A 3D model pipeline, pushed by Gemini 4 Carbon
agent
+1:28:34reasoning
The rendering task duration suggests a possible bottleneck with the output file. Investigating the file size and metadata of the glb file should help determine if the file write is taking longer than expected. Examining the file size might reveal if the output is unusually large.
run_command{"CommandLine":"python3 -c '\nimport os, json, struct\np = \"~/out/valen_finished.glb\"\nsz = os.path.getsize(p)\nwith open(p, \"rb\") as f:\n magic, ver, total = struct.unpack(\"<4sII\", f.read(12))\n jlen, jtype = struct.unpack(\"<I4s\", f.read(8))\n j = json.loads(f.read(jlen))\nprint(f\"Size: {sz} bytes ({sz/1048576:.2f} MB)\")\nprint(\"Meshes:\", len(j[\"meshes\"]), \"Materials:\", len(j[\"materials\"]), \"Skins:\", len(j[\"skins\"]), \"Joints:\", len(j[\"skins\"][0][\"joints\"]))\nprint(\"Textures:\", len(j.get(\"textures\", [])), \"Images:\", len(j.get(\"images\", [])))\nfor a in j.get(\"animations\", []):\n interps = sorted(set(s[\"interpolation\"] for s in a[\"samplers\"]))\n in_acc = j[\"accessors\"][a[\"samplers\"][0][\"input\"]]\n print(f\" Clip {a[\\\"name\\\"]:20s}: channels={len(a[\\\"channels\\\"]):3d}, keys={in_acc[\\\"count\\\"]:2d}, range={in_acc[\\\"min\\\"]}..{in_acc[\\\"max\\\"]}s, interp={interps}\")\n'","WaitMsBeforeAsync":5000,"toolSummary":"Inspect valen_finished.glb JSON manifest"}error
input
{ "CommandLine": "python3 -c '\nimport os, json, struct\np = \"~/out/valen_finished.glb\"\nsz = os.path.getsize(p)\nwith open(p, \"rb\") as f:\n magic, ver, total = struct.unpack(\"<4sII\", f.read(12))\n jlen, jtype = struct.unpack(\"<I4s\", f.read(8))\n j = json.loads(f.read(jlen))\nprint(f\"Size: {sz} bytes ({sz/1048576:.2f} MB)\")\nprint(\"Meshes:\", len(j[\"meshes\"]), \"Materials:\", len(j[\"materials\"]), \"Skins:\", len(j[\"skins\"]), \"Joints:\", len(j[\"skins\"][0][\"joints\"]))\nprint(\"Textures:\", len(j.get(\"textures\", [])), \"Images:\", len(j.get(\"images\", [])))\nfor a in j.get(\"animations\", []):\n interps = sorted(set(s[\"interpolation\"] for s in a[\"samplers\"]))\n in_acc = j[\"accessors\"][a[\"samplers\"][0][\"input\"]]\n print(f\" Clip {a[\\\"name\\\"]:20s}: channels={len(a[\\\"channels\\\"]):3d}, keys={in_acc[\\\"count\\\"]:2d}, range={in_acc[\\\"min\\\"]}..{in_acc[\\\"max\\\"]}s, interp={interps}\")\n'", "WaitMsBeforeAsync": 5000, "toolSummary": "Inspect valen_finished.glb JSON manifest" }result, error, 7 lines
Command exited with code 1. Command output: File "<string>", line 15 print(f" Clip {a[\"name\"]:20s}: channels={len(a[\"channels\"]):3d}, keys={in_acc[\"count\"]:2d}, range={in_acc[\"min\"]}..{in_acc[\"max\"]}s, interp={interps}") ^ SyntaxError: f-string expression part cannot include a backslashrun_command{"CommandLine":"python3 -c '\nimport os, json, struct\np = \"~/out/valen_finished.glb\"\nsz = os.path.getsize(p)\nwith open(p, \"rb\") as f:\n magic, ver, total = struct.unpack(\"<4sII\", f.read(12))\n jlen, jtype = struct.unpack(\"<I4s\", f.read(8))\n j = json.loads(f.read(jlen))\nprint(\"Size:\", sz, round(sz/1048576, 2), \"MB\")\nprint(\"Meshes:\", len(j[\"meshes\"]), \"Materials:\", len(j[\"materials\"]), \"Joints:\", len(j[\"skins\"][0][\"joints\"]), \"Images:\", len(j.get(\"images\", [])))\nfor a in j.get(\"animations\", []):\n nm = a[\"name\"]\n ch = len(a[\"channels\"])\n interps = sorted(set(s[\"interpolation\"] for s in a[\"samplers\"]))\n in_acc = j[\"accessors\"][a[\"samplers\"][0][\"input\"]] if a[\"samplers\"] else {\"count\": 0, \"min\": [0], \"max\": [0]}\n print(\" Clip:\", nm, \"channels:\", ch, \"keys:\", in_acc[\"count\"], \"range:\", in_acc[\"min\"], in_acc[\"max\"], \"interp:\", interps)\n'","WaitMsBeforeAsync":5000,"toolSummary":"Inspect valen_finished.glb JSON manifest"}
input
{ "CommandLine": "python3 -c '\nimport os, json, struct\np = \"~/out/valen_finished.glb\"\nsz = os.path.getsize(p)\nwith open(p, \"rb\") as f:\n magic, ver, total = struct.unpack(\"<4sII\", f.read(12))\n jlen, jtype = struct.unpack(\"<I4s\", f.read(8))\n j = json.loads(f.read(jlen))\nprint(\"Size:\", sz, round(sz/1048576, 2), \"MB\")\nprint(\"Meshes:\", len(j[\"meshes\"]), \"Materials:\", len(j[\"materials\"]), \"Joints:\", len(j[\"skins\"][0][\"joints\"]), \"Images:\", len(j.get(\"images\", [])))\nfor a in j.get(\"animations\", []):\n nm = a[\"name\"]\n ch = len(a[\"channels\"])\n interps = sorted(set(s[\"interpolation\"] for s in a[\"samplers\"]))\n in_acc = j[\"accessors\"][a[\"samplers\"][0][\"input\"]] if a[\"samplers\"] else {\"count\": 0, \"min\": [0], \"max\": [0]}\n print(\" Clip:\", nm, \"channels:\", ch, \"keys:\", in_acc[\"count\"], \"range:\", in_acc[\"min\"], in_acc[\"max\"], \"interp:\", interps)\n'", "WaitMsBeforeAsync": 5000, "toolSummary": "Inspect valen_finished.glb JSON manifest" }result, 9 lines
Command exited with code 0. Command output: Size: 8473576 8.08 MB Meshes: 113 Materials: 113 Joints: 59 Images: 8 Clip: battle_guard channels: 43 keys: 2 range: [0.0] [1.0] interp: ['LINEAR'] Clip: idle_breath_12fps channels: 43 keys: 25 range: [0.0] [2.0] interp: ['STEP'] Clip: strike_combo_12fps channels: 43 keys: 9 range: [0.0] [1.5] interp: ['STEP'] Clip: bust_ref channels: 28 keys: 2 range: [0.0] [1.0] interp: ['LINEAR']
agent
+1:28:58reasoning
The manifest confirms the earlier hypothesis about the model size reduction. Tuning the resolution parameters resulted in a significantly smaller GLB file. The mesh, material, and image counts provide additional context about the model's structure.
manage_task{"Action":"status","TaskId":"d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414"}
input
{ "Action": "status", "TaskId": "d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414" }result, 8 lines
Task: d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414 Status: RUNNING Log: file://~/.gemini/antigravity-cli/brain/d3ac2d6a-0d1c-453a-9076-391f374ef486/.system_generated/tasks/task-414.log Log output: 4/5 Shooting After battle visual (~/out/battle_frame_after.png, 1920x1080 @ ss=2)... 5/5 Shooting 24 mm Perspective + Flattice showcase directly from valen_finished.glb... Last progress: 8s ago
agent
+1:29:25reasoning
The image rendering process appears to be complete. The final frame, corresponding to "Shooting 24 mm Perspective + Flattice showcase," is now available.
read_file{"Path":"~/out/battle_frame.png"}
input
{ "Path": "~/out/battle_frame.png" }result, 1 line
Showing binary file of type image/png
read_file{"Path":"~/out/battle_frame_after.png"}
input
{ "Path": "~/out/battle_frame_after.png" }result, 1 line
Showing binary file of type image/png
agent
+1:29:34reasoning
The visual inspection of the image battle_frame_after.png revealed a critical detail regarding the rendering of hair curves and the armor beneath. This observation provides insights into the visual artifacts present in the image and their relation.
Observed the exaggerated hair curves in the image and hypothesized the cause was a misconfiguration within the 3D modeling software's curve modifier. The issue stems from the software's default behavior, replacing the curve's original radius with the taper object's Y value when not in the multiply radius mode. Confirmed this with the coordinates of the bevel and taper objects used in the 3D model.
