.115 + side_room) * (t ** 1.12) + pleat * t\n kirt_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * bell\n add(\"ivory_underkirtle\", \"heraldry\", _grid_shell_in_blender(\"Kirtle\", kirt_g, 0.003, 1, cyclic_u=True),\n \"skirt_stiff\", \"skirt\")\n\n # 3b. Split Royal-Indigo Swallowtail Surcoat Panels (open front V & side slits, gold piped border!)\n for p_idx, (az0, az1) in enumerate(((22.0, 162.0), (-162.0, -22.0))):\n nu_s, nv_s = 22, 14\n sur_g = np.zeros((nu_s, nv_s, 3))\n az_list = np.linspace(az0, az1, nu_s)\n for i, az in enumerate(az_list):\n u_norm = i / (nu_s - 1)\n # Swallowtail V-point longer toward back-hip!\n z_bot = (0.34 * hips_z + 0.66 * knee_z) - 0.065 * u_norm\n base_w = torso_ray(az, hips_z + 0.015, lift=0.022, default_r=0.148)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n fold = 0.009 * math.sin(u_norm * math.pi * 4.0)\n side_room = 0.038 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_s)):\n zz = (hips_z + 0.025) * (1 - t) + z_bot * t\n sur_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.130 + side_room) * (t ** 1.10) + fold * t)"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # 3a. Ivory pleated under-kirtle (gives luminous light-value contrast between dark indigo surcoat & dark cuisses!)\n nu_k, nv_k = 56, 12\n kirt_g = np.zeros((nu_k, nv_k, 3))\n z_kirt_top = hips_z + 0.02\n z_kirt_bot = 0.42 * hips_z + 0.58 * knee_z\n for i, az in enumerate(np.linspace(-180, 180, nu_k, endpoint=False)):\n base_w = torso_ray(az, hips_z + 0.01, lift=0.012, default_r=0.142)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n pleat = 0.005 * math.cos(math.radians(az * 18.0))\n side_room = 0.024 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_k)):\n zz = z_kirt_top * (1 - t) + z_kirt_bot * t\n bell = (0.094 + side_room) * (t ** 1.12) + pleat * t\n kirt_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * bell\n add(\"ivory_underkirtle\", \"heraldry\", _grid_shell_in_blender(\"Kirtle\", kirt_g, 0.003, 1, cyclic_u=True),\n \"skirt_stiff\", \"skirt\")\n\n # 3b. Split Royal-Indigo Swallowtail Surcoat Panels (open front V & side slits, gold piped border!)\n for p_idx, (az0, az1) in enumerate(((22.0, 162.0), (-162.0, -22.0))):\n nu_s, nv_s = 22, 14\n sur_g = np.zeros((nu_s, nv_s, 3))\n az_list = np.linspace(az0, az1, nu_s)\n for i, az in enumerate(az_list):\n u_norm = i / (nu_s - 1)\n # Swallowtail V-point longer toward back-hip!\n z_bot = (0.34 * hips_z + 0.66 * knee_z) - 0.065 * u_norm\n base_w = torso_ray(az, hips_z + 0.015, lift=0.026, default_r=0.148)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n fold = 0.006 * math.sin(u_norm * math.pi * 4.0)\n side_room = 0.038 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_s)):\n zz = (hips_z + 0.025) * (1 - t) + z_bot * t\n sur_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.142 + side_room) * (t ** 1.08) + fold * t)", "Target": " # 3a. Ivory pleated under-kirtle (gives luminous light-value contrast between dark indigo surcoat & dark cuisses!)