The exaggerated hair curves in the image stem from the "OVERRIDE" setting of the curve's taper radius mode, causing the taper object's Y-coordinate to override the intended radius of the spline points. Changing to "MULTIPLY" mode will scale the hair locks back to their intended width. Furthermore, a gap observed at Valen's ankle is related to a boot offset setting, currently under investigation.
The ankle gap results from a mismatch between the boot and foot bone heights, confirmed as a 2.9 cm discrepancy. The fix involves adjusting the boot and breeches' vertical positions to match the foot bone height, overlapping the boot collar seamlessly. The gold rims on the shin armor are also misaligned due to a solidification offset; shifting the rims outward along the radial vector corrects the placement. I'm thinking through how to approach this.
manage_task{"Action":"status","TaskId":"d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414"}
input
{ "Action": "status", "TaskId": "d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414" }result, 8 lines
Task: d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414 Status: RUNNING Log: file://~/.gemini/antigravity-cli/brain/d3ac2d6a-0d1c-453a-9076-391f374ef486/.system_generated/tasks/task-414.log Log output: 4/5 Shooting After battle visual (~/out/battle_frame_after.png, 1920x1080 @ ss=2)... 5/5 Shooting 24 mm Perspective + Flattice showcase directly from valen_finished.glb... Last progress: 40s ago
agent
+1:29:57reasoning
Initial hypothesis: Task-414 is unnecessary to complete the current render due to a hair radius adjustment. Terminating the task to avoid redundant work. The appropriate taper radius mode will be set to 'MULTI'.
manage_task{"Action":"kill","TaskId":"d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414"}
input
{ "Action": "kill", "TaskId": "d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414" }result, 1 line
Task "d3ac2d6a-0d1c-453a-9076-391f374ef486/task-414" cancelled.
agent
+1:30:18reasoning
I'm thinking through how to approach this.
Directly setting the NURBS control point radii based on the taper function at specific U values should provide precise control over the curve's width. This eliminates the dependency on the taper_object and its associated issues in Blender's override mode. Checking the bevel object's local axes within the curve context is essential for correct extrusion along the spline.
Bounding box validation is critical after control point radius adjustments; a significant size discrepancy indicates a fundamental issue with the curve setup or scaling. Examining the script, the ankle and gold border offsets require careful checking, particularly the breeches, cavalier boot height, and the solidify shell thickness for gold borders. Ensuring no ankle gap and correct outward thickening for the gold shells is essential for a precise fit.
read_file{"EndLine":325,"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","StartLine":250}
input
{ "EndLine": 325, "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "StartLine": 250 }result, 77 lines
Showing lines 250-325 of 1448 250: sp.points[i].co = (px, py, 0.0, 1.0) 251: sp.use_cyclic_u = True 252: bev_ob = bpy.data.objects.new(f"BevelOb_{profile_kind}", bev_cu) 253: bpy.context.collection.objects.link(bev_ob) 254: 255: tap_cu = bpy.data.curves.new(f"Taper_{profile_kind}", type="CURVE") 256: tap_cu.dimensions = "2D" 257: tap_cu.resolution_u = 6 258: tsp = tap_cu.splines.new("NURBS") 259: # Nonlinear anime swell at 30%, needle-sharp point at tip 260: tpts = [(0.0, 0.72), (0.16, 1.06), (0.38, 1.12), (0.66, 0.84), (0.86, 0.42), (0.96, 0.14), (1.0, 0.025)] 261: tsp.points.add(len(tpts) - 1) 262: for i, (tx, ty) in enumerate(tpts): 263: tsp.points[i].co = (tx, ty, 0.0, 1.0) 264: tsp.use_endpoint_u = True 265: tsp.order_u = 4 266: tap_ob = bpy.data.objects.new(f"TaperOb_{profile_kind}", tap_cu) 267: bpy.context.collection.objects.link(tap_ob) 268: return bev_ob, tap_ob 269: 270: 271: def _add_lock_curve(name, pts_bl, width, thick_ratio, head_center_bl, bev_ob, tap_ob, twist=0.0, res_u=7): 272: cu = bpy.data.curves.new(name, type="CURVE") 273: cu.dimensions = "3D" 274: cu.resolution_u = res_u 275: cu.bevel_mode = "OBJECT" 276: cu.bevel_object = bev_ob 277: cu.taper_object = tap_ob 278: cu.use_fill_caps = True 279: 280: sp = cu.splines.new("NURBS") 281: sp.points.add(len(pts_bl) - 1) 282: pts = np.asarray(pts_bl, dtype=np.float64) 283: tang = np.gradient(pts, axis=0) 284: 285: for i, p in enumerate(pts): 286: sp.points[i].co = (p[0], p[1], p[2], 1.0) 287: sp.points[i].radius = width 288: # Orient local +Y of bevel cross-section away from skull center! 289: t = tang[i] 290: tn = np.linalg.norm(t) 291: t = t / tn if tn > 1e-8 else np.array([0.0, 0.0, -1.0]) 292: away = p - head_center_bl 293: away = away - t * np.dot(away, t) 294: an = np.linalg.norm(away) 295: away = away / an if an > 1e-8 else np.array([0.0, 1.0, 0.0]) 296: 297: # Blender curve MINIMUM twist frame approximation: compute angle around tangent from Z-up ref 298: up_ref = np.array([0.0, 0.0, 1.0]) 299: if abs(np.dot(t, up_ref)) > 0.94: 300: up_ref = np.array([0.0, 1.0, 0.0]) 301: b0 = np.cross(up_ref, t) 302: b0 /= max(np.linalg.norm(b0), 1e-8) 303: n0 = np.cross(t, b0) 304: ang = math.atan2(np.dot(away, b0), np.dot(away, n0)) 305: sp.points[i].tilt = ang + twist * (i / max(1, len(pts) - 1)) 306: 307: sp.use_endpoint_u = True 308: sp.order_u = min(4, len(pts)) 309: cu.twist_mode = "Z_UP" 310: 311: ob = bpy.data.objects.new(name, cu) 312: bpy.context.collection.objects.link(ob) 313: 314: # Convert to mesh and scale cross-section aspect slightly if needed 315: deps = bpy.context.evaluated_depsgraph_get() 316: ev = ob.evaluated_get(deps) 317: me = bpy.data.meshes.new_from_object(ev) 318: for poly in me.polygons: 319: poly.use_smooth = True 320: mob = bpy.data.objects.new(name + "_m", me) 321: bpy.context.collection.objects.link(mob) 322: bpy.data.objects.remove(ob, do_unlink=True) 323: return mob 324: 325:read_file{"EndLine":645,"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","StartLine":615}
input
{ "EndLine": 645, "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "StartLine": 615 }result, 32 lines
Showing lines 615-645 of 1448 615: center = Vector(grid_bl.reshape(-1, 3).mean(axis=0)) 616: dot_sum = sum((f.calc_center_median() - center).dot(f.normal) for f in bm.faces) 617: if dot_sum < 0: 618: bmesh.ops.reverse_faces(bm, faces=bm.faces[:]) 619: # Crease boundary edges slightly so Catmull-Clark keeps crisp armour silhouettes! 620: crease_layer = bm.edges.layers.crease.verify() if hasattr(bm.edges.layers, "crease") else None 621: for e in bm.edges: 622: if e.is_boundary and crease_layer is not None: 623: e[crease_layer] = 0.55 624: bm.to_mesh(ob.data) 625: bm.free() 626: for poly in ob.data.polygons: 627: poly.use_smooth = True 628: 629: if subsurf > 0 and (U * V < 420): 630: sub = ob.modifiers.new("Sub", "SUBSURF") 631: sub.levels = sub.render_levels = subsurf 632: if thickness > 0: 633: sol = ob.modifiers.new("Sol", "SOLIDIFY") 634: sol.thickness = thickness 635: sol.offset = 1.0 # thicken outward 636: sol.use_rim = True 637: pos_v, nrm_v, tri_v = eval_mesh_data(ob, triangulate=True) 638: bpy.data.objects.remove(ob, do_unlink=True) 639: return pos_v, nrm_v, tri_v 640: 641: 642: def _curve_pipe_in_blender(name, pts_bl, radius=0.0032, cyclic=False, seg=8): 643: cu = bpy.data.curves.new(name, type="CURVE") 644: cu.dimensions = "3D" 645: cu.resolution_u = 8read_file{"EndLine":1065,"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","StartLine":985}
input
{ "EndLine": 1065, "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "StartLine": 985 }result, 82 lines
Showing lines 985-1065 of 1448 985: return np.array([orig.x + d.x * (r + lift), orig.y + d.y * (r + lift), z_val]) 986: 987: # Tailored dark breeches from hip to ankle 988: nu_lg, nv_lg = 26, 16 989: br_g = np.zeros((nu_lg, nv_lg, 3)) 990: for i, az in enumerate(np.linspace(-180, 180, nu_lg, endpoint=False)): 991: for j, z_val in enumerate(np.linspace(ul[2] + 0.03, ankle_z + 0.02, nv_lg)): 992: br_g[i, j] = leg_ray(z_val, az, lift=0.0045) 993: add(f"breeches_{side_nm}", "doublet", 994: _grid_shell_in_blender(f"Breech{side_nm}", br_g, 0.0025, 1, cyclic_u=True), f"leg_skin_{side_nm}", "trousers") 995: 996: # Dark Espresso Leather Cavalier Boot / Thigh Cuisse Cuff (knee + 9 cm down to ankle) 997: bt_g = np.zeros((26, 12, 3)) 998: for i, az in enumerate(np.linspace(-180, 180, 26, endpoint=False)): 999: v_notch = 0.022 * max(0.0, math.cos(math.radians(az))) # subtle cavalier V-peak at front thigh! 1000: for j, t in enumerate(np.linspace(0, 1, 12)): 1001: zz = (knee_z + 0.085 + v_notch) * (1 - t) + (ankle_z + 0.01) * t 1002: cuff_flare = 0.012 * max(0.0, 0.25 - t) * 4.0 1003: bt_g[i, j] = leg_ray(zz, az, lift=0.0085 + cuff_flare) 1004: add(f"cavalier_boot_{side_nm}", "boot", 1005: _grid_shell_in_blender(f"Boot{side_nm}", bt_g, 0.0035, 1, cyclic_u=True), f"leg_skin_{side_nm}", "boots") 1006: add(f"boot_top_gold_{side_nm}", "gold", _curve_pipe_in_blender(f"BootG{side_nm}", bt_g[:, 0], 0.0025, True), 1007: f"uleg_{side_nm}", "boots") 1008: 1009: # Sculpted Winged Steel Poleyn (faceted knee cop + swept outer side-wing!) 1010: pol_g = np.zeros((17, 7, 3)) 1011: for i, az in enumerate(np.linspace(-112, 112, 17)): 1012: wing_ext = 0.032 * max(0.0, math.sin(math.radians(az * sx))) ** 1.5 1013: keel = 0.014 * max(0.0, 1.0 - abs(az) / 36.0) ** 1.5 1014: for j, s in enumerate(np.linspace(-1.0, 1.0, 7)): 1015: zz = knee_z + 0.012 - s * (0.058 + 0.5 * wing_ext) 1016: pol_g[i, j] = leg_ray(zz, az, lift=0.015 + keel * (1.0 - 0.6 * s * s) + wing_ext * (1.0 - 0.4 * s * s)) 1017: add(f"poleyn_{side_nm}", "steel", _grid_shell_in_blender(f"Poleyn{side_nm}", pol_g, 0.0045, 1), 1018: f"lleg_{side_nm}", "plate") 1019: pol_rim = np.vstack([pol_g[:, 0], pol_g[-1, 1:], pol_g[::-1, -1], pol_g[0, -2::-1]]) 1020: add(f"poleyn_gold_{side_nm}", "gold", _curve_pipe_in_blender(f"PolGold{side_nm}", pol_rim, 0.0025, True), 1021: f"lleg_{side_nm}", "plate") 1022: 1023: # Anatomically Contoured Fluted Steel Shin-Greave (front + outer calf shell with crisp shin keel!) 1024: grv_g = np.zeros((21, 10, 3)) 1025: for i, az in enumerate(np.linspace(-118, 118, 21)): 1026: shin_keel = 0.010 * max(0.0, 1.0 - abs(az) / 26.0) ** 1.6 1027: for j, t in enumerate(np.linspace(0, 1, 10)): 1028: zz = (knee_z - 0.048) * (1 - t) + (ankle_z + 0.042) * t 1029: grv_g[i, j] = leg_ray(zz, az, lift=0.012 + shin_keel) 1030: add(f"fluted_greave_{side_nm}", "steel", _grid_shell_in_blender(f"Greave{side_nm}", grv_g, 0.0045, 1), 1031: f"lleg_{side_nm}", "plate") 1032: grv_rim = np.vstack([grv_g[:, 0], grv_g[-1, 1:], grv_g[::-1, -1], grv_g[0, -2::-1]]) 1033: add(f"greave_gold_{side_nm}", "gold", _curve_pipe_in_blender(f"GrvGold{side_nm}", grv_rim, 0.0026, True), 1034: f"lleg_{side_nm}", "plate") 1035: 1036: # 4-Lame Articulated Pointed-Almond Steel Sabaton + Heeled Dark Leather Riding Boot Sole (100% enclosed!) 1037: heel_y = ft[1] - 0.048 1038: toe_y = tb[1] + 0.088 1039: foot_cx = ft[0] 1040: # Enclosed leather boot base + heel resting cleanly on Z = 0 1041: nu_f0, nv_f0 = 24, 10 1042: fbase_g = np.zeros((nu_f0, nv_f0, 3)) 1043: for i, th in enumerate(np.linspace(0, 2 * math.pi, nu_f0, endpoint=False)): 1044: for j, s in enumerate(np.linspace(0, 1, nv_f0)): 1045: yy = heel_y * (1 - s) + toe_y * s 1046: taper_toe = (1.0 - 0.62 * max(0.0, (s - 0.55) / 0.45) ** 1.5) 1047: hw = 0.048 * taper_toe 1048: hz = 0.044 * (1.0 - 0.52 * s) 1049: zc = 0.042 * (1.0 - 0.42 * s) 1050: px = foot_cx + hw * math.cos(th) 1051: pz = max(0.002, zc + hz * math.sin(th)) 1052: fbase_g[i, j] = [px, yy, pz] 1053: add(f"boot_foot_{side_nm}", "boot", _grid_shell_in_blender(f"BootFoot{side_nm}", fbase_g, 0.003, 1, cyclic_u=True), 1054: f"foot_{side_nm}", "boots") 1055: 1056: # 3 Overlapping Dorsal Steel Sabaton Lames over the instep! 1057: for sl_i in range(3): 1058: sab_g = np.zeros((15, 4, 3)) 1059: s0 = 0.16 + sl_i * 0.24 1060: s1 = s0 + 0.28 1061: for i, u_a in enumerate(np.linspace(-85, 85, 15)): 1062: ur = math.radians(u_a) 1063: keel = 0.007 * max(0.0, 1.0 - abs(u_a) / 30.0) 1064: for j, s in enumerate(np.linspace(s0, min(0.98, s1), 4)): 1065: yy = heel_y * (1 - s) + toe_y * sresultTool execution was canceled
Tool execution was canceled Log: file://~/.gemini/antigravity-cli/brain/d3ac2d6a-0d1c-453a-9076-391f374ef486/.system_generated/tasks/task-414.log
agent
+1:30:42reasoning
I'm thinking through how to approach this.
Applying changes to address the Blender override of the radius value and ensuring consistent rendering. Refining mesh thickness to emphasize gold borders on steel elements. Adjusting ankle joint positioning by extending breeches and boot geometry and adjusting the boot collar to ensure a seamless fit. Optimizing animation processing by stepping frames in the adversarial build script, aiming for faster processing.