\n nu_k, nv_k = 56, 12\n kirt_g = np.zeros((nu_k, nv_k, 3))\n z_kirt_top = hips_z + 0.02\n z_kirt_bot = 0.42 * hips_z + 0.58 * knee_z\n for i, az in enumerate(np.linspace(-180, 180, nu_k, endpoint=False)):\n base_w = torso_ray(az, hips_z + 0.01, lift=0.016, default_r=0.145)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n pleat = 0.008 * math.cos(math.radians(az * 18.0))\n side_room = 0.032 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_k)):\n zz = z_kirt_top * (1 - t) + z_kirt_bot * t\n bell = (0.115 + side_room) * (t ** 1.12) + pleat * t\n kirt_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * bell\n add(\"ivory_underkirtle\", \"heraldry\", _grid_shell_in_blender(\"Kirtle\", kirt_g, 0.003, 1, cyclic_u=True),\n \"skirt_stiff\", \"skirt\")\n\n # 3b. Split Royal-Indigo Swallowtail Surcoat Panels (open front V & side slits, gold piped border!)\n for p_idx, (az0, az1) in enumerate(((22.0, 162.0), (-162.0, -22.0))):\n nu_s, nv_s = 22, 14\n sur_g = np.zeros((nu_s, nv_s, 3))\n az_list = np.linspace(az0, az1, nu_s)\n for i, az in enumerate(az_list):\n u_norm = i / (nu_s - 1)\n # Swallowtail V-point longer toward back-hip!\n z_bot = (0.34 * hips_z + 0.66 * knee_z) - 0.065 * u_norm\n base_w = torso_ray(az, hips_z + 0.015, lift=0.022, default_r=0.148)\n d_out = np.array([math.sin(math.radians(az)), math.cos(math.radians(az)), 0.0])\n fold = 0.009 * math.sin(u_norm * math.pi * 4.0)\n side_room = 0.038 * math.sin(math.radians(az)) ** 2\n for j, t in enumerate(np.linspace(0, 1, nv_s)):\n zz = (hips_z + 0.025) * (1 - t) + z_bot * t\n sur_g[i, j] = np.array([base_w[0], base_w[1], zz]) + d_out * ((0.130 + side_room) * (t ** 1.10) + fold * t)" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 783 (+8/-8 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # Left-hip Gilded Rondel Misericorde Dagger in Scabbard (angled rakishly along outer-back hip)\n hip_L = torso_ray(-104.0, waist_z - 0.048, lift=0.052)\n dag_dir = np.array([-0.16, -0.78, -0.60])\n dag_dir /= np.linalg.norm(dag_dir)\n scab_pts = [hip_L + dag_dir * s for s in np.linspace(0.0, 0.24, 8)]\n add(\"dagger_scabbard\", \"leather\", _curve_pipe_in_blender(\"DagScab\", scab_pts, 0.010, seg=10), \"hips_stiff\", \"belt\")\n add(\"dagger_chape\", \"gold\", _curve_pipe_in_blender(\"DagChape\", scab_pts[-3:], 0.0115, seg=10), \"hips_stiff\", \"belt\")\n hilt_pts = [hip_L - dag_dir * s for s in np.linspace(0.0, 0.09, 6)]\n add(\"dagger_grip\", \"gold\", _curve_pipe_in_blender(\"DagGrip\", hilt_pts, 0.0085, seg=10), \"hips_stiff\", \"belt\")","Target":" # Left-hip Gilded Rondel Misericorde Dagger in Scabbard\n hip_L = torso_ray(-86.0, waist_z - 0.042, lift=0.048)\n dag_dir = np.array([-0.12, -0.36, -0.92])\n dag_dir /= np.linalg.norm(dag_dir)\n scab_pts = [hip_L + dag_dir * s for s in np.linspace(0.0, 0.25, 8)]\n add(\"dagger_scabbard\", \"leather\", _curve_pipe_in_blender(\"DagScab\", scab_pts, 0.011, seg=10), \"hips_stiff\", \"belt\")\n add(\"dagger_chape\", \"gold\", _curve_pipe_in_blender(\"DagChape\", scab_pts[-3:], 0.0125, seg=10), \"hips_stiff\", \"belt\")\n hilt_pts = [hip_L - dag_dir * s for s in np.linspace(0.0, 0.11, 6)]\n add(\"dagger_grip\", \"gold\", _curve_pipe_in_blender(\"DagGrip\", hilt_pts, 0.009, seg=10), \"hips_stiff\", \"belt\")"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # Left-hip Gilded Rondel Misericorde Dagger in Scabbard (angled rakishly along outer-back hip)\n hip_L = torso_ray(-104.0, waist_z - 0.048, lift=0.052)\n dag_dir = np.array([-0.16, -0.78, -0.60])\n dag_dir /= np.linalg.norm(dag_dir)\n scab_pts = [hip_L + dag_dir * s for s in np.linspace(0.0, 0.24, 8)]\n add(\"dagger_scabbard\", \"leather\", _curve_pipe_in_blender(\"DagScab\", scab_pts, 0.010, seg=10), \"hips_stiff\", \"belt\")\n add(\"dagger_chape\", \"gold\", _curve_pipe_in_blender(\"DagChape\", scab_pts[-3:], 0.0115, seg=10), \"hips_stiff\", \"belt\")\n hilt_pts = [hip_L - dag_dir * s for s in np.linspace(0.0, 0.09, 6)]\n add(\"dagger_grip\", \"gold\", _curve_pipe_in_blender(\"DagGrip\", hilt_pts, 0.0085, seg=10), \"hips_stiff\", \"belt\")", "Target": " # Left-hip Gilded Rondel Misericorde Dagger in Scabbard\n hip_L = torso_ray(-86.0, waist_z - 0.042, lift=0.048)\n dag_dir = np.array([-0.12, -0.36, -0.92])\n dag_dir /= np.linalg.norm(dag_dir)\n scab_pts = [hip_L + dag_dir * s for s in np.linspace(0.0, 0.25, 8)]\n add(\"dagger_scabbard\", \"leather\", _curve_pipe_in_blender(\"DagScab\", scab_pts, 0.011, seg=10), \"hips_stiff\", \"belt\")\n add(\"dagger_chape\", \"gold\", _curve_pipe_in_blender(\"DagChape\", scab_pts[-3:], 0.0125, seg=10), \"hips_stiff\", \"belt\")\n hilt_pts = [hip_L - dag_dir * s for s in np.linspace(0.0, 0.11, 6)]\n add(\"dagger_grip\", \"gold\", _curve_pipe_in_blender(\"DagGrip\", hilt_pts, 0.009, seg=10), \"hips_stiff\", \"belt\")" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 866 (+8/-8 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # Rugged Windswept Spiky Wolf-Cut Locks (34 bold 3D locks framing brow & temples!)\n for k, (az0, az1, el_end, flare, wd) in enumerate([\n (10, -2, 92, 0.012, 0.022),\n (18, 8, 95, 0.013, 0.020),\n (26, 20, 96, 0.014, 0.021),\n (-4, -15, 91, 0.012, 0.021),\n (-14, -28, 95, 0.014, 0.022),\n (-24, -40, 98, 0.016, 0.022),\n (32, 48, 102, 0.018, 0.023),\n (-36, -54, 102, 0.018, 0.023),\n ]):\n pts = [\n skull_pt(az0 * 0.4, 22, 0.018),\n skull_pt((az0 + az1) * 0.5, 48, 0.022),\n skull_pt(az1, 72, 0.020),\n skull_pt(az1, el_end, flare),\n ]\n hair_objs.append(_add_lock_curve(f\"KBang_{k}\", pts, wd, 0.48, hc, bev_lock, tap_lock))","Target":" # Rugged Windswept Spiky Wolf-Cut Locks (32 bold 3D locks!)\n # Jagged parted brow spikes\n for k, (az0, az1, el_end, flare, wd) in enumerate([\n (14, -4, 78, 0.014, 0.021),\n (22, 10, 82, 0.016, 0.019),\n (-6, -22, 76, 0.016, 0.020),\n (-18, -38, 82, 0.018, 0.022),\n (28, 44, 86, 0.019, 0.021),\n (-32, -52, 88, 0.019, 0.020),\n ]):\n pts = [\n skull_pt(az0 * 0.4, 22, 0.018),\n skull_pt((az0 + az1) * 0.5, 46, 0.023),\n skull_pt(az1, 66, 0.022),\n skull_pt(az1, el_end, flare),\n ]\n hair_objs.append(_add_lock_curve(f\"KBang_{k}\", pts, wd, 0.48, hc, bev_lock, tap_lock))"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # Rugged Windswept Spiky Wolf-Cut Locks (34 bold 3D locks framing brow & temples!)\n for k, (az0, az1, el_end, flare, wd) in enumerate([\n (10, -2, 92, 0.012, 0.022),\n (18, 8, 95, 0.013, 0.020),\n (26, 20, 96, 0.014, 0.021),\n (-4, -15, 91, 0.012, 0.021),\n (-14, -28, 95, 0.014, 0.022),\n (-24, -40, 98, 0.016, 0.022),\n (32, 48, 102, 0.018, 0.023),\n (-36, -54, 102, 0.018, 0.023),\n ]):\n pts = [\n skull_pt(az0 * 0.4, 22, 0.018),\n skull_pt((az0 + az1) * 0.5, 48, 0.022),\n skull_pt(az1, 72, 0.020),\n skull_pt(az1, el_end, flare),\n ]\n hair_objs.append(_add_lock_curve(f\"KBang_{k}\", pts, wd, 0.48, hc, bev_lock, tap_lock))", "Target": " # Rugged Windswept Spiky Wolf-Cut Locks (32 bold 3D locks!)\n # Jagged parted brow spikes\n for k, (az0, az1, el_end, flare, wd) in enumerate([\n (14, -4, 78, 0.014, 0.021),\n (22, 10, 82, 0.016, 0.019),\n (-6, -22, 76, 0.016, 0.020),\n (-18, -38, 82, 0.018, 0.022),\n (28, 44, 86, 0.019, 0.021),\n (-32, -52, 88, 0.019, 0.020),\n ]):\n pts = [\n skull_pt(az0 * 0.4, 22, 0.018),\n skull_pt((az0 + az1) * 0.5, 46, 0.023),\n skull_pt(az1, 66, 0.022),\n skull_pt(az1, el_end, flare),\n ]\n hair_objs.append(_add_lock_curve(f\"KBang_{k}\", pts, wd, 0.48, hc, bev_lock, tap_lock))" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 1286 (+11/-10 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # Sculpted Dark Fur Shoulder Mantle across upper back & shoulders (clear of front throat)!\n fur_objs = []\n nk_bl = B[\"J_Bip_C_Neck\"]\n for i, az in enumerate(np.linspace(-98, 98, 22)):","Target":" # Sculpted Dark Fur Shoulder Mantle across upper back & shoulders!\n fur_objs = []\n nk_bl = B[\"J_Bip_C_Neck\"]\n for i, az in enumerate(np.linspace(-132, 132, 26)):"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # Sculpted Dark Fur Shoulder Mantle across upper back & shoulders (clear of front throat)!\n fur_objs = []\n nk_bl = B[\"J_Bip_C_Neck\"]\n for i, az in enumerate(np.linspace(-98, 98, 22)):", "Target": " # Sculpted Dark Fur Shoulder Mantle across upper back & shoulders!\n fur_objs = []\n nk_bl = B[\"J_Bip_C_Neck\"]\n for i, az in enumerate(np.linspace(-132, 132, 26)):" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 1386 (+2/-2 lines).
agent
+1:38:42reasoning
Applying updates to tools/build_adversarial.py to exclude "Neck" from torso_skin and include "Spine," "Chest," and "UpperChest."
Also applying updates to review/slice/index.html as the second update.
I'm thinking through how to approach this.
Correcting the adversarial build, the goal is to prevent the arming tunic from twisting into the gorget by applying specific skin triangle drops on Valen's body. Adjustments are also applied to Korin's build to match the face anatomy from Pass 1, avoiding face stacking.
Furthermore, camera parameters were changed in q_base to focus on Valen's head, and adjustments made to review/slice/index.html to center the camera on the head when the focus is set to "head" and the character possesses the necessary head bone.