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":"def _add_lock_curve(name, pts_bl, width, thick_ratio, head_center_bl, bev_ob, tap_ob, twist=0.0, res_u=7):\n cu = bpy.data.curves.new(name, type=\"CURVE\")\n cu.dimensions = \"3D\"\n cu.resolution_u = res_u\n cu.bevel_mode = \"OBJECT\"\n cu.bevel_object = bev_ob\n cu.use_fill_caps = True\n\n # Resample control polyline cleanly to 7 points so explicit per-point anime swell/needle taper is exact!\n raw = np.asarray(pts_bl, dtype=np.float64)\n dseg = np.linalg.norm(np.diff(raw, axis=0), axis=1)\n arc = np.concatenate([[0.0], np.cumsum(dseg)])\n arc /= max(arc[-1], 1e-8)\n u_samp = np.array([0.0, 0.14, 0.34, 0.58, 0.78, 0.92, 1.0])\n taper_prof = np.array([0.74, 1.06, 1.12, 0.86, 0.52, 0.22, 0.025])\n pts = np.stack([np.interp(u_samp, arc, raw[:, c]) for c in range(3)], axis=-1)\n\n sp = cu.splines.new(\"NURBS\")\n sp.points.add(len(pts) - 1)\n tang = np.gradient(pts, axis=0)\n\n for i, p in enumerate(pts):\n sp.points[i].co = (p[0], p[1], p[2], 1.0)\n sp.points[i].radius = float(width * taper_prof[i])","Target":"def _add_lock_curve(name, pts_bl, width, thick_ratio, head_center_bl, bev_ob, tap_ob, twist=0.0, res_u=7):\n cu = bpy.data.curves.new(name, type=\"CURVE\")\n cu.dimensions = \"3D\"\n cu.resolution_u = res_u\n cu.bevel_mode = \"OBJECT\"\n cu.bevel_object = bev_ob\n cu.taper_object = tap_ob\n cu.use_fill_caps = True\n\n sp = cu.splines.new(\"NURBS\")\n sp.points.add(len(pts_bl) - 1)\n pts = np.asarray(pts_bl, dtype=np.float64)\n tang = np.gradient(pts, axis=0)\n\n for i, p in enumerate(pts):\n sp.points[i].co = (p[0], p[1], p[2], 1.0)\n sp.points[i].radius = width"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": "def _add_lock_curve(name, pts_bl, width, thick_ratio, head_center_bl, bev_ob, tap_ob, twist=0.0, res_u=7):\n cu = bpy.data.curves.new(name, type=\"CURVE\")\n cu.dimensions = \"3D\"\n cu.resolution_u = res_u\n cu.bevel_mode = \"OBJECT\"\n cu.bevel_object = bev_ob\n cu.use_fill_caps = True\n\n # Resample control polyline cleanly to 7 points so explicit per-point anime swell/needle taper is exact!\n raw = np.asarray(pts_bl, dtype=np.float64)\n dseg = np.linalg.norm(np.diff(raw, axis=0), axis=1)\n arc = np.concatenate([[0.0], np.cumsum(dseg)])\n arc /= max(arc[-1], 1e-8)\n u_samp = np.array([0.0, 0.14, 0.34, 0.58, 0.78, 0.92, 1.0])\n taper_prof = np.array([0.74, 1.06, 1.12, 0.86, 0.52, 0.22, 0.025])\n pts = np.stack([np.interp(u_samp, arc, raw[:, c]) for c in range(3)], axis=-1)\n\n sp = cu.splines.new(\"NURBS\")\n sp.points.add(len(pts) - 1)\n tang = np.gradient(pts, axis=0)\n\n for i, p in enumerate(pts):\n sp.points[i].co = (p[0], p[1], p[2], 1.0)\n sp.points[i].radius = float(width * taper_prof[i])", "Target": "def _add_lock_curve(name, pts_bl, width, thick_ratio, head_center_bl, bev_ob, tap_ob, twist=0.0, res_u=7):\n cu = bpy.data.curves.new(name, type=\"CURVE\")\n cu.dimensions = \"3D\"\n cu.resolution_u = res_u\n cu.bevel_mode = \"OBJECT\"\n cu.bevel_object = bev_ob\n cu.taper_object = tap_ob\n cu.use_fill_caps = True\n\n sp = cu.splines.new(\"NURBS\")\n sp.points.add(len(pts_bl) - 1)\n pts = np.asarray(pts_bl, dtype=np.float64)\n tang = np.gradient(pts, axis=0)\n\n for i, p in enumerate(pts):\n sp.points[i].co = (p[0], p[1], p[2], 1.0)\n sp.points[i].radius = width" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 271 (+11/-4 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" if thickness > 0:\n sol = ob.modifiers.new(\"Sol\", \"SOLIDIFY\")\n sol.thickness = thickness\n sol.offset = -1.0 # thicken inward so grid_bl is the exact outer surface for gold border pipes!\n sol.use_rim = True","Target":" if thickness > 0:\n sol = ob.modifiers.new(\"Sol\", \"SOLIDIFY\")\n sol.thickness = thickness\n sol.offset = 1.0 # thicken outward\n sol.use_rim = True"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " if thickness > 0:\n sol = ob.modifiers.new(\"Sol\", \"SOLIDIFY\")\n sol.thickness = thickness\n sol.offset = -1.0 # thicken inward so grid_bl is the exact outer surface for gold border pipes!\n sol.use_rim = True", "Target": " if thickness > 0:\n sol = ob.modifiers.new(\"Sol\", \"SOLIDIFY\")\n sol.thickness = thickness\n sol.offset = 1.0 # thicken outward\n sol.use_rim = True" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 639 (+1/-1 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # Tailored dark breeches from hip to ankle\n nu_lg, nv_lg = 26, 16\n br_g = np.zeros((nu_lg, nv_lg, 3))\n z_breech_bot = max(0.036, ankle_z - 0.055)\n for i, az in enumerate(np.linspace(-180, 180, nu_lg, endpoint=False)):\n for j, z_val in enumerate(np.linspace(ul[2] + 0.03, z_breech_bot, nv_lg)):\n br_g[i, j] = leg_ray(z_val, az, lift=0.0065)\n add(f\"breeches_{side_nm}\", \"doublet\",\n _grid_shell_in_blender(f\"Breech{side_nm}\", br_g, 0.0025, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"trousers\")\n\n # Dark Espresso Leather Cavalier Boot / Thigh Cuisse Cuff (knee + 9 cm all the way down into boot foot!)\n bt_g = np.zeros((26, 14, 3))\n z_boot_bot = max(0.032, ankle_z - 0.062)\n for i, az in enumerate(np.linspace(-180, 180, 26, endpoint=False)):\n v_notch = 0.022 * max(0.0, math.cos(math.radians(az))) # subtle cavalier V-peak at front thigh!\n for j, t in enumerate(np.linspace(0, 1, 14)):\n zz = (knee_z + 0.085 + v_notch) * (1 - t) + z_boot_bot * t\n cuff_flare = 0.012 * max(0.0, 0.25 - t) * 4.0\n bt_g[i, j] = leg_ray(zz, az, lift=0.0115 + cuff_flare)\n add(f\"cavalier_boot_{side_nm}\", \"boot\",\n _grid_shell_in_blender(f\"Boot{side_nm}\", bt_g, 0.0035, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"boots\")\n add(f\"boot_top_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"BootG{side_nm}\", bt_g[:, 0], 0.0028, True),\n f\"uleg_{side_nm}\", \"boots\")\n\n # Sculpted Winged Steel Poleyn (faceted knee cop + swept outer side-wing!)\n pol_g = np.zeros((17, 7, 3))\n for i, az in enumerate(np.linspace(-112, 112, 17)):\n wing_ext = 0.032 * max(0.0, math.sin(math.radians(az * sx))) ** 1.5\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 36.0) ** 1.5\n for j, s in enumerate(np.linspace(-1.0, 1.0, 7)):\n zz = knee_z + 0.012 - s * (0.058 + 0.5 * wing_ext)\n pol_g[i, j] = leg_ray(zz, az, lift=0.018 + keel * (1.0 - 0.6 * s * s) + wing_ext * (1.0 - 0.4 * s * s))\n add(f\"poleyn_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Poleyn{side_nm}\", pol_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n pol_rim = np.vstack([pol_g[:, 0], pol_g[-1, 1:], pol_g[::-1, -1], pol_g[0, -2::-1]])\n add(f\"poleyn_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"PolGold{side_nm}\", pol_rim, 0.0028, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # Anatomically Contoured Fluted Steel Shin-Greave (front + outer calf shell with crisp shin keel!)\n grv_g = np.zeros((21, 10, 3))\n for i, az in enumerate(np.linspace(-118, 118, 21)):\n shin_keel = 0.010 * max(0.0, 1.0 - abs(az) / 26.0) ** 1.6\n for j, t in enumerate(np.linspace(0, 1, 10)):\n zz = (knee_z - 0.048) * (1 - t) + (ankle_z + 0.032) * t\n grv_g[i, j] = leg_ray(zz, az, lift=0.0155 + shin_keel)\n add(f\"fluted_greave_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Greave{side_nm}\", grv_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n grv_rim = np.vstack([grv_g[:, 0], grv_g[-1, 1:], grv_g[::-1, -1], grv_g[0, -2::-1]])\n add(f\"greave_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"GrvGold{side_nm}\", grv_rim, 0.0028, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # 4-Lame Articulated Pointed-Almond Steel Sabaton + Heeled Dark Leather Riding Boot Sole (100% enclosed!)\n heel_y = ft[1] - 0.048\n toe_y = tb[1] + 0.088\n foot_cx = ft[0]\n # Enclosed leather boot base + heel resting cleanly on Z = 0, rising high enough to overlap cavalier shaft!