read_file{"EndLine":320,"Path":"~/work/lowmarch/tools/build_adversarial.py","StartLine":255}
input
{ "EndLine": 320, "Path": "~/work/lowmarch/tools/build_adversarial.py", "StartLine": 255 }result, 67 lines
Showing lines 255-320 of 873 255: 256: bust_pose = P.merge(P.BUST, P.fist("R"), P.fist("L")) 257: return { 258: "battle_guard": [(0.0, guard), (1.0, guard)], 259: "idle_breath_12fps": idle_keys, 260: "strike_combo_12fps": strike_keys, 261: "bust_ref": [(0.0, bust_pose), (1.0, bust_pose)], 262: } 263: 264: 265: # --------------------------------------------------------------------------- 266: # 3. Bind Blender 5.2 Sculpted Pieces onto Lowmarch's Skeleton 267: # --------------------------------------------------------------------------- 268: def bind_blender_piece(fit, nm, role, pos, nrm, tri, bind_tag, grp): 269: pc = dict( 270: mesh="outfit", 271: material=f"OUTFIT_{nm}", 272: mi=-1, 273: role=role, 274: pos=pos.astype(np.float64), 275: nrm=nrm.astype(np.float64), 276: uv=np.zeros((len(pos), 2), dtype=np.float64), 277: tri=tri.astype(np.int32), 278: group=grp, 279: ) 280: if bind_tag == "head_rigid": 281: fit.bind(pc, rigid="J_Bip_C_Head") 282: elif bind_tag == "ponytail_blend": 283: fit.bind(pc, blend={"J_Bip_C_Head": 0.80, "J_Bip_C_Neck": 0.14, "J_Bip_C_UpperChest": 0.06}) 284: elif bind_tag == "torso_skin": 285: fit.bind(pc, allow=("Spine", "Chest", "UpperChest", "Neck", "Hips"), fallback="J_Bip_C_Chest") 286: elif bind_tag == "neck_blend": 287: fit.bind(pc, blend={"J_Bip_C_Neck": 0.65, "J_Bip_C_UpperChest": 0.35}) 288: elif bind_tag == "uchest_blend": 289: fit.bind(pc, rigid="J_Bip_C_UpperChest") 290: elif bind_tag == "torso_plate": 291: fit.bind(pc, allow=("Spine", "Chest", "UpperChest"), fallback="J_Bip_C_Chest") 292: stiffen(pc, fit, "J_Bip_C_Chest", share=0.55) 293: elif bind_tag == "hips_stiff": 294: fit.bind(pc, rigid="J_Bip_C_Hips") 295: elif bind_tag == "skirt_stiff": 296: if nm.startswith("tasset_"): 297: side = "R" if "_R_" in nm else "L" 298: fit.bind(pc, blend={f"J_Bip_{side}_UpperLeg": 0.56, "J_Bip_C_Hips": 0.44}) 299: else: 300: fit.bind(pc, allow=("Hips", "UpperLeg"), fallback="J_Bip_C_Hips") 301: stiffen(pc, fit, "J_Bip_C_Hips", share=0.46) 302: elif bind_tag.startswith("uarm_"): 303: side = bind_tag[-1] 304: fit.bind(pc, rigid=f"J_Bip_{side}_UpperArm") 305: elif bind_tag.startswith("pauldron_"): 306: side = bind_tag[-1] 307: fit.bind(pc, blend={f"J_Bip_{side}_UpperArm": 0.50, f"J_Bip_{side}_Shoulder": 0.32, "J_Bip_C_UpperChest": 0.18}) 308: elif bind_tag.startswith("larm_"): 309: if bind_tag == "larm_rigid": 310: fit.bind(pc, rigid="J_Bip_L_LowerArm") 311: else: 312: side = bind_tag[-1] 313: fit.bind(pc, rigid=f"J_Bip_{side}_LowerArm") 314: elif bind_tag.startswith("hand_"): 315: side = bind_tag[-1] 316: fit.bind(pc, rigid=f"J_Bip_{side}_Hand") 317: elif bind_tag.startswith("leg_skin_"): 318: side = bind_tag[-1] 319: fit.bind(pc, allow=("Hips", f"{side}_UpperLeg", f"{side}_LowerLeg", f"{side}_Foot"), 320: fallback=f"J_Bip_{side}_LowerLeg")read_file{"EndLine":600,"Path":"~/work/lowmarch/tools/build_adversarial.py","StartLine":510}
input
{ "EndLine": 600, "Path": "~/work/lowmarch/tools/build_adversarial.py", "StartLine": 510 }result, 92 lines