\n nu_f0, nv_f0 = 24, 10\n fbase_g = np.zeros((nu_f0, nv_f0, 3))\n for i, th in enumerate(np.linspace(0, 2 * math.pi, nu_f0, endpoint=False)):\n for j, s in enumerate(np.linspace(0, 1, nv_f0)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.62 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = 0.050 * taper_toe\n hz = 0.056 * (1.0 - 0.56 * s)\n zc = 0.050 * (1.0 - 0.46 * s)\n px = foot_cx + hw * math.cos(th)\n pz = max(0.002, zc + hz * math.sin(th))\n fbase_g[i, j] = [px, yy, pz]\n add(f\"boot_foot_{side_nm}\", \"boot\", _grid_shell_in_blender(f\"BootFoot{side_nm}\", fbase_g, 0.003, 1, cyclic_u=True),\n f\"foot_{side_nm}\", \"boots\")\n\n # 3 Overlapping Dorsal Steel Sabaton Lames over the instep!\n for sl_i in range(3):\n sab_g = np.zeros((15, 4, 3))\n s0 = 0.16 + sl_i * 0.24\n s1 = s0 + 0.28\n for i, u_a in enumerate(np.linspace(-85, 85, 15)):\n ur = math.radians(u_a)\n keel = 0.007 * max(0.0, 1.0 - abs(u_a) / 30.0)\n for j, s in enumerate(np.linspace(s0, min(0.98, s1), 4)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.58 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = (0.055 + sl_i * 0.0018) * taper_toe\n hz = (0.060 + sl_i * 0.0018) * (1.0 - 0.52 * s)\n zc = 0.050 * (1.0 - 0.46 * s)\n sab_g[i, j] = [foot_cx + hw * math.sin(ur), yy, zc + hz * math.cos(ur) + keel]\n add(f\"sabaton_lame_{side_nm}_{sl_i}\", \"steel\",\n _grid_shell_in_blender(f\"Sab{side_nm}{sl_i}\", sab_g, 0.0035, 1), f\"foot_{side_nm}\", \"plate\")","Target":" # Tailored dark breeches from hip to ankle\n nu_lg, nv_lg = 26, 16\n br_g = np.zeros((nu_lg, nv_lg, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_lg, endpoint=False)):\n for j, z_val in enumerate(np.linspace(ul[2] + 0.03, ankle_z + 0.02, nv_lg)):\n br_g[i, j] = leg_ray(z_val, az, lift=0.0045)\n add(f\"breeches_{side_nm}\", \"doublet\",\n _grid_shell_in_blender(f\"Breech{side_nm}\", br_g, 0.0025, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"trousers\")\n\n # Dark Espresso Leather Cavalier Boot / Thigh Cuisse Cuff (knee + 9 cm down to ankle)\n bt_g = np.zeros((26, 12, 3))\n for i, az in enumerate(np.linspace(-180, 180, 26, endpoint=False)):\n v_notch = 0.022 * max(0.0, math.cos(math.radians(az))) # subtle cavalier V-peak at front thigh!\n for j, t in enumerate(np.linspace(0, 1, 12)):\n zz = (knee_z + 0.085 + v_notch) * (1 - t) + (ankle_z + 0.01) * t\n cuff_flare = 0.012 * max(0.0, 0.25 - t) * 4.0\n bt_g[i, j] = leg_ray(zz, az, lift=0.0085 + cuff_flare)\n add(f\"cavalier_boot_{side_nm}\", \"boot\",\n _grid_shell_in_blender(f\"Boot{side_nm}\", bt_g, 0.0035, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"boots\")\n add(f\"boot_top_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"BootG{side_nm}\", bt_g[:, 0], 0.0025, True),\n f\"uleg_{side_nm}\", \"boots\")\n\n # Sculpted Winged Steel Poleyn (faceted knee cop + swept outer side-wing!)\n pol_g = np.zeros((17, 7, 3))\n for i, az in enumerate(np.linspace(-112, 112, 17)):\n wing_ext = 0.032 * max(0.0, math.sin(math.radians(az * sx))) ** 1.5\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 36.0) ** 1.5\n for j, s in enumerate(np.linspace(-1.0, 1.0, 7)):\n zz = knee_z + 0.012 - s * (0.058 + 0.5 * wing_ext)\n pol_g[i, j] = leg_ray(zz, az, lift=0.015 + keel * (1.0 - 0.6 * s * s) + wing_ext * (1.0 - 0.4 * s * s))\n add(f\"poleyn_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Poleyn{side_nm}\", pol_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n pol_rim = np.vstack([pol_g[:, 0], pol_g[-1, 1:], pol_g[::-1, -1], pol_g[0, -2::-1]])\n add(f\"poleyn_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"PolGold{side_nm}\", pol_rim, 0.0025, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # Anatomically Contoured Fluted Steel Shin-Greave (front + outer calf shell with crisp shin keel!)\n grv_g = np.zeros((21, 10, 3))\n for i, az in enumerate(np.linspace(-118, 118, 21)):\n shin_keel = 0.010 * max(0.0, 1.0 - abs(az) / 26.0) ** 1.6\n for j, t in enumerate(np.linspace(0, 1, 10)):\n zz = (knee_z - 0.048) * (1 - t) + (ankle_z + 0.042) * t\n grv_g[i, j] = leg_ray(zz, az, lift=0.012 + shin_keel)\n add(f\"fluted_greave_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Greave{side_nm}\", grv_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n grv_rim = np.vstack([grv_g[:, 0], grv_g[-1, 1:], grv_g[::-1, -1], grv_g[0, -2::-1]])\n add(f\"greave_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"GrvGold{side_nm}\", grv_rim, 0.0026, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # 4-Lame Articulated Pointed-Almond Steel Sabaton + Heeled Dark Leather Riding Boot Sole (100% enclosed!)\n heel_y = ft[1] - 0.048\n toe_y = tb[1] + 0.088\n foot_cx = ft[0]\n # Enclosed leather boot base + heel resting cleanly on Z = 0\n nu_f0, nv_f0 = 24, 10\n fbase_g = np.zeros((nu_f0, nv_f0, 3))\n for i, th in enumerate(np.linspace(0, 2 * math.pi, nu_f0, endpoint=False)):\n for j, s in enumerate(np.linspace(0, 1, nv_f0)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.62 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = 0.048 * taper_toe\n hz = 0.044 * (1.0 - 0.52 * s)\n zc = 0.042 * (1.0 - 0.42 * s)\n px = foot_cx + hw * math.cos(th)\n pz = max(0.002, zc + hz * math.sin(th))\n fbase_g[i, j] = [px, yy, pz]\n add(f\"boot_foot_{side_nm}\", \"boot\", _grid_shell_in_blender(f\"BootFoot{side_nm}\", fbase_g, 0.003, 1, cyclic_u=True),\n f\"foot_{side_nm}\", \"boots\")\n\n # 3 Overlapping Dorsal Steel Sabaton Lames over the instep!\n for sl_i in range(3):\n sab_g = np.zeros((15, 4, 3))\n s0 = 0.16 + sl_i * 0.24\n s1 = s0 + 0.28\n for i, u_a in enumerate(np.linspace(-85, 85, 15)):\n ur = math.radians(u_a)\n keel = 0.007 * max(0.0, 1.0 - abs(u_a) / 30.0)\n for j, s in enumerate(np.linspace(s0, min(0.98, s1), 4)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.58 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = (0.052 + sl_i * 0.0015) * taper_toe\n hz = (0.049 + sl_i * 0.0015) * (1.0 - 0.48 * s)\n zc = 0.042 * (1.0 - 0.42 * s)\n sab_g[i, j] = [foot_cx + hw * math.sin(ur), yy, zc + hz * math.cos(ur) + keel]\n add(f\"sabaton_lame_{side_nm}_{sl_i}\", \"steel\",\n _grid_shell_in_blender(f\"Sab{side_nm}{sl_i}\", sab_g, 0.0035, 1), f\"foot_{side_nm}\", \"plate\")"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # Tailored dark breeches from hip to ankle\n nu_lg, nv_lg = 26, 16\n br_g = np.zeros((nu_lg, nv_lg, 3))\n z_breech_bot = max(0.036, ankle_z - 0.055)\n for i, az in enumerate(np.linspace(-180, 180, nu_lg, endpoint=False)):\n for j, z_val in enumerate(np.linspace(ul[2] + 0.03, z_breech_bot, nv_lg)):\n br_g[i, j] = leg_ray(z_val, az, lift=0.0065)\n add(f\"breeches_{side_nm}\", \"doublet\",\n _grid_shell_in_blender(f\"Breech{side_nm}\", br_g, 0.0025, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"trousers\")\n\n # Dark Espresso Leather Cavalier Boot / Thigh Cuisse Cuff (knee + 9 cm all the way down into boot foot!)\n bt_g = np.zeros((26, 14, 3))\n z_boot_bot = max(0.032, ankle_z - 0.062)\n for i, az in enumerate(np.linspace(-180, 180, 26, endpoint=False)):\n v_notch = 0.022 * max(0.0, math.cos(math.radians(az))) # subtle cavalier V-peak at front thigh!\n for j, t in enumerate(np.linspace(0, 1, 14)):\n zz = (knee_z + 0.085 + v_notch) * (1 - t) + z_boot_bot * t\n cuff_flare = 0.012 * max(0.0, 0.25 - t) * 4.0\n bt_g[i, j] = leg_ray(zz, az, lift=0.0115 + cuff_flare)\n add(f\"cavalier_boot_{side_nm}\", \"boot\",\n _grid_shell_in_blender(f\"Boot{side_nm}\", bt_g, 0.0035, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"boots\")\n add(f\"boot_top_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"BootG{side_nm}\", bt_g[:, 0], 0.0028, True),\n f\"uleg_{side_nm}\", \"boots\")\n\n # Sculpted Winged Steel Poleyn (faceted knee cop + swept outer side-wing!)\n pol_g = np.zeros((17, 7, 3))\n for i, az in enumerate(np.linspace(-112, 112, 17)):\n wing_ext = 0.032 * max(0.0, math.sin(math.radians(az * sx))) ** 1.5\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 36.0) ** 1.5\n for j, s in enumerate(np.linspace(-1.0, 1.0, 7)):\n zz = knee_z + 0.012 - s * (0.058 + 0.5 * wing_ext)\n pol_g[i, j] = leg_ray(zz, az, lift=0.018 + keel * (1.0 - 0.6 * s * s) + wing_ext * (1.0 - 0.4 * s * s))\n add(f\"poleyn_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Poleyn{side_nm}\", pol_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n pol_rim = np.vstack([pol_g[:, 0], pol_g[-1, 1:], pol_g[::-1, -1], pol_g[0, -2::-1]])\n add(f\"poleyn_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"PolGold{side_nm}\", pol_rim, 0.0028, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # Anatomically Contoured Fluted Steel Shin-Greave (front + outer calf shell with crisp shin keel!)\n grv_g = np.zeros((21, 10, 3))\n for i, az in enumerate(np.linspace(-118, 118, 21)):\n shin_keel = 0.010 * max(0.0, 1.0 - abs(az) / 26.0) ** 1.6\n for j, t in enumerate(np.linspace(0, 1, 10)):\n zz = (knee_z - 0.048) * (1 - t) + (ankle_z + 0.032) * t\n grv_g[i, j] = leg_ray(zz, az, lift=0.0155 + shin_keel)\n add(f\"fluted_greave_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Greave{side_nm}\", grv_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n grv_rim = np.vstack([grv_g[:, 0], grv_g[-1, 1:], grv_g[::-1, -1], grv_g[0, -2::-1]])\n add(f\"greave_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"GrvGold{side_nm}\", grv_rim, 0.0028, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # 4-Lame Articulated Pointed-Almond Steel Sabaton + Heeled Dark Leather Riding Boot Sole (100% enclosed!)\n heel_y = ft[1] - 0.048\n toe_y = tb[1] + 0.088\n foot_cx = ft[0]\n # Enclosed leather boot base + heel resting cleanly on Z = 0, rising high enough to overlap cavalier shaft!\n nu_f0, nv_f0 = 24, 10\n fbase_g = np.zeros((nu_f0, nv_f0, 3))\n for i, th in enumerate(np.linspace(0, 2 * math.pi, nu_f0, endpoint=False)):\n for j, s in enumerate(np.linspace(0, 1, nv_f0)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.62 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = 0.050 * taper_toe\n hz = 0.056 * (1.0 - 0.56 * s)\n zc = 0.050 * (1.0 - 0.46 * s)\n px = foot_cx + hw * math.cos(th)\n pz = max(0.002, zc + hz * math.sin(th))\n fbase_g[i, j] = [px, yy, pz]\n add(f\"boot_foot_{side_nm}\", \"boot\", _grid_shell_in_blender(f\"BootFoot{side_nm}\", fbase_g, 0.003, 1, cyclic_u=True),\n f\"foot_{side_nm}\", \"boots\")\n\n # 3 Overlapping Dorsal Steel Sabaton Lames over the instep!\n for sl_i in range(3):\n sab_g = np.zeros((15, 4, 3))\n s0 = 0.16 + sl_i * 0.24\n s1 = s0 + 0.28\n for i, u_a in enumerate(np.linspace(-85, 85, 15)):\n ur = math.radians(u_a)\n keel = 0.007 * max(0.0, 1.0 - abs(u_a) / 30.0)\n for j, s in enumerate(np.linspace(s0, min(0.98, s1), 4)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.58 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = (0.055 + sl_i * 0.0018) * taper_toe\n hz = (0.060 + sl_i * 0.0018) * (1.0 - 0.52 * s)\n zc = 0.050 * (1.0 - 0.46 * s)\n sab_g[i, j] = [foot_cx + hw * math.sin(ur), yy, zc + hz * math.cos(ur) + keel]\n add(f\"sabaton_lame_{side_nm}_{sl_i}\", \"steel\",\n _grid_shell_in_blender(f\"Sab{side_nm}{sl_i}\", sab_g, 0.0035, 1), f\"foot_{side_nm}\", \"plate\")", "Target": " # Tailored dark breeches from hip to ankle\n nu_lg, nv_lg = 26, 16\n br_g = np.zeros((nu_lg, nv_lg, 3))\n for i, az in enumerate(np.linspace(-180, 180, nu_lg, endpoint=False)):\n for j, z_val in enumerate(np.linspace(ul[2] + 0.03, ankle_z + 0.02, nv_lg)):\n br_g[i, j] = leg_ray(z_val, az, lift=0.0045)\n add(f\"breeches_{side_nm}\", \"doublet\",\n _grid_shell_in_blender(f\"Breech{side_nm}\", br_g, 0.0025, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"trousers\")\n\n # Dark Espresso Leather Cavalier Boot / Thigh Cuisse Cuff (knee + 9 cm down to ankle)\n bt_g = np.zeros((26, 12, 3))\n for i, az in enumerate(np.linspace(-180, 180, 26, endpoint=False)):\n v_notch = 0.022 * max(0.0, math.cos(math.radians(az))) # subtle cavalier V-peak at front thigh!\n for j, t in enumerate(np.linspace(0, 1, 12)):\n zz = (knee_z + 0.085 + v_notch) * (1 - t) + (ankle_z + 0.01) * t\n cuff_flare = 0.012 * max(0.0, 0.25 - t) * 4.0\n bt_g[i, j] = leg_ray(zz, az, lift=0.0085 + cuff_flare)\n add(f\"cavalier_boot_{side_nm}\", \"boot\",\n _grid_shell_in_blender(f\"Boot{side_nm}\", bt_g, 0.0035, 1, cyclic_u=True), f\"leg_skin_{side_nm}\", \"boots\")\n add(f\"boot_top_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"BootG{side_nm}\", bt_g[:, 0], 0.0025, True),\n f\"uleg_{side_nm}\", \"boots\")\n\n # Sculpted Winged Steel Poleyn (faceted knee cop + swept outer side-wing!)\n pol_g = np.zeros((17, 7, 3))\n for i, az in enumerate(np.linspace(-112, 112, 17)):\n wing_ext = 0.032 * max(0.0, math.sin(math.radians(az * sx))) ** 1.5\n keel = 0.014 * max(0.0, 1.0 - abs(az) / 36.0) ** 1.5\n for j, s in enumerate(np.linspace(-1.0, 1.0, 7)):\n zz = knee_z + 0.012 - s * (0.058 + 0.5 * wing_ext)\n pol_g[i, j] = leg_ray(zz, az, lift=0.015 + keel * (1.0 - 0.6 * s * s) + wing_ext * (1.0 - 0.4 * s * s))\n add(f\"poleyn_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Poleyn{side_nm}\", pol_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n pol_rim = np.vstack([pol_g[:, 0], pol_g[-1, 1:], pol_g[::-1, -1], pol_g[0, -2::-1]])\n add(f\"poleyn_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"PolGold{side_nm}\", pol_rim, 0.0025, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # Anatomically Contoured Fluted Steel Shin-Greave (front + outer calf shell with crisp shin keel!)\n grv_g = np.zeros((21, 10, 3))\n for i, az in enumerate(np.linspace(-118, 118, 21)):\n shin_keel = 0.010 * max(0.0, 1.0 - abs(az) / 26.0) ** 1.6\n for j, t in enumerate(np.linspace(0, 1, 10)):\n zz = (knee_z - 0.048) * (1 - t) + (ankle_z + 0.042) * t\n grv_g[i, j] = leg_ray(zz, az, lift=0.012 + shin_keel)\n add(f\"fluted_greave_{side_nm}\", \"steel\", _grid_shell_in_blender(f\"Greave{side_nm}\", grv_g, 0.0045, 1),\n f\"lleg_{side_nm}\", \"plate\")\n grv_rim = np.vstack([grv_g[:, 0], grv_g[-1, 1:], grv_g[::-1, -1], grv_g[0, -2::-1]])\n add(f\"greave_gold_{side_nm}\", \"gold\", _curve_pipe_in_blender(f\"GrvGold{side_nm}\", grv_rim, 0.0026, True),\n f\"lleg_{side_nm}\", \"plate\")\n\n # 4-Lame Articulated Pointed-Almond Steel Sabaton + Heeled Dark Leather Riding Boot Sole (100% enclosed!)\n heel_y = ft[1] - 0.048\n toe_y = tb[1] + 0.088\n foot_cx = ft[0]\n # Enclosed leather boot base + heel resting cleanly on Z = 0\n nu_f0, nv_f0 = 24, 10\n fbase_g = np.zeros((nu_f0, nv_f0, 3))\n for i, th in enumerate(np.linspace(0, 2 * math.pi, nu_f0, endpoint=False)):\n for j, s in enumerate(np.linspace(0, 1, nv_f0)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.62 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = 0.048 * taper_toe\n hz = 0.044 * (1.0 - 0.52 * s)\n zc = 0.042 * (1.0 - 0.42 * s)\n px = foot_cx + hw * math.cos(th)\n pz = max(0.002, zc + hz * math.sin(th))\n fbase_g[i, j] = [px, yy, pz]\n add(f\"boot_foot_{side_nm}\", \"boot\", _grid_shell_in_blender(f\"BootFoot{side_nm}\", fbase_g, 0.003, 1, cyclic_u=True),\n f\"foot_{side_nm}\", \"boots\")\n\n # 3 Overlapping Dorsal Steel Sabaton Lames over the instep!\n for sl_i in range(3):\n sab_g = np.zeros((15, 4, 3))\n s0 = 0.16 + sl_i * 0.24\n s1 = s0 + 0.28\n for i, u_a in enumerate(np.linspace(-85, 85, 15)):\n ur = math.radians(u_a)\n keel = 0.007 * max(0.0, 1.0 - abs(u_a) / 30.0)\n for j, s in enumerate(np.linspace(s0, min(0.98, s1), 4)):\n yy = heel_y * (1 - s) + toe_y * s\n taper_toe = (1.0 - 0.58 * max(0.0, (s - 0.55) / 0.45) ** 1.5)\n hw = (0.052 + sl_i * 0.0015) * taper_toe\n hz = (0.049 + sl_i * 0.0015) * (1.0 - 0.48 * s)\n zc = 0.042 * (1.0 - 0.42 * s)\n sab_g[i, j] = [foot_cx + hw * math.sin(ur), yy, zc + hz * math.cos(ur) + keel]\n add(f\"sabaton_lame_{side_nm}_{sl_i}\", \"steel\",\n _grid_shell_in_blender(f\"Sab{side_nm}{sl_i}\", sab_g, 0.0035, 1), f\"foot_{side_nm}\", \"plate\")" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 994 (+22/-20 lines).
edit_file{"Path":"~/work/lowmarch/tools/build_adversarial.py","Replacement":" # Stepped 12 fps idle loop on twos (13 keys @ 1/6 s = 2.0 s, STEP interpolation)\n idle_keys = []\n for fr in range(0, 25, 2):\n t = fr / 12.0\n ph_q = 2.0 * math.pi * (fr / 24.0)\n p_fr = make_guard(\n hip_dy=-0.058 + 0.007 * math.sin(ph_q),\n torso_twist=-11.0 + 1.8 * math.sin(ph_q),\n sword_lift=0.014 * math.sin(ph_q - 0.4),\n shield_brace=0.008 * math.cos(ph_q),\n )\n idle_keys.append((round(t, 5), p_fr))","Target":" # Stepped 12 fps idle loop (24 frames @ 1/12 s = 2.0 s)\n idle_keys = []\n for fr in range(25):\n t = fr / 12.0\n ph = 2.0 * math.pi * (fr / 24.0)\n # Quantize phase on twos (classic anime 12 fps / 6s cadence!)\n ph_q = 2.0 * math.pi * ((fr // 2) * 2 / 24.0)\n p_fr = make_guard(\n hip_dy=-0.058 + 0.007 * math.sin(ph_q),\n torso_twist=-11.0 + 1.8 * math.sin(ph_q),\n sword_lift=0.014 * math.sin(ph_q - 0.4),\n shield_brace=0.008 * math.cos(ph_q),\n )\n idle_keys.append((round(t, 5), p_fr))"}
input
{ "Path": "~/work/lowmarch/tools/build_adversarial.py", "Replacement": " # Stepped 12 fps idle loop on twos (13 keys @ 1/6 s = 2.0 s, STEP interpolation)\n idle_keys = []\n for fr in range(0, 25, 2):\n t = fr / 12.0\n ph_q = 2.0 * math.pi * (fr / 24.0)\n p_fr = make_guard(\n hip_dy=-0.058 + 0.007 * math.sin(ph_q),\n torso_twist=-11.0 + 1.8 * math.sin(ph_q),\n sword_lift=0.014 * math.sin(ph_q - 0.4),\n shield_brace=0.008 * math.cos(ph_q),\n )\n idle_keys.append((round(t, 5), p_fr))", "Target": " # Stepped 12 fps idle loop (24 frames @ 1/12 s = 2.0 s)\n idle_keys = []\n for fr in range(25):\n t = fr / 12.0\n ph = 2.0 * math.pi * (fr / 24.0)\n # Quantize phase on twos (classic anime 12 fps / 6s cadence!)\n ph_q = 2.0 * math.pi * ((fr // 2) * 2 / 24.0)\n p_fr = make_guard(\n hip_dy=-0.058 + 0.007 * math.sin(ph_q),\n torso_twist=-11.0 + 1.8 * math.sin(ph_q),\n sword_lift=0.014 * math.sin(ph_q - 0.4),\n shield_brace=0.008 * math.cos(ph_q),\n )\n idle_keys.append((round(t, 5), p_fr))" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/build_adversarial.py starting at line 226 (+3/-5 lines).
agent
+1:31:54reasoning
Bounding box dimensions for hair_crown and hair_ponytail require verification before proceeding. A quick check will confirm the bounding boxes accurately represent head size (~26 cm). This step will validate the input data before the adversarial build process.
run_command{"CommandLine":"blender -b --factory-startup --python tools/blender_sculpt_cast.py -- ~/.cache/lowmarch_adv/valen_bl_in.npz ~/.cache/lowmarch_adv/valen_bl_out.npz valen >/dev/null && python3 -c '\nimport os, numpy as np\nd = np.load(os.path.expanduser(\"~/.cache/lowmarch_adv/valen_bl_out.npz\"), allow_pickle=True)\nfor x in d[\"pieces\"][:5]:\n p = x[2]\n print(x[0], \"tris:\", len(x[4]), \"min:\", np.round(p.min(0), 3), \"max:\", np.round(p.max(0), 3), \"span:\", np.round(np.ptp(p, 0), 3))\n'","WaitMsBeforeAsync":10000,"toolSummary":"Verify hair lock bounding boxes in Blender 5.2"}
input
{ "CommandLine": "blender -b --factory-startup --python tools/blender_sculpt_cast.py -- ~/.cache/lowmarch_adv/valen_bl_in.npz ~/.cache/lowmarch_adv/valen_bl_out.npz valen >/dev/null && python3 -c '\nimport os, numpy as np\nd = np.load(os.path.expanduser(\"~/.cache/lowmarch_adv/valen_bl_out.npz\"), allow_pickle=True)\nfor x in d[\"pieces\"][:5]:\n p = x[2]\n print(x[0], \"tris:\", len(x[4]), \"min:\", np.round(p.min(0), 3), \"max:\", np.round(p.max(0), 3), \"span:\", np.round(np.ptp(p, 0), 3))\n'", "WaitMsBeforeAsync": 10000, "toolSummary": "Verify hair lock bounding boxes in Blender 5.2" }result, 8 lines
Command exited with code 0. Command output: hair_crown tris: 81320 min: [-0.118 1.496 -0.164] max: [0.118 1.952 0.081] span: [0.237 0.456 0.245] hair_ponytail tris: 12040 min: [-0.194 1.402 0.046] max: [0.107 1.927 0.296] span: [0.3 0.525 0.25 ] hair_cuff tris: 480 min: [-0.04 -0.008 -0.04 ] max: [0.04 0.008 0.04 ] span: [0.081 0.016 0.081] hair_ribbon tris: 1336 min: [-0.095 1.648 0.08 ] max: [0.095 1.865 0.186] span: [0.19 0.217 0.106] arming_tunic tris: 2816 min: [-0.202 1.058 -0.191] max: [0.202 1.669 0.121] span: [0.405 0.611 0.312]
agent
+1:32:10reasoning
The dimensions of the hair_crown span precisely match head size, while hair_ponytail has different measurements. This suggests an accurate head size and separate ponytail measurement. This finding supports the initial assessment of good object sizing.
The hair_cuff was erroneously placed at the origin due to a transformation discrepancy. The primitive_torus_add function sets the object transform (cuff.matrix_world), while the subsequent mesh evaluation reads object-local vertex data. This indicates that object's position is not being properly translated to world space. Identified that other functions like primitive_cylinder_add also lack the world space transformation. Applying ob.matrix_world transforms the object's vertices from local to world space.
Initial tests show successful transformations for hair cuffs, belt buckles, and brooches, correctly positioning them based on their object coordinates. Further investigation revealed that the high triangle count in hair_crown resulted from a subdivision modifier inherited from a joined object (dome_ob), which improperly subdivided all joined locks. The problem traces back to the object join operation and modifier inheritance.
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" # Read custom split normals if present on evaluated mesh, else smooth vertex normals\n me_tri = bpy.data.meshes.new(\"_tmp_eval\")\n bm.to_mesh(me_tri)\n bm.free()\n if ob.matrix_world != Matrix.Identity(4):\n me_tri.transform(ob.matrix_world)","Target":" # Read custom split normals if present on evaluated mesh, else smooth vertex normals\n me_tri = bpy.data.meshes.new(\"_tmp_eval\")\n bm.to_mesh(me_tri)\n bm.free()"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " # Read custom split normals if present on evaluated mesh, else smooth vertex normals\n me_tri = bpy.data.meshes.new(\"_tmp_eval\")\n bm.to_mesh(me_tri)\n bm.free()\n if ob.matrix_world != Matrix.Identity(4):\n me_tri.transform(ob.matrix_world)", "Target": " # Read custom split normals if present on evaluated mesh, else smooth vertex normals\n me_tri = bpy.data.meshes.new(\"_tmp_eval\")\n bm.to_mesh(me_tri)\n bm.free()" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 62 (+2/-0 lines).
edit_file{"Path":"~/work/lowmarch/tools/blender_sculpt_cast.py","Replacement":" dome_ob = make_mesh_obj(\"HairDome\", np.array(d_verts), np.array(d_faces))\n for poly in dome_ob.data.polygons:\n poly.use_smooth = True\n hair_objs.append(dome_ob)","Target":" dome_ob = make_mesh_obj(\"HairDome\", np.array(d_verts), np.array(d_faces))\n for poly in dome_ob.data.polygons:\n poly.use_smooth = True\n sub = dome_ob.modifiers.new(\"Sub\", \"SUBSURF\")\n sub.levels = sub.render_levels = 1\n hair_objs.append(dome_ob)"}
input
{ "Path": "~/work/lowmarch/tools/blender_sculpt_cast.py", "Replacement": " dome_ob = make_mesh_obj(\"HairDome\", np.array(d_verts), np.array(d_faces))\n for poly in dome_ob.data.polygons:\n poly.use_smooth = True\n hair_objs.append(dome_ob)", "Target": " dome_ob = make_mesh_obj(\"HairDome\", np.array(d_verts), np.array(d_faces))\n for poly in dome_ob.data.polygons:\n poly.use_smooth = True\n sub = dome_ob.modifiers.new(\"Sub\", \"SUBSURF\")\n sub.levels = sub.render_levels = 1\n hair_objs.append(dome_ob)" }result, 1 line
Made 1 replacement in ~/work/lowmarch/tools/blender_sculpt_cast.py starting at line 397 (+0/-2 lines).
run_command{"CommandLine":"blender -b --factory-startup --python tools/blender_sculpt_cast.py -- ~/.cache/lowmarch_adv/valen_bl_in.npz ~/.cache/lowmarch_adv/valen_bl_out.npz valen >/dev/null && python3 -c '\nimport os, numpy as np\nd = np.load(os.path.expanduser(\"~/.cache/lowmarch_adv/valen_bl_out.npz\"), allow_pickle=True)\npcs = d[\"pieces\"]\nprint(\"Total Blender tris:\", sum(len(x[4]) for x in pcs))\nfor x in pcs:\n if x[0] in (\"hair_crown\", \"hair_ponytail\", \"hair_cuff\", \"belt_ring_buckle\", \"sunburst_brooch_0\"):\n p = x[2]\n print(f\" {x[0]:20s} tris={len(x[4]):5d} center={np.round(p.mean(0), 3)} span={np.round(np.ptp(p, 0), 3)}\")\n'","WaitMsBeforeAsync":10000,"toolSummary":"Verify transforms and triangle counts in Blender 5.2"}
input
{ "CommandLine": "blender -b --factory-startup --python tools/blender_sculpt_cast.py -- ~/.cache/lowmarch_adv/valen_bl_in.npz ~/.cache/lowmarch_adv/valen_bl_out.npz valen >/dev/null && python3 -c '\nimport os, numpy as np\nd = np.load(os.path.expanduser(\"~/.cache/lowmarch_adv/valen_bl_out.npz\"), allow_pickle=True)\npcs = d[\"pieces\"]\nprint(\"Total Blender tris:\", sum(len(x[4]) for x in pcs))\nfor x in pcs:\n if x[0] in (\"hair_crown\", \"hair_ponytail\", \"hair_cuff\", \"belt_ring_buckle\", \"sunburst_brooch_0\"):\n p = x[2]\n print(f\" {x[0]:20s} tris={len(x[4]):5d} center={np.round(p.mean(0), 3)} span={np.round(np.ptp(p, 0), 3)}\")\n'", "WaitMsBeforeAsync": 10000, "toolSummary": "Verify transforms and triangle counts in Blender 5.2" }result, 9 lines
Command exited with code 0. Command output: Total Blender tris: 166324 hair_crown tris=19148 center=[-1.000e-03 1.823e+00 -4.600e-02] span=[0.244 0.457 0.249] hair_ponytail tris=12040 center=[-0.019 1.704 0.195] span=[0.3 0.525 0.25 ] hair_cuff tris= 480 center=[-0. 1.867 0.078] span=[0.081 0.071 0.05 ] belt_ring_buckle tris= 320 center=[-0. 1.156 -0.159] span=[0.055 0.055 0.011] sunburst_brooch_0 tris= 68 center=[-0.101 1.512 -0.165] span=[0.04 0.041 0.028]
agent
+1:32:53reasoning
The model data reveals distinct mesh characteristics for the "hair_crown" and "hair_ponytail" components. Analyzing triangle count, center, and span provides a breakdown of each object's size and geometry, vital for understanding their relative placement and potential interactions in the complete scene. This information is key for verifying proper component integration.
run_command{"CommandLine":"python3 tools/build_adversarial.py","WaitMsBeforeAsync":10000,"toolSummary":"Run full adversarial build, GLB audit, and WebGL renders"}
input
{ "CommandLine": "python3 tools/build_adversarial.py", "WaitMsBeforeAsync": 10000, "toolSummary": "Run full adversarial build, GLB audit, and WebGL renders" }result, 37 lines
Command exited with code 0. Command output: 1/5 Building adversarial Valen (Blender 5.2 sculpt, 3D lock hair, gothic-anime armour, GLB)... 2/5 Building upgraded Korin (Blender 5.2 wolf-cut hair, northern pauldrons & fur mantle)... 3/5 Auditing ~/out/valen_finished.glb in headless Blender 5.2... GLB Audit: {'meshes': 114, 'verts': 91815, 'tris': 178967, 'bones': 59, 'actions': ['battle_guard', 'bust_ref', 'idle_breath_12fps', 'strike_combo_12fps'], 'materials': 113, 'images': 8} 4/5 Shooting After battle visual (~/out/battle_frame_after.png, 1920x1080 @ ss=2)... 5/5 Shooting 24 mm Perspective + Flattice showcase directly from valen_finished.glb... DONE! Timings: { "valen_clips_s": 23.24, "blender_valen_s": 2.01, "valen_tex_and_mask_s": 0.06, "export_glb_s": 10.56, "glb_size_bytes": 7312748, "valen_total_s": 39.83, "blender_korin_s": 1.31, "korin_total_s": 129.32, "glb_audit_s": 1.75, "glb_audit": { "meshes": 114, "verts": 91815, "tris": 178967, "bones": 59, "actions": [ "battle_guard", "bust_ref", "idle_breath_12fps", "strike_combo_12fps" ], "materials": 113, "images": 8 }, "render_after_battle_s": 13.3, "render_flattice_persp_s": 21.4, "pipeline_total_s": 205.63 }
agent
+1:33:15reasoning
I'm thinking through how to approach this.
Fixed two Blender curve evaluation details caught on inspection (Curve taper radius override mode and local-to-world transform on torus/brooch hardware) and relaunched the full end-to-end build and WebGL renders (tools/build_adversarial.py). Waiting for the render pass to finish so I can inspect both output frames and update ~/out/index.html.
resultCommand exited with code 0.
Command exited with code 0. Command output: 1/5 Building adversarial Valen (Blender 5.2 sculpt, 3D lock hair, gothic-anime armour, GLB)... 2/5 Building upgraded Korin (Blender 5.2 wolf-cut hair, northern pauldrons & fur mantle)... 3/5 Auditing ~/out/valen_finished.glb in headless Blender 5.2... GLB Audit: {'meshes': 114, 'verts': 91815, 'tris': 178967, 'bones': 59, 'actions': ['battle_guard', 'bust_ref', 'idle_breath_12fps', 'strike_combo_12fps'], 'materials': 113, 'images': 8} 4/5 Shooting After battle visual (~/out/battle_frame_after.png, 1920x1080 @ ss=2)... 5/5 Shooting 24 mm Perspective + Flattice showcase directly from valen_finished.glb... DONE! Timings: { "valen_clips_s": 23.24, "blender_valen_s": 2.01, "valen_tex_and_mask_s": 0.06, "export_glb_s": 10.56, "glb_size_bytes": 7312748, "valen_total_s": 39.83, "blender_korin_s": 1.31, "korin_total_s": 129.32, "glb_audit_s": 1.75, "glb_audit": { "meshes": 114, "verts": 91815, "tris": 178967, "bones": 59, "actions": [ "battle_guard", "bust_ref", "idle_breath_12fps", "strike_combo_12fps" ], "materials": 113, "images": 8 }, "render_after_battle_s": 13.3, "render_flattice_persp_s": 21.4, "pipeline_total_s": 205.63 } Log: file://~/.gemini/antigravity-cli/brain/d3ac2d6a-0d1c-453a-9076-391f374ef486/.system_generated/tasks/task-446.log
agent
+1:36:31reasoning
Initial suspicion was a cache miss, but traces show database latency is the actual bottleneck. The task completed successfully in an extremely short time compared to previous attempts. The dramatically reduced runtime validates the hypothesis that headless Blender performs significantly faster for this particular task.
read_file{"Path":"~/out/battle_frame_after.png"}
input
{ "Path": "~/out/battle_frame_after.png" }result, 1 line
Showing binary file of type image/png
read_file{"Path":"~/out/valen_flattice_persp.png"}
input
{ "Path": "~/out/valen_flattice_persp.png" }result, 1 line
Showing binary file of type image/png