Showing lines 510-600 of 873 510: orig = p.v.material_texture(pr["mi"]) 511: if orig is not None: 512: pr["custom_tex"] = paint_anime_highlight_rgba(orig) 513: timings["valen_tex_and_mask_s"] = round(time.time() - t_tex0, 2) 514: 515: valen_colors = { 516: "r": "#15254a", "s": "#3264b0", "t": "#8ad4ff", 517: "A": "#58483c", "o": "#22181a", 518: } 519: valen_paint = { 520: "skin": "#f7dfd3", 521: "hair": "#e3d3ba", # Pale champagne-platinum Valkyrie locks 522: "signature": "#1f325c", # Royal midnight-indigo surcoat, collar, shield, sleeves 523: "cape": "#1f325c", # Indigo outer cloak (lining added in scene_info below) 524: "doublet": "#222534", 525: "heraldry": "#ece6d8", # Luminous warm ivory pleated under-kirtle 526: "steel": "#c2cad8", # Fluted mirror-bright gothic steel 527: "gold": "#d4a64a", # Burnished antique gold filigree & crests 528: "leather": "#4e3122", 529: "glove": "#36231b", 530: "boot": "#301f18", 531: "wood": "#6b482e", 532: } 533: p.paint = dict(valen_paint) 534: pal = dict(vp.PALETTE, **valen_colors) 535: 536: info = export_glb.scene_info(p, pal) 537: # Propagate two-sided cape lining into scene_info paint metadata 538: info["paint"]["cape"] = {"kind": "cloth", "base": "#1f325c", "lining": "#8e1e2e"} 539: 540: # Export standalone rigged multi-clip GLB to ~/out/valen_finished.glb! 541: t_exp0 = time.time() 542: os.makedirs("~/out", exist_ok=True) 543: standalone_glb = "~/out/valen_finished.glb" 544: glb_bytes = export_glb.export_skinned( 545: p, 546: pal, 547: standalone_glb, 548: clips=clips, 549: max_tex=1024, 550: extras=info, 551: step_clips=("idle_breath_12fps", "strike_combo_12fps"), 552: ) 553: os.chmod(standalone_glb, 0o644) 554: timings["export_glb_s"] = round(time.time() - t_exp0, 2) 555: timings["glb_size_bytes"] = int(glb_bytes) 556: 557: # Also write scene copy for review/out/slice_after 558: os.makedirs(ADV_OUT_DIR, exist_ok=True) 559: slice_glb = os.path.join(ADV_OUT_DIR, "valen.glb") 560: shutil.copyfile(standalone_glb, slice_glb) 561: bs.wrap_glb_json(slice_glb) 562: # Also copy raw valen_finished.glb into ADV_OUT_DIR so ?glb=valen_finished.glb serves cleanly over localhost HTTP! 563: shutil.copyfile(standalone_glb, os.path.join(ADV_OUT_DIR, "valen_finished.glb")) 564: 565: timings["valen_total_s"] = round(time.time() - t_start, 2) 566: return dict( 567: name="valen", 568: label="Valen (Valkyrie Marshal)", 569: place={"pos": [-0.74, 0.0, 0.04], "yaw": 32.0}, 570: clip="battle_guard", 571: clip_t=0.0, 572: wind=-3.2, 573: info=info, 574: ), p, clips 575: 576: 577: def build_korin_adversarial(timings): 578: """Upgrade Korin so zero VRoid hair cards remain anywhere in the After battle scene!""" 579: t0 = time.time() 580: vrm_path = bs.cached_cage_vrm("arm_m_strong") 581: v0 = vp.VRM(vrm_path) 582: shape = { 583: **vp.NEUTRAL, 584: **G.shape("stocky", "veteran", blush=0.0, face_normals=0.0, hair_normals=0.0, shadow_cards=0.0), 585: } 586: shape["arm_out"] = bs.arm_room(v0, shape) 587: clips = {"idle": bs.housecarl_pose(v0, shape)} 588: 589: morphs = {"Fcl_BRW_Angry": 0.48, "Fcl_EYE_Angry": 0.22} 590: pose_ref = vp.bone_pose(v0, shape, vp.BUST_POSE) 591: raw_prims = v0.primitives(morphs, pose_ref) 592: raw_roles = [vp.role_of(pr["material"]) for pr in raw_prims] 593: lm_k = vp.landmarks(raw_prims, raw_roles) 594: fit_k = O.Fit(v0, pose_ref, raw_prims, raw_roles) 595: bp_k = [pr for pr, rl in zip(raw_prims, raw_roles) if rl == "body"][0] 596: fp_k = [pr for pr, rl in zip(raw_prims, raw_roles) if rl == "face"][0] 597: 598: kin_npz = os.path.join(CACHE_DIR, "korin_bl_in.npz") 599: kout_npz = os.path.join(CACHE_DIR, "korin_bl_out.npz") 600: np.savez(read_file{"EndLine":870,"Path":"~/work/lowmarch/tools/build_adversarial.py","StartLine":815}
input
{ "EndLine": 870, "Path": "~/work/lowmarch/tools/build_adversarial.py", "StartLine": 815 }result, 57 lines
Showing lines 815-870 of 873 815: html = f.read() 816: with open(os.path.join(ADV_OUT_DIR, "index.html"), "w") as f: 817: f.write(html) 818: three_link = os.path.join(ADV_OUT_DIR, "three") 819: if not os.path.exists(three_link): 820: os.symlink(bs.LOCAL_THREE, three_link) 821: 822: if not args.render_only: 823: print("1/5 Building adversarial Valen (Blender 5.2 sculpt, 3D lock hair, gothic-anime armour, GLB)...") 824: valen_unit, _, _ = build_valen_adversarial(timings) 825: 826: print("2/5 Building upgraded Korin (Blender 5.2 wolf-cut hair, northern pauldrons & fur mantle)...") 827: korin_unit = build_korin_adversarial(timings) 828: 829: # Terrain 830: world_holder = type("WorldPortrait", (), {})() 831: world_holder.prims = terrain.plains(width=4.8, depth=2.1, thick=0.30, seed=5, tufts=34, stones=7) 832: world_holder.roles = [pr["role"] for pr in world_holder.prims] 833: world_holder.tex = {} 834: plains_path = os.path.join(ADV_OUT_DIR, "plains.glb") 835: export_glb.export(world_holder, vp.PALETTE, plains_path, only_world=True) 836: bs.wrap_glb_json(plains_path) 837: 838: scene_doc = dict( 839: camera=dict(target=[0.02, 0.90, 0.0], height=2.16, pitch=8.5), 840: key=[-0.62, 0.48, 0.62], 841: grade=dict(ambient=[0.86, 0.88, 0.96], key=[1.04, 1.00, 0.94], rim=[0.28, 0.25, 0.20]), 842: characters=[valen_unit, korin_unit], 843: ) 844: with open(os.path.join(ADV_OUT_DIR, "scene.json"), "w") as f: 845: json.dump(scene_doc, f) 846: 847: print("3/5 Auditing ~/out/valen_finished.glb in headless Blender 5.2...") 848: audit = verify_standalone_glb_in_blender("~/out/valen_finished.glb", timings) 849: print(" GLB Audit:", audit) 850: 851: print("4/5 Shooting After battle visual (~/out/battle_frame_after.png, 1920x1080 @ ss=2)...") 852: t_r1 = time.time() 853: shoot_url("shot=1&w=1920&h=1080&ss=2", args.after_png) 854: timings["render_after_battle_s"] = round(time.time() - t_r1, 2) 855: 856: print("5/5 Shooting 24 mm Perspective + Flattice showcase directly from valen_finished.glb...") 857: t_r2 = time.time() 858: off_png = os.path.join(CACHE_DIR, "flattice_off.png") 859: on_png = os.path.join(CACHE_DIR, "flattice_on.png") 860: q_base = "shot=1&glb=valen_finished.glb&clip=battle_guard&yaw=34&target=-0.03,1.38,0.04&height=0.68&pitch=5&w=960&h=960&ss=2&lens=24" 861: shoot_url(f"{q_base}&flat=0", off_png) 862: shoot_url(f"{q_base}&flat=0.85", on_png) 863: compose_flattice_diptych(off_png, on_png, args.flattice_png) 864: timings["render_flattice_persp_s"] = round(time.time() - t_r2, 2) 865: 866: timings["pipeline_total_s"] = round(time.time() - t_all, 2) 867: with open(os.path.join(CACHE_DIR, "adversarial_timings.json"), "w") as f: 868: json.dump(timings, f, indent=2) 869: print("DONE! Timings:", json.dumps(timings, indent=2)) 870: