agent

+42:11
reasoning

The code filters 3D primitives based on hair trim, specifically excluding elements tagged with "_HAIR". Examining the logic, it seems this is intended to remove hair pieces extending beyond a certain boundary. If this fails, the issue could be with how hair is defined or handled in subsequent processing steps.

  • read_file{"EndLine":120,"Path":"~/work/lowmarch/tools/hair.py","StartLine":1}

    input

    {
      "EndLine": 120,
      "Path": "~/work/lowmarch/tools/hair.py",
      "StartLine": 1
    }

    result, 121 lines

    Showing lines 1-120 of 318
    1: """The hair kit: hair built as locks combed over the skull, instead of borrowing a VRoid sample's hair
    2: cards (portrait guide, lesson 14).
    3: 
    4: HeadChart  u = degrees round the head (0 front, +90 the character's right), v = degrees down from the
    5:            crown (0 top, 90 level with the skull's centre, ~130 the jaw): rays from the skull's centre
    6:            onto the head skin, smoothed into a shell (as plates.TorsoChart does for the body).
    7: cap        the hair's base volume: a shell over the scalp down to a hairline given as v(u).
    8: lock       one lock: a path of (u, v, lift) points over the head (lift = metres off the scalp), smoothed
    9:            and sampled, then swept with a flat lens-shaped section whose flat side lies along the head,
    10:            width tapering to a point. Past the chart's lower edge a path just continues in 3D.
    11: Every piece gets UVs (around, along) and shares one strand texture, so the painted renderer draws
    12: strand highlights along each lock; every piece rides the head bone.
    13: """
    14: import math
    15: 
    16: import numpy as np
    17: 
    18: from plates import _Chart, _fill_nan
    19: from scipy.ndimage import gaussian_filter
    20: 
    21: 
    22: class HeadChart(_Chart):
    23:     def __init__(self, head, centre, du=4.0, dv=3.0, v_max=150.0, smooth=(1.0, 1.0)):
    24:         self.c = np.asarray(centre, float)
    25:         self.wrap = True
    26:         self.u0, self.du, self.v0, self.dv, self.ev = -180.0, du, 0.0, dv, 0.8
    27:         us = np.arange(-180.0, 180.0, du)
    28:         vs = np.arange(0.0, v_max + dv * 0.5, dv)
    29:         R = np.full((len(us), len(vs)), np.nan)
    30:         for i, u in enumerate(us):
    31:             for j, v in enumerate(vs):
    32:                 o, d = self.ray(u, v)
    33:                 R[i, j] = head.cast(o, d, rmax=0.3, far=True)
    34:         R = _fill_nan(R, True)
    35:         self.R = gaussian_filter(R, smooth, mode=("wrap", "nearest"))
    36: 
    37:     def ray(self, u, v):
    38:         u, v = np.broadcast_arrays(np.asarray(u, float), np.asarray(v, float))
    39:         ur, vr = np.radians(u), np.radians(v)
    40:         d = np.stack([np.sin(vr) * np.sin(ur), np.cos(vr), -np.sin(vr) * np.cos(ur)], -1)
    41:         return np.broadcast_to(self.c, d.shape).copy(), d
    42: 
    43:     def centre(self, v=None):
    44:         return self.c
    45: 
    46:     @property
    47:     def L(self):
    48:         """Metres per degree of v (decals and seams measure plates on this chart in metres)."""
    49:         return float(np.mean(self.R)) * np.pi / 180
    50: 
    51:     def metric(self, u, v):
    52:         """(arc across, arc down) in metres, for seams and decals on helmets."""
    53:         r = self.radius(u, v)
    54:         return np.stack([np.radians(u) * r * np.sin(np.radians(np.asarray(v, float))), np.radians(v) * r + 0 * np.asarray(u, float)], -1)
    55: 
    56: 
    57: # ---- the shared strand texture: fine light and dark lines running along each lock -----------------
    58: def strand_texture(n=256, seed=3):
    59:     rng = np.random.default_rng(seed)
    60:     x = np.arange(n)
    61:     stripes = np.zeros(n)
    62:     for f, a in ((3, 0.18), (7, 0.12), (17, 0.10), (41, 0.06)):
    63:         stripes += a * np.sin(2 * np.pi * (f * x / n + rng.random()))
    64:     stripes += 0.08 * gaussian_filter(rng.standard_normal(n), 1.2, mode="wrap")
    65:     col = np.clip(0.62 + stripes, 0.25, 0.95)
    66:     along = 1.0 - 0.10 * np.linspace(0, 1, n)[:, None]           # a touch darker toward the tip
    67:     img = (np.repeat(col[None, :], n, 0) * along * 255).astype(np.uint8)
    68:     return np.dstack([img, img, img, np.full((n, n), 255, np.uint8)])
    69: 
    70: 
    71: STRANDS = strand_texture()
    72: 
    73: 
    74: def _smooth_path(P, n):
    75:     """Catmull-Rom through control points P (k, 3), sampled at n points."""
    76:     P = np.asarray(P, float)
    77:     if len(P) == 2:
    78:         return P[0] + (P[1] - P[0]) * np.linspace(0, 1, n)[:, None]
    79:     Q = np.vstack([2 * P[0] - P[1], P, 2 * P[-1] - P[-2]])
    80:     seg = len(P) - 1
    81:     out = []
    82:     for t in np.linspace(0, seg, n):
    83:         i = min(int(t), seg - 1)
    84:         s = t - i
    85:         p0, p1, p2, p3 = Q[i], Q[i + 1], Q[i + 2], Q[i + 3]
    86:         out.append(0.5 * ((2 * p1) + (-p0 + p2) * s + (2 * p0 - 5 * p1 + 4 * p2 - p3) * s * s
    87:                           + (-p0 + 3 * p1 - 3 * p2 + p3) * s ** 3))
    88:     return np.array(out)
    89: 
    90: 
    91: def lock(name, chart, path, width, thick=0.006, n=28, seg=10, taper=(0.45, 1.0), tip=0.04, flat_to=None,
    92:          role="hair", root_width=None, profile=None):
    93:     """A lock along `path`: (u, v, lift) points on the chart, or 3D points (arrays of length 3 with
    94:     a flag), mixed freely as ("uv", u, v, lift) / ("xyz", x, y, z). Width tapers from
    95:     taper[0] of the way along to a point at the end (tip: the last fraction kept a hair's width).
    96:     The flat side faces `flat_to` (a point the section looks away from; default the skull's centre)."""
    97:     from outfit import piece
    98:     pts = []
    99:     for p in path:
    100:         if p[0] == "uv":
    101:             _, u, v, lift = p
    102:             pts.append(chart.point(u, v, off=lift))
    103:         else:
    104:             pts.append(np.array(p[1:], float))
    105:     C = _smooth_path(pts, n)
    106:     T = np.gradient(C, axis=0)
    107:     T /= np.maximum(np.linalg.norm(T, axis=1, keepdims=True), 1e-9)
    108:     away = C - np.asarray(flat_to if flat_to is not None else chart.c, float)
    109:     N = away - T * np.einsum("ij,ij->i", away, T)[:, None]
    110:     N /= np.maximum(np.linalg.norm(N, axis=1, keepdims=True), 1e-9)
    111:     Bv = np.cross(T, N)
    112:     t = np.linspace(0, 1, n)
    113:     w0 = width if root_width is None else root_width
    114:     w = np.where(t < 0.12, w0 + (width - w0) * t / 0.12, width)
    115:     k = np.clip((t - taper[0]) / max(taper[1] - taper[0], 1e-6), 0, 1)
    116:     w = w * (1 - k ** 1.6) + tip * 0.01 * k
    117:     if profile is not None:                            # a clump: profile(t) = width as a fraction of `width`
    118:         w = width * np.array([profile(x) for x in t]) + 0.0004
    119:         k = np.clip((t - 0.6) / 0.4, 0, 1)
    120:     th = thick * np.maximum(1 - k ** 1.3, 0.15)
  • read_file{"EndLine":318,"Path":"~/work/lowmarch/tools/hair.py","StartLine":121}

    input

    {
      "EndLine": 318,
      "Path": "~/work/lowmarch/tools/hair.py",
      "StartLine": 121
    }

    result, 199 lines

    Showing lines 121-318 of 318
    121:     a = np.linspace(0, 2 * np.pi, seg + 1)
    122:     G = (C[:, None] + Bv[:, None] * (w[:, None] / 2 * np.cos(a)[None, :])[..., None]
    123:          + N[:, None] * (th[:, None] / 2 * np.sin(a)[None, :])[..., None])
    124:     from outfit import grid_mesh
    125:     pos, tri = grid_mesh(G)
    126:     pc = piece(name, role, pos, tri, outward_from=None)
    127:     from fitting import vertex_normals
    128:     fn = vertex_normals(pos, tri)
    129:     radial = (pos - np.repeat(C, seg + 1, 0))
    130:     if (np.einsum("ij,ij->i", fn, radial) < 0).mean() > 0.5:
    131:         pc["tri"] = tri[:, ::-1]
    132:         pc["nrm"] = -fn
    133:     uu, vv = np.meshgrid(a / (2 * np.pi), t, indexing="xy")
    134:     pc["uv"] = np.stack([uu.ravel(), vv.ravel()], 1)
    135:     pc["strands"] = True
    136:     pc["group"] = "hair"
    137:     return pc
    138: 
    139: 
    140: def cap(name, chart, hairline, lift=0.010, crown=0.006, nu=72, nv=26, role="hair"):
    141:     """The hair's base volume: a shell over the scalp from the crown down to hairline(u) (degrees of v),
    142:     lifted `lift` off the scalp plus `crown` more at the top."""
    143:     from outfit import piece, grid_mesh
    144:     U = np.linspace(-180, 180, nu)
    145:     G = np.zeros((nu, nv, 3))
    146:     UV = np.zeros((nu, nv, 2))
    147:     for i, u in enumerate(U):
    148:         vmax = hairline(u)
    149:         for j, s in enumerate(np.linspace(0, 1, nv)):
    150:             v = vmax * s                                    # from the crown itself (a gap there showed as a dot)
    151:             G[i, j] = chart.point(u, v, off=lift + crown * (1 - s) ** 2)
    152:             UV[i, j] = (i / (nu - 1) * 6, s)                # strands run from the crown down (u repeats)
    153:     pos, tri = grid_mesh(G)
    154:     pc = piece(name, role, pos, tri, outward_from=chart.c)
    155:     pc["uv"] = UV.reshape(-1, 2)
    156:     pc["strands"] = True
    157:     pc["group"] = "hair"
    158:     return pc
    159: 
    160: 
    161: # ---- hairstyles -----------------------------------------------------------------------------------
    162: def head_chart(fit, ear_x=None):
    163:     """The chart over this body's skull, centred in the head skin's bounding box. The ears are left
    164:     out (triangles further than ear_x to the side, by default 0.835 of the head's half width, 8.6 cm
    165:     on the VRoid heads): cast onto them, every lock passing the sides was pushed out past the ears and
    166:     the hair became a bowl."""
    167:     from fitting import Surface
    168:     head = fit.head_surface()
    169:     P = head.pos[np.unique(head.tri)]
    170:     centre = (P.min(0) + P.max(0)) / 2
    171:     if ear_x is None:
    172:         ear_x = min(0.086, 0.835 * float(P[:, 0].max() - centre[0]))
    173:     cx = head.pos[head.tri].mean(1)[:, 0]
    174:     skull = Surface(head.pos, head.tri[np.abs(cx - centre[0]) < ear_x])
    175:     return HeadChart(skull, centre)
    176: 
    177: 
    178: def clump(t, widest=0.55, root=0.42, point=1.6):
    179:     """A bang's width along it, as a fraction of its widest: it grows out of the hair mass, is widest
    180:     past its middle, then comes to a point."""
    181:     if t < widest:
    182:         return root + (1 - root) * math.sin(math.pi / 2 * t / widest)
    183:     return max(0.0, 1 - ((t - widest) / (1 - widest)) ** point) ** 0.9
    184: 
    185: 
    186: def elaine(fit):
    187:     """Elaine's hair: a short bob with side-swept bangs, side locks framing the face, the back down to
    188:     the nape; her bun, braid and ribbon (outfit.updo) sit on top, and one upright strand curls forward
    189:     from the crown.
    190:     The bangs follow a study of Unicorn Overlord's character art (lesson 14): a few clumps of clearly
    191:     different widths and lengths fanning from a part off the centre, widest past their middle, a thin
    192:     strand or two between them; not a row of matching points (the user found seven of them jarring)."""
    193:     ch = head_chart(fit)
    194:     # the hairline: low at the nape (about the earlobe's bottom), and down in front of the ear over the
    195:     # temple (the base's untextured temple skin showed as a white triangle there)
    196:     out = [cap("hair_cap", ch, lambda u: float(np.interp(abs(u), [0, 40, 60, 75, 90, 110, 130, 150, 180],
    197:                                                          [56, 62, 76, 100, 108, 110, 126, 140, 146])),
    198:                lift=0.007, crown=0.009)]
    199:     part = -24.0                                        # over her left eye
    200:     bangs = [  # name, path of (u, v, lift), widest width, (where widest, root fraction)
    201:         ("sweep", [(part + 4, 34, 0.006), (0, 60, 0.014), (20, 84, 0.017), (33, 96, 0.016)], 0.050, (0.50, 0.40)),
    202:         ("sweep_back", [(part + 12, 40, 0.005), (16, 64, 0.011), (40, 86, 0.013), (50, 95, 0.012)], 0.036, (0.55, 0.40)),
    203:         ("fall", [(part, 34, 0.006), (part - 1, 64, 0.016), (-10, 90, 0.019), (-5, 103, 0.018)], 0.030, (0.50, 0.45)),
    204:         ("left", [(part - 6, 36, 0.006), (part - 16, 64, 0.013), (-42, 88, 0.016), (-48, 97, 0.015)], 0.036, (0.55, 0.45)),
    205:         ("strand_r", [(part + 8, 42, 0.005), (8, 70, 0.018), (14, 99, 0.020)], 0.011, (0.35, 0.6)),
    206:         ("strand_l", [(-46, 48, 0.006), (-55, 76, 0.016), (-57, 98, 0.017)], 0.012, (0.35, 0.6)),
    207:     ]
    208:     for nm, path, w, (widest, root) in bangs:
    209:         out.append(lock(f"hair_bang_{nm}", ch, [("uv", *p) for p in path], width=w, thick=0.008, n=32,
    210:                         profile=lambda t, a=widest, b=root: clump(t, a, b)))
    211:     # side locks: one in front of the ear down to the jaw, one over the ear's top
    212:     for s, side in ((1, "R"), (-1, "L")):
    213:         out.append(lock(f"hair_side{side}0", ch, [("uv", s * 50, 24, 0.008), ("uv", s * 68, 68, 0.012),
    214:                                                    ("uv", s * 70, 108, 0.013), ("uv", s * 64, 140, 0.011)],
    215:                         width=0.030, thick=0.007, taper=(0.5, 1.0), root_width=0.013))
    216:         out.append(lock(f"hair_side{side}1", ch, [("uv", s * 84, 40, 0.005), ("uv", s * 100, 70, 0.012),
    217:                                                    ("uv", s * 108, 104, 0.012), ("uv", s * 112, 122, 0.010)],
    218:                         width=0.032, thick=0.008, taper=(0.55, 1.0), root_width=0.015))
    219:     # the back: locks from the crown down to the nape, overlapping
    220:     for k, u in enumerate((112, 132, 152, 172, 192, 212, 232, 252)):
    221:         side = abs(u - 180) / 68                      # 1 at the sides, 0 at the middle of the back
    222:         sw = (1 if u < 180 else -1) * 22 * side       # sweep toward the nape as they fall
    223:         out.append(lock(f"hair_back{k}", ch, [("uv", u, 30, 0.005), ("uv", u + sw * 0.2, 62, 0.010 + 0.006 * (1 - side)),
    224:                                               ("uv", u + sw * 0.6, 98, 0.010 + 0.004 * (1 - side)),
    225:                                               ("uv", u + sw, 146 - 14 * side, 0.008)],
    226:                         width=0.050, thick=0.009, taper=(0.75, 1.0), tip=0.3, root_width=0.020))
    227:     # the upright strand: from the crown, up and curling forward; flat side to the side
    228:     root = ch.point(0, 6, off=0.010)
    229:     up = np.array([0, 1.0, 0])
    230:     fwd = np.array([0, 0, -1.0])
    231:     out.append(lock("hair_ahoge", ch, [("xyz", *root), ("xyz", *(root + up * 0.030 - fwd * 0.004)),
    232:                                         ("xyz", *(root + up * 0.055 + fwd * 0.012)),
    233:                                         ("xyz", *(root + up * 0.050 + fwd * 0.040)),
    234:                                         ("xyz", *(root + up * 0.036 + fwd * 0.052))],
    235:                     width=0.016, thick=0.004, taper=(0.35, 1.0), flat_to=ch.c + np.array([-1.0, 0, 0]), n=24))
    236:     for pc in out:
    237:         fit.bind(pc, rigid="J_Bip_C_Head")
    238:     return out
    239: 
    240: 
    241: # ---- facial hair -----------------------------------------------------------------------------------------
    242: def _face_marks(ch, head, mouth=None):
    243:     """Chart angles of the chin (the front's lowest point) and the mouth: the mouth's own centre when
    244:     given (a long face puts it well over 13 degrees above the chin), else 13 degrees above the chin."""
    245:     P = head.pos[np.unique(head.tri)]
    246:     front = P[(np.abs(P[:, 0] - ch.c[0]) < 0.012) & (P[:, 2] < ch.c[2] - 0.04)]
    247:     chin = front[np.argmin(front[:, 1])]
    248: 
    249:     def angle(q):
    250:         d = q - ch.c
    251:         return float(np.degrees(np.arccos(np.clip(d[1] / np.linalg.norm(d), -1, 1))))
    252:     v_chin = angle(chin)
    253:     return v_chin, (angle(mouth) if mouth is not None else v_chin - 13.0)
    254: 
    255: 
    256: def beard(fit, style="full", role="hair", length=0.0):
    257:     """Facial hair on the head chart. style: 'full' (jaw, chin and cheeks, open round the mouth, with a
    258:     moustache), 'short' (close-cropped, the same outline), 'goatee' (chin and moustache), 'moustache'.
    259:     length: metres of beard hanging below the chin (locks)."""
    260:     from plates import outline_plate
    261:     ch = head_chart(fit)
    262:     head = fit.head_surface()
    263:     mouth = [p["pos"][np.unique(p["tri"])] for p, r in zip(fit._prims, fit._roles) if r == "mouth" and len(p["tri"])]
    264:     v_chin, v_mouth = _face_marks(ch, head, np.concatenate(mouth).mean(0) if mouth and getattr(fit, "cloth_hull", False) else None)
    265:     out = []
    266:     thick = 0.022 if style == "full" else 0.009
    267:     if style in ("full", "short"):
    268:         def top(u):
    269:             a = abs(u)
    270:             if a < 22:
    271:                 return v_mouth + 8.0
    272:             if a < 62:
    273:                 return v_mouth + 8.0 - (v_mouth + 8.0 - 110.0) * ((a - 22) / 40) ** 0.8
    274:             return 110.0 - 14.0 * min(1.0, (a - 62) / 30)
    275:         bottom = lambda u: min(149.0, v_chin + 7.0 - 3.0 * (abs(u) / 95))
    276:         fl = lambda u, v, s, t: thick * (1 - t) ** 0.7 * (0.6 + 0.4 * math.cos(math.radians(u)))
    277:         # solid: filled from its outer face down to the face (a shell standing off the jaw read as paper
    278:         # from below and from the side; the study draws beards as one mass)
    279:         pc, _ = outline_plate("beard", role, ch, -96, 96, bottom, top, offset=0.004, flare=fl,
    280:                               thickness=lambda u, v, s, t: 0.003 + fl(u, v, s, t), nu=48, nv=14, roll=0,
    281:                               pattern=(STRANDS, 0.03))
    282:         out.append(pc)
    283:     if style == "goatee":
    284:         pc, _ = outline_plate("beard", role, ch, -22, 22, lambda u: min(149.0, v_chin + 6.0), lambda u: v_mouth + 8.0,
    285:                               offset=0.004, flare=lambda u, v, s, t: 0.010 * (1 - t),
    286:                               thickness=lambda u, v, s, t: 0.003 + 0.010 * (1 - t), nu=20, nv=10, roll=0,
    287:                               pattern=(STRANDS, 0.03))
    288:         out.append(pc)
    289:     if style in ("full", "short", "goatee", "moustache"):          # the moustache: two locks from under the nose
    290:         for s in (-1, 1):
    291:             out.append(lock(f"moustache{(s + 1) // 2}", ch, [("uv", s * 2, v_mouth - 7, 0.006), ("uv", s * 14, v_mouth - 4, 0.010),
    292:                                                              ("uv", s * 26, v_mouth + 3, 0.009)],
    293:                             width=0.016 if style != "short" else 0.010, thick=0.006, n=16, taper=(0.5, 1.0)))
    294:     if length > 0 and style in ("full", "goatee"):                  # the beard's fall below the chin
    295:         # one solid mass, wide at the jaw and tapering to a point (three thin locks read as a ruff, and
    296:         # a mass that stayed wide read as a bib)
    297:         p0 = ch.point(0, v_chin + 4, off=0.015) + np.array([0.0, 0.006, -0.006])
    298:         full = style == "full"
    299:         out.append(lock("beard_fall", ch, [("xyz", *p0), ("xyz", *(p0 + np.array([0, -length * 0.55, -0.010]))),
    300:                                            ("xyz", *(p0 + np.array([0, -length, -0.004])))],
    301:                         width=0.080 if full else 0.045, thick=0.026 if full else 0.018, n=16, seg=16,
    302:                         flat_to=p0 + np.array([0, 0, 0.3]), profile=lambda t: (1 - t) ** 1.1))   # a spade, to a point
    303:     for pc in out:
    304:         if "decal" in pc:                                           # the strand texture, not a decal
    305:             pc.pop("decal")
    306:         pc["strands"] = True
    307:         pc["group"] = "hair"
    308:         fit.bind(pc, rigid="J_Bip_C_Head")
    309:     return out
    310: 
    311: 
    312: def crop(fit, lift=0.006, front=58.0, back=122.0):
    313:     """A short crop: the cap alone, a hairline from the forehead (v=front) round to the nape (v=back)."""
    314:     ch = head_chart(fit)
    315:     hl = lambda u: float(np.interp(abs(u), [0, 50, 80, 105, 130, 180], [front, front + 6, front + 34, front + 40, back - 6, back]))
    316:     pc = cap("hair_cap", ch, hl, lift=lift, crown=0.004)
    317:     fit.bind(pc, rigid="J_Bip_C_Head")
    318:     return [pc]

agent

+42:26
reasoning

Initial analysis of hair.py reveals the use of a HeadChart and cap function to ensure scalp coverage. It then proceeds to append hair locks, grouping them and binding to the fit. The flow appears similar to how outfit.py replaces clothing items.

  • run_command{"CommandLine":"grep -n \"hair\" tools/outfit.py","WaitMsBeforeAsync":10000,"toolSummary":"Search tools/outfit.py for hair handling"}

    input

    {
      "CommandLine": "grep -n \"hair\" tools/outfit.py",
      "WaitMsBeforeAsync": 10000,
      "toolSummary": "Search tools/outfit.py for hair handling"
    }

    result, 14 lines

    Command exited with code 0.
    
    Command output:
    185:        """The head's skin (face and scalp), for charts over the skull (tools/hair.py)."""
    818:# ---- dress, hairdo -------------------------------------------------------------------------
    858:def updo(fit, hair_role="hair", ribbon_role="signature"):
    867:    out.append(ball("bun", hair_role, c, 0.046 * hs, seg=20, rows=12, squash=(1.0, 0.86, 0.72)))
    876:        out.append(pipe(f"braid{k}", hair_role, pts, r=0.0085 * hs, seg=7, closed=True))
    887:    st = pipe("cowlick", hair_role, pts, r=0.013 * hs, seg=10)
    896:        pc["group"] = "hair"
    945:    gold hilt, and her hair up in a braided bun with a ribbon."""
    1034:    if not any(r == "hair" for r in fit._roles):
    1035:        import hair
    1036:        out += [pc for pc in updo(fit) if pc["material"] != "OUTFIT_cowlick"] + hair.elaine(fit)

agent

+42:35
reasoning

The code filters hair primitives based on the hair_trim parameter. Specifically, it removes primitives where the material name contains "_HAIR." This suggests a mechanism for selectively removing hair components, potentially for trimming or styling purposes within a 3D model.

</material>" or p["material"].startswith("Hair_")]

The code's condition, np.abs(p["pos"][np.unique(p["tri"]), 0]).max() <= hair_trim, combined with hair_trim = -1, unexpectedly removes ALL hair pieces from the model, indicating a potential logic error in the hair filtering process. The hair.elaine implementation's use of a scalp cap, generated by HeadChart, is designed to prevent scalp penetration by raising the cap. This contrasts with previous methods that used fixed sphere offsets, which could lead to inaccurate placement relative to the skull.

The blender_sculpt_lead.py script attempts to utilize the HeadChart functionality to accurately position sculpted elements on the head's surface, as the script originally couldn't use HeadChart. It appears a scipy dependency prevented direct import, thus preventing that from working. However, the use of scipy.ndimage.gaussian_filter in HeadChart can be replaced with an efficient NumPy implementation.

A Blender-native raycaster, mathutils.bvhtree.BVHTree.FromBMesh, offers a viable and performant method to access the sculpted head mesh directly within Blender. This offers an alternative method to using HeadChart.

The Blender environment enables direct access to the sculpted head mesh via BVHTree.FromPolygons. This allows raycasting from the skull center along spherical coordinates (azimuth and polar angle). This eliminates scalp penetration by lifting scalp cap vertices a specific distance from the sculpted skull. It provides precise control over sculpted element placement.

  • run_command{"CommandLine":"blender -b --python-expr '\nimport sys, numpy as np\nfrom mathutils import Vector\nfrom mathutils.bvhtree import BVHTree\nsys.path[:0] = [\"tools\"]\nfrom vrm import VRM\nv = VRM(\"review/out/vroid-02/cache/elaine_argon_sculpt.vrm\")\nprims = v.primitives()\nhead_p = [p for p in prims if \"Face\" in p[\"material\"] or \"Body\" in p[\"material\"]]\nbrow_p = [p for p in prims if \"Brow\" in p[\"material\"]][0]\npos = brow_p[\"pos\"][np.unique(brow_p[\"tri\"])]\nprint(\"Brow y range:\", pos[:,1].min(), pos[:,1].max(), \"x range:\", pos[:,0].min(), pos[:,0].max(), \"z range:\", pos[:,2].min(), pos[:,2].max())\n'","WaitMsBeforeAsync":10000,"toolSummary":"Check eyebrow coordinates on sculpted Elaine VRM in Blender"}

    input

    {
      "CommandLine": "blender -b --python-expr '\nimport sys, numpy as np\nfrom mathutils import Vector\nfrom mathutils.bvhtree import BVHTree\nsys.path[:0] = [\"tools\"]\nfrom vrm import VRM\nv = VRM(\"review/out/vroid-02/cache/elaine_argon_sculpt.vrm\")\nprims = v.primitives()\nhead_p = [p for p in prims if \"Face\" in p[\"material\"] or \"Body\" in p[\"material\"]]\nbrow_p = [p for p in prims if \"Brow\" in p[\"material\"]][0]\npos = brow_p[\"pos\"][np.unique(brow_p[\"tri\"])]\nprint(\"Brow y range:\", pos[:,1].min(), pos[:,1].max(), \"x range:\", pos[:,0].min(), pos[:,0].max(), \"z range:\", pos[:,2].min(), pos[:,2].max())\n'",
      "WaitMsBeforeAsync": 10000,
      "toolSummary": "Check eyebrow coordinates on sculpted Elaine VRM in Blender"
    }

    result, 8 lines

    Command exited with code 0.
    
    Command output:
    Blender 5.2.3 LTS (hash e13b728c6880 built 2026-10-22 01:35:05)
    00:00.099  system.path      | WARNING Could not get a list of mounted file-systems
    Brow y range: 1.7176417112350464 1.7420341968536377 x range: -0.0686139315366745 0.0686139166355133 z range: -0.14538460969924927 -0.1208082064986229
    
    Blender quit

agent

+43:03
reasoning

The eyebrow coordinates from the VRM model are now available. These numerical values need to be mapped onto the corresponding (u, v) angles on the skull chart to understand their positions relative to the skull. A quick Python script will be used to perform this coordinate mapping and confirm the relationship within one second.

  • run_command{"CommandLine":"python3 -c '\nimport sys, numpy as np\nsys.path[:0] = [\"tools\"]\nfrom vrm import VRM\nimport vroid_portrait as vp\nimport outfit, hair\n\nfor nm, path in [(\"elaine\", \"review/out/vroid-02/cache/elaine_argon_sculpt.vrm\"), (\"aldric\", \"review/out/vroid-02/cache/aldric_argon_sculpt.vrm\")]:\n v = VRM(path)\n prims = v.primitives()\n roles = [vp.role_of(p[\"material\"]) for p in prims]\n fit = outfit.Fit(v, {}, prims, roles)\n ch = hair.head_chart(fit)\n brow = np.concatenate([p[\"pos\"][np.unique(p[\"tri\"])] for p, r in zip(prims, roles) if r == \"brow\"])\n d = brow - ch.c\n r = np.linalg.norm(d, axis=1)\n v_deg = np.degrees(np.arccos(np.clip(d[:,1]/r, -1, 1)))\n u_deg = np.degrees(np.arctan2(d[:,0], -d[:,2]))\n print(nm, \"centre:\", ch.c.round(4), \"brow u:\", u_deg.min().round(1), \"to\", u_deg.max().round(1), \"brow v:\", v_deg.min().round(1), \"to\", v_deg.max().round(1))\n'","WaitMsBeforeAsync":10000,"toolSummary":"Check skull chart u,v angles of eyebrows on sculpted VRMs"}

    input

    {
      "CommandLine": "python3 -c '\nimport sys, numpy as np\nsys.path[:0] = [\"tools\"]\nfrom vrm import VRM\nimport vroid_portrait as vp\nimport outfit, hair\n\nfor nm, path in [(\"elaine\", \"review/out/vroid-02/cache/elaine_argon_sculpt.vrm\"), (\"aldric\", \"review/out/vroid-02/cache/aldric_argon_sculpt.vrm\")]:\n    v = VRM(path)\n    prims = v.primitives()\n    roles = [vp.role_of(p[\"material\"]) for p in prims]\n    fit = outfit.Fit(v, {}, prims, roles)\n    ch = hair.head_chart(fit)\n    brow = np.concatenate([p[\"pos\"][np.unique(p[\"tri\"])] for p, r in zip(prims, roles) if r == \"brow\"])\n    d = brow - ch.c\n    r = np.linalg.norm(d, axis=1)\n    v_deg = np.degrees(np.arccos(np.clip(d[:,1]/r, -1, 1)))\n    u_deg = np.degrees(np.arctan2(d[:,0], -d[:,2]))\n    print(nm, \"centre:\", ch.c.round(4), \"brow u:\", u_deg.min().round(1), \"to\", u_deg.max().round(1), \"brow v:\", v_deg.min().round(1), \"to\", v_deg.max().round(1))\n'",
      "WaitMsBeforeAsync": 10000,
      "toolSummary": "Check skull chart u,v angles of eyebrows on sculpted VRMs"
    }

    result, 25 lines

    Tool is running as a background task with task id: 2c67e312-9c2f-495e-b4b1-b069467ba234/task-342
    Task Description: python3 -c '
    import sys, numpy as np
    sys.path[:0] = ["tools"]
    from vrm import VRM
    import vroid_portrait as vp
    import outfit, hair
    
    for nm, path in [("elaine", "review/out/vroid-02/cache/elaine_argon_sculpt.vrm"), ("aldric", "review/out/vroid-02/cache/aldric_argon_sculpt.vrm")]:
        v = VRM(path)
        prims = v.primitives()
        roles = [vp.role_of(p["material"]) for p in prims]
        fit = outfit.Fit(v, {}, prims, roles)
        ch = hair.head_chart(fit)
        brow = np.concatenate([p["pos"][np.unique(p["tri"])] for p, r in zip(prims, roles) if r == "brow"])
        d = brow - ch.c
        r = np.linalg.norm(d, axis=1)
        v_deg = np.degrees(np.arccos(np.clip(d[:,1]/r, -1, 1)))
        u_deg = np.degrees(np.arctan2(d[:,0], -d[:,2]))
        print(nm, "centre:", ch.c.round(4), "brow u:", u_deg.min().round(1), "to", u_deg.max().round(1), "brow v:", v_deg.min().round(1), "to", v_deg.max().round(1))
    '
    Task logs are available at: file://~/.gemini/antigravity-cli/brain/2c67e312-9c2f-495e-b4b1-b069467ba234/.system_generated/tasks/task-342.log
    YOU MUST TAKE ONE OF THE FOLLOWING TWO ACTIONS: A) either proceed to other relevant work (if any) or, B) simply update the user with a short message (that you have launched the command and will wait for it to finish) and end the turn.
     DO NOTHING ELSE.
     When updating the user, always respond in the language of the user (defaulting to English). Never mix two or more languages in the same response.

agent

+43:23
reasoning

I'm thinking through how to approach this.

  • read_file{"EndLine":1080,"Path":"~/work/lowmarch/tools/outfit.py","StartLine":900}

    input

    {
      "EndLine": 1080,
      "Path": "~/work/lowmarch/tools/outfit.py",
      "StartLine": 900
    }

    result, 182 lines

    Showing lines 900-1080 of 1284
    900: def sabaton(fit, name, side, role="metal", pad=0.010, ridges=3, seg=26, rows=14):
    901:     """A steel shoe over the whole foot (hides the base model's toes), built as a shoe last from
    902:     the foot's measurements: sole outline rounded at heel and toe and widest at the ball, top
    903:     rising from a rounded toe over the instep to the ankle at the heel. Lame ridges follow its
    904:     cross-section over the instep. Rides the foot bone.
    905:     (A squashed ellipsoid read as a triangular hoof; a shell projected onto the foot's convex
    906:     hull creased on the hull's facets.)"""
    907:     w = fit.weight((f"{side}_Foot", f"{side}_ToeBase"))
    908:     P = fit.pos[w > 0.5]
    909:     P = P[(P[:, 0] < 0.01) if side == "L" else (P[:, 0] > -0.01)]
    910:     lo, hi = P.min(0), P.max(0)
    911:     sole = lo[1] - 0.003
    912:     ankle = fit.bone[f"J_Bip_{side}_Foot"][1]
    913:     z_heel, z_toe = hi[2] + pad, lo[2] - pad                  # the foot points -z
    914:     width = (hi[0] - lo[0]) + 2 * pad
    915:     S = np.linspace(0, 1, seg)
    916:     # centreline: the foot's middle at each station, smoothed
    917:     cx = np.array([np.median(P[np.abs(P[:, 2] - (z_heel + t * (z_toe - z_heel))) < 0.02, 0])
    918:                    if (np.abs(P[:, 2] - (z_heel + t * (z_toe - z_heel))) < 0.02).any() else (lo[0] + hi[0]) / 2 for t in S])
    919:     cx = np.convolve(np.pad(cx, 3, mode="edge"), np.ones(7) / 7, "valid")
    920:     ends = np.sin(np.pi * np.clip(S, 0, 1)) ** 0.42                 # rounds the heel and the toe
    921:     half_w = width / 2 * ends * (0.80 + 0.20 * np.sin(np.pi * np.clip(S * 1.2, 0, 1)))   # widest at the ball
    922:     tall = (ankle + 0.02 - sole) * (1 - 0.62 * np.clip((S - 0.25) / 0.6, 0, 1) ** 0.8)   # ankle at the heel, low toe
    923:     tall = np.maximum(tall * np.sin(np.pi * np.clip(S, 0, 1)) ** 0.22, 0.004)
    924:     phi = np.linspace(0, np.pi, rows)
    925:     G = np.zeros((seg, rows, 3))
    926:     for i, t in enumerate(S):
    927:         z = z_heel + t * (z_toe - z_heel)
    928:         G[i] = np.stack([cx[i] + half_w[i] * np.cos(phi), sole + tall[i] * np.sin(phi), np.full(rows, z)], 1)
    929:     pos, tri = grid_mesh(G)
    930:     c = np.array([(lo[0] + hi[0]) / 2, sole, (z_heel + z_toe) / 2])
    931:     pc = piece(name, role, pos, tri, outward_from=c - [0, 0.05, 0])
    932:     out = [pc]
    933:     for k, t in enumerate(np.linspace(0.50, 0.74, ridges)):            # lames over the instep
    934:         i = int(round(t * (seg - 1)))
    935:         ring = G[i, 1:-1] + np.stack([np.cos(phi[1:-1]), np.sin(phi[1:-1]) * 1.0, np.zeros(rows - 2)], 1) * 0.0018
    936:         out.append(pipe(f"{name}_ridge{k}", role, ring, r=0.0024))
    937:     for q_ in out:
    938:         fit.bind(q_, rigid=f"J_Bip_{side}_Foot")
    939:     return out
    940: 
    941: 
    942: def knight_dress(fit):
    943:     """A blonde knight-princess: a long blue dress with a white petticoat edge, a fitted steel
    944:     breastplate, small spaulders, steel gauntlets and armoured boots, a two-handed sword with a
    945:     gold hilt, and her hair up in a braided bun with a ribbon."""
    946:     B = fit.bone
    947:     nk, hips = B["J_Bip_C_Neck"], B["J_Bip_C_Hips"]
    948:     knee = B["J_Bip_L_LowerLeg"][1]
    949:     out = []
    950: 
    951:     def grouped(pcs, g):
    952:         for pc in pcs:
    953:             if pc is not None:
    954:                 pc["group"] = g
    955:         return [pc for pc in pcs if pc is not None]
    956: 
    957:     def rolled(name, pc, rims, r=0.0024, role="metal"):
    958:         return [inherit(pipe(f"{name}_roll{k}", role, rim, r=r), pc) for k, rim in enumerate(rims)]
    959: 
    960:     def cuff_plane(side):
    961:         a, hd = B[f"J_Bip_{side}_LowerArm"], B[f"J_Bip_{side}_Hand"]
    962:         n = (hd - a) / np.linalg.norm(hd - a)
    963:         return n, n @ (hd - n * 0.035)
    964: 
    965:     torso = ("Spine", "Chest", "UpperChest", "Bust", "Shoulder", "UpperArm", "LowerArm", "Neck", "Hips")
    966:     bodice = wrap(fit, "bodice", "signature", torso, offset=0.006, exclude=("UpperLeg",),
    967:                   y_min=hips[1] + 0.02, y_max=nk[1] + 0.012, hems=[cuff_plane("L"), cuff_plane("R")])
    968:     tights = wrap(fit, "tights", "doublet", ("Hips", "UpperLeg", "LowerLeg"), offset=0.004, y_max=hips[1] + 0.03, subdiv=1)
    969:     boots = wrap(fit, "boots", "metal", ("LowerLeg", "Foot"), offset=0.014, y_max=knee - 0.06, exclude=("ToeBase",),
    970:                  subdiv=1, hems=[((0, 1, 0), knee - 0.065)])
    971:     gloves = wrap(fit, "gloves", "metal", ("Hand", "Thumb", "Index", "Middle", "Ring", "Little"),
    972:                   offset=0.0035, min_w=0.3, smooth=4)
    973:     out += grouped([bodice], "dress") + grouped([tights], "trousers") + grouped([boots], "boots") + grouped([gloves], "gloves")
    974:     out += grouped(sabaton(fit, "sabaton_L", "L") + sabaton(fit, "sabaton_R", "R"), "boots")
    975:     col, rim, _ = collar(fit, "collar", "signature", height_back=0.034, height_front=0.022)
    976:     out += grouped([col, inherit(pipe("collar_trim", "gold", rim, r=0.0022), col)], "dress")
    977: 
    978:     # steel breastplate, fitted, ending at the natural waist; outline plate with central keel and rolled edges
    979:     import gear as G
    980:     under_b = Surface(*without(bodice, ("Shoulder", "UpperArm", "LowerArm", "Hand")))
    981:     bps = G.breastplate(fit, under_b, y_top=nk[1] - 0.055, y_bottom=hips[1] + 0.085, plackart=False, arm=58.0)
    982:     cuirass = bps[0]
    983:     # cull bodice triangles well inside the rigid breastplate so they cannot poke through when arms lift
    984:     arm_hit = np.array([any(b in n for b in ("Shoulder", "UpperArm", "LowerArm", "Hand")) for n in bodice["jnames"]])
    985:     arm_w = (arm_hit[bodice["J"]] * bodice["W"]).sum(1)
    986:     by = bodice["pos"][bodice["tri"]][:, :, 1]
    987:     hide_b = (by.min(1) > hips[1] + 0.105) & (by.max(1) < nk[1] - 0.095) & ((arm_w[bodice["tri"]] < 0.15).all(1))
    988:     bodice["tri"] = bodice["tri"][~hide_b]
    989:     out += bps
    990: 
    991:     # the skirt from the waist to the ankle, white petticoat edge (the viewer's border band)
    992:     legs = merge_surfaces((tights["pos"], tights["tri"]), (boots["pos"], boots["tri"]))
    993:     # the waist ring is cast onto the bodice without its sleeves: with them, the hanging arms beside
    994:     # the hips held the ring out at the sides, a shelf the user saw once the arms moved
    995:     waist = merge_surfaces(without(bodice, ("Shoulder", "UpperArm", "LowerArm", "Hand")), (tights["pos"], tights["tri"]))
    996:     ytop = hips[1] + 0.08
    997:     sk, grid = skirt(fit, "skirt", "signature", waist, legs, ytop, ytop - 0.24, flare=0.17)   # hem above the ankle
    998:     sk["group"] = "dress"
    999:     out.append(sk)
    1000:     out += grouped([inherit(ribbon("skirt_hem", "heraldry", np.concatenate([grid[:, -1], grid[:1, -1]]), width=0.03,
    1001:                                    lift=0.0015, normals=near_normals(sk, np.concatenate([grid[:, -1], grid[:1, -1]]))), sk)],
    1002:                    "dress")
    1003:     out += grouped([inherit(pipe("waist_trim", "gold", grid[:, 0], r=0.0035, closed=True), sk)], "dress")
    1004: 
    1005:     plate_body = merge_surfaces((cuirass["pos"], cuirass["tri"]), (bodice["pos"], bodice["tri"]), (fit.pos, fit.tri))
    1006:     for side in ("L", "R"):
    1007:         ll, ft = B[f"J_Bip_{side}_LowerLeg"], B[f"J_Bip_{side}_Foot"]
    1008:         la, hd = B[f"J_Bip_{side}_LowerArm"], B[f"J_Bip_{side}_Hand"]
    1009:         sp, rims = pauldron(fit, f"spaulder_{side}", "steel", plate_body, side=side,
    1010:                             lames=((0, 54, 0.016, 0.022), (46, 76, 0.014, 0.020)), spread=105)
    1011:         out += grouped(sp, "plate") + grouped(sum((rolled(f"spaulder_{side}{k}", pc, [r_]) for k, (pc, r_) in
    1012:                                                    enumerate(zip(sp, rims))), []), "plate")
    1013:         fore = merge_surfaces(( limb_surface(fit, (f"{side}_LowerArm",), side).pos,
    1014:                                 limb_surface(fit, (f"{side}_LowerArm",), side).tri),
    1015:                               (side_of(bodice, side).pos, side_of(bodice, side).tri))
    1016:         vb, rims = limb_lames(fit, f"vambrace_{side}", "steel", fore, la, hd, ((0.10, 0.97, 0.014, 0.017),), rmax=0.11)
    1017:         fit.bind(vb[0], rigid=f"J_Bip_{side}_LowerArm")
    1018:         out += grouped(vb + rolled(f"vambrace_{side}", vb[0], rims[0]), "plate")
    1019:         arm = merge_surfaces((limb_surface(fit, (f"{side}_LowerArm", f"{side}_UpperArm"), side).pos,
    1020:                               limb_surface(fit, (f"{side}_LowerArm", f"{side}_UpperArm"), side).tri),
    1021:                              (side_of(bodice, side).pos, side_of(bodice, side).tri))
    1022:         jg, jr = joint_guard(fit, f"couter_{side}", f"J_Bip_{side}_LowerArm", f"J_Bip_{side}_Hand", (0, 0, 1), side,
    1023:                              arm, r=0.026, wing=0.042, depth=0.016)
    1024:         for pc in jg:
    1025:             fit.bind(pc, rigid=f"J_Bip_{side}_LowerArm")
    1026:         out += grouped(jg, "plate")
    1027:         shin = side_of(boots, side)
    1028:         # the greave starts below the boot's top: above it the casts find no boot and the knee bulges past it
    1029:         top = (knee - 0.075 - ll[1]) / (ft[1] - ll[1])
    1030:         gv, rims = limb_lames(fit, f"greave_{side}", "steel", shin, ll, ft, ((top, 0.80, 0.006, 0.009),), rmax=0.11)
    1031:         fit.bind(gv[0], rigid=f"J_Bip_{side}_LowerLeg")
    1032:         out += grouped(gv + rolled(f"greave_{side}", gv[0], rims[0]), "plate")
    1033: 
    1034:     if not any(r == "hair" for r in fit._roles):
    1035:         import hair
    1036:         out += [pc for pc in updo(fit) if pc["material"] != "OUTFIT_cowlick"] + hair.elaine(fit)
    1037:     out += sword(fit, "R", blade_len=0.84, blade_w=0.046, grip_len=0.21, hilt="gold", grip="signature")
    1038:     return [p for p in out if p is not None]
    1039: 
    1040: 
    1041: # ---- costumes -------------------------------------------------------------------------
    1042: def lord_tunic(fit):
    1043:     """The first lord costume, head to toe: tunic, tails, belt, trousers, boots, gloves, a standing collar,
    1044:     shoulder plates on the near (left) shoulder over a cape clasped at the collarbones, gold trim,
    1045:     and a sword in the right hand."""
    1046:     B = fit.bone
    1047:     nk, hips = B["J_Bip_C_Neck"], B["J_Bip_C_Hips"]
    1048:     knee = B["J_Bip_L_LowerLeg"][1]
    1049:     out = []
    1050: 
    1051:     def cuff_plane(side):
    1052:         a, h = B[f"J_Bip_{side}_LowerArm"], B[f"J_Bip_{side}_Hand"]
    1053:         n = (h - a) / np.linalg.norm(h - a)
    1054:         return n, n @ (h - n * 0.025)
    1055: 
    1056:     torso = ("Spine", "Chest", "UpperChest", "Shoulder", "UpperArm", "LowerArm", "Neck", "Hips")
    1057:     tunic = wrap(fit, "tunic", "coat", torso, offset=0.009, exclude=("UpperLeg",),
    1058:                  y_min=hips[1] - 0.03, y_max=nk[1] + 0.012, hems=[cuff_plane("L"), cuff_plane("R")])
    1059:     trousers = wrap(fit, "trousers", "leather", ("Hips", "UpperLeg", "LowerLeg"), offset=0.008,
    1060:                     y_max=hips[1] + 0.02, subdiv=1)
    1061:     boots = wrap(fit, "boots", "boot", ("LowerLeg", "Foot", "ToeBase"), offset=0.017, y_max=knee - 0.07,
    1062:                  subdiv=1, hems=[((0, 1, 0), knee - 0.075)])
    1063:     gloves = wrap(fit, "gloves", "glove", ("Hand", "Thumb", "Index", "Middle", "Ring", "Little"),
    1064:                   offset=0.0028, min_w=0.6, smooth=4)
    1065:     out += [p for p in (tunic, trousers, boots, gloves) if p is not None]
    1066:     under = merge_surfaces((tunic["pos"], tunic["tri"]), (fit.pos, fit.tri))
    1067: 
    1068:     for side in ("L", "R"):
    1069:         hand, shin = B[f"J_Bip_{side}_Hand"], B[f"J_Bip_{side}_LowerLeg"]
    1070:         out.append(loop_trim(f"cuff_trim_{side}", "gold", tunic, lambda P, h=hand: -np.linalg.norm(P.mean(0) - h), width=0.010))
    1071:         out.append(loop_trim(f"boot_trim_{side}", "leather", boots, lambda P, f=shin: -np.linalg.norm(P.mean(0) - f),
    1072:                              width=0.016, lift=0.003))
    1073:     pl = slice_line(tunic, 0, 0.0, keep=lambda p: p[2] < hips[2] - 0.02 and hips[1] + 0.06 < p[1] < nk[1] - 0.02)
    1074:     if len(pl) > 3:
    1075:         out.append(inherit(ribbon("placket", "gold", pl, width=0.009, lift=0.0015, normals=near_normals(tunic, pl)), tunic))
    1076: 
    1077:     # waist first: belt over the tunic, tails tucked under it
    1078:     b, buckle = belt(fit, "belt", "leather", under, hips[1] + 0.035)
    1079:     out.append(b)
    1080:     out.append(fit.bind(box("buckle", "gold", buckle + [0, 0, -0.006], ((1, 0, 0), (0, 1, 0), (0, 0, 1)),
  • read_file{"EndLine":140,"Path":"~/work/lowmarch/tools/gear.py","StartLine":1}

    input

    {
      "EndLine": 140,
      "Path": "~/work/lowmarch/tools/gear.py",
      "StartLine": 1
    }

    result, 141 lines

    Showing lines 1-140 of 984
    1: """Gear for generic units (the enemy soldiers): helmets, hoods and coifs, quilted coats, mail,
    2: riveted vests, shields and weapons, built on the plate kit (plates.py) and the head chart (hair.py).
    3: Each function returns pieces bound to the skeleton; a class costume (mobs.py) combines them.
    4: 
    5: Builds and faces for generic units are presets of the body's shape controls (BUILDS, FACES), so the
    6: same costume dresses a slim young soldier or a huge brute.
    7: """
    8: import math
    9: 
    10: import numpy as np
    11: 
    12: import outfit as O
    13: from fitting import Surface
    14: from plates import TorsoChart, LimbChart, ConeChart, outline_plate, stiffen, flat_piece, taper, Canvas
    15: from hair import head_chart
    16: 
    17: # ---- builds and faces: presets of vroid_portrait's shape controls ------------------------------------
    18: BUILDS = {
    19:     "slim": dict(chest=0.95, torso=0.94, arms=0.94, legs=0.94, neck=0.95),
    20:     "average": dict(),
    21:     "athletic": dict(chest=1.06, arms=1.07, legs=1.04, neck=1.08, shoulder_w=0.010),
    22:     "stocky": dict(chest=1.18, torso=1.24, arms=1.18, legs=1.16, neck=1.28, shoulder_w=0.018, leg_len=0.95, height=0.97),
    23:     "huge": dict(chest=1.34, torso=1.32, arms=1.40, legs=1.32, neck=1.55, hands=1.22, shoulder_w=0.042, height=1.12,
    24:                  head=0.92),
    25: }
    26: FACES = {   # 3D-strength values (the sculpt moves anatomical points by millimetres per unit)
    27:     "bare": dict(),     # no sculpt here: the head is sculpted in its own file (tools/heads.py, the armory)
    28:     "young": dict(face_len=-0.04, jaw=-0.4, chin_len=-0.5, eye=1.04),
    29:     "plain": dict(face_len=0.05, jaw=0.6, brow_ridge=0.6, eye=0.95, rest={"Fcl_BRW_Angry": 0.3}),
    30:     "veteran": dict(face_len=0.14, jaw=1.4, chin_w=1.2, chin_len=1.0, cheek=-1.0, brow_ridge=1.6, nose=1.4, eye=0.88,
    31:                     age_lines=0.8, iris=0.82, blush=0.0, mouth=1.1,
    32:                     rest={"Fcl_EYE_Angry": 0.6, "Fcl_EYE_Close": 0.12, "Fcl_EYE_Joy": 0.22, "Fcl_BRW_Angry": 0.65,
    33:                           "Fcl_MTH_Down": 0.35}),
    34:     "brute": dict(face_len=0.10, jaw=2.6, chin_w=2.2, chin_len=0.8, cheek=1.2, brow_ridge=2.4, nose=0.8, nose_w=2.2,
    35:                   eye=0.86, mouth=1.25, rest={"Fcl_EYE_Close": 0.28, "Fcl_BRW_Angry": 0.75}),
    36:     "gaunt": dict(face_len=0.18, jaw=0.3, chin_len=1.2, cheek=-1.6, nose=1.8, eye=0.88,
    37:                   rest={"Fcl_BRW_Angry": 0.5, "Fcl_EYE_Close": 0.25}),
    38:     "round": dict(face_len=-0.03, jaw=1.0, chin_w=1.2, cheek=1.6, eye=0.93, mouth=1.08),
    39:     "soft": dict(face_len=0.02, jaw=-0.2, cheek=0.4, eye=1.0),
    40:     "stern": dict(face_len=0.07, jaw=0.6, chin_len=0.5, brow_ridge=0.8, eye=0.92, rest={"Fcl_BRW_Angry": 0.55}),
    41: }
    42: 
    43: 
    44: def shape(build="average", face="plain", **extra):
    45:     """A shape dict for the cast: a build and a face combined (later keys win)."""
    46:     out = dict(BUILDS[build])
    47:     f = dict(FACES[face])
    48:     extra = dict(extra)
    49:     rest = {**out.pop("rest", {}), **f.pop("rest", {}), **extra.pop("rest", {})}
    50:     out.update(f)
    51:     out.update(extra)
    52:     if rest:
    53:         out["rest"] = rest
    54:     return out
    55: 
    56: 
    57: def _bind(fit, pcs, bone):
    58:     for pc in pcs:
    59:         fit.bind(pc, rigid=bone)
    60:     return pcs
    61: 
    62: 
    63: def _group(pcs, g):
    64:     for pc in pcs:
    65:         pc["group"] = g
    66:     return pcs
    67: 
    68: 
    69: # ---- heads: helmets, coifs and hoods on the chart over the skull ----------------------------------------
    70: def helmet(fit, kind="kettle", role="steel", lift=0.030, name="helmet", rivets=True, trim_role=None):
    71:     """A helmet on the skull chart.
    72:     kettle: a rounded bowl to just above the brows and ears, a wide brim sloping down.
    73:     nasal: a taller bowl with a band at the rim and a nose guard down to the nose's tip.
    74:     sallet: a bowl coming low over the forehead, sweeping into a long flared tail at the back.
    75:     close: a bowl to the jaw all round, a face plate with an eye slit and breaths (a bucket helm)."""
    76:     ch = head_chart(fit)
    77:     out = []
    78:     if kind == "kettle":
    79:         rim = lambda u: float(np.interp(abs(u), [0, 60, 100, 180], [74, 80, 86, 92]))
    80:     elif kind == "nasal":
    81:         rim = lambda u: float(np.interp(abs(u), [0, 60, 100, 180], [72, 82, 92, 100]))
    82:     elif kind == "sallet":
    83:         rim = lambda u: float(np.interp(abs(u), [0, 50, 90, 140, 180], [78, 86, 104, 124, 130]))
    84:     else:                                                  # close
    85:         rim = lambda u: float(np.interp(abs(u), [0, 60, 100, 180], [136, 134, 126, 122]))
    86:     fl = None
    87:     if kind == "sallet":                                   # the tail flares out over the nape
    88:         fl = lambda u, v, s, t: 0.030 * max(0.0, (abs(u) - 110) / 70) * (1 - t) ** 1.6
    89:     seams = []
    90:     if kind in ("nasal", "kettle"):                        # a raised comb from front to back
    91:         seams = [[(0, 4), (0, rim(0) - 4)], [(180, 4), (180, rim(180) - 4)]]
    92:     deco = []
    93:     if kind == "close":                                    # the eye slit and the breaths
    94:         deco.append(("line", [(-44, 97), (44, 97)], 0.008, "groove"))
    95:         for u in (-24, -16, -8, 8, 16, 24):
    96:             deco.append(("line", [(u, 112), (u, 122)], 0.003, "groove"))
    97:     bowl, ex = outline_plate(f"{name}", role, ch, -180, 180, rim, lambda u: 0.0, offset=lift,
    98:                              flare=fl, thickness=0.004, nu=72, nv=22, roll=0.003, roll_edges=("bottom",),
    99:                              roll_role=trim_role or role, seams=seams, groove=(0.006, -0.004), panel_crown=0.0,
    100:                              decal=deco, decal_px=1200)
    101:     out += [bowl] + ex
    102:     if kind == "kettle":                                   # the brim: out and down from the rim, all round
    103:         U = np.linspace(-180, 180, 73)
    104:         rimP = np.array([ch.point(u, rim(u), off=lift) for u in U])
    105:         d = rimP - ch.c
    106:         d[:, 1] = 0
    107:         d /= np.linalg.norm(d, axis=1, keepdims=True)
    108:         G = np.stack([rimP + d * 0.058 * t - np.array([0, 0.022 * t * t, 0]) for t in np.linspace(0, 1, 5)], 1)
    109:         pos, tri, outer = O.thick_grid(G, 0.004, outward_from=ch.c - np.array([0, 0.4, 0]))
    110:         brim = O.piece(f"{name}_brim", role, pos, tri)
    111:         out += [brim, O.pipe(f"{name}_brim_roll", trim_role or role, outer[:, -1], r=0.003, seg=6)]
    112:     if kind == "nasal":                                    # the nose guard and a riveted band
    113:         guard, gx = outline_plate(f"{name}_nasal", role, ch, -5, 5, lambda u: 104.0, lambda u: rim(0) - 8,
    114:                                   offset=lift + 0.006, thickness=0.004, nu=8, nv=12, roll=0)
    115:         out += [guard]
    116:         band, bx = outline_plate(f"{name}_band", role, ch, -180, 180, lambda u: rim(u), lambda u: rim(u) - 9,
    117:                                  offset=lift + 0.003, thickness=0.003, nu=72, nv=4, roll=0,
    118:                                  rivets=(0.035, 0.009, 0.0035) if rivets else None, rivet_role=role)
    119:         out += [band] + bx
    120:     _bind(fit, out, "J_Bip_C_Head")
    121:     return _group(out, "helmet")
    122: 
    123: 
    124: def coif(fit, role="mail", name="coif", lift=0.017, face=True):
    125:     """A hood worn under a helmet (padded or mail): over the skull and down to the jaw, the face left
    126:     open (face=False closes it to a slit-less cap), and a short cape over the shoulders."""
    127:     ch = head_chart(fit)
    128:     if face:
    129:         # down over the nape at the back: the study's soldiers show no hair there (a cut hair edge read
    130:         # as a sawtooth under the brim)
    131:         bottom = lambda u: float(np.interp(abs(u), [0, 34, 52, 80, 120, 180], [58, 64, 132, 142, 150, 156]))
    132:     else:
    133:         bottom = lambda u: 146.0
    134:     pc, _ = outline_plate(name, role, ch, -180, 180, bottom, lambda u: 0.0, offset=lift, thickness=0.004,
    135:                           nu=72, nv=24, roll=0)
    136:     _bind(fit, [pc], "J_Bip_C_Head")
    137:     return _group([pc], "helmet")
    138: 
    139: 
    140: def hood(fit, role="cloth", name="hood", lift=0.022, peak=0.03):
  • resultCommand exited with code 0.
    Command exited with code 0.
    
    Command output:
    elaine centre: [ 0.      1.7245 -0.0477] brow u: -43.0 to 43.0 brow v: 80.0 to 94.1
    aldric centre: [ 0.      1.7608 -0.0538] brow u: -42.5 to 42.5 brow v: 79.4 to 93.0
    
    Log: file://~/.gemini/antigravity-cli/brain/2c67e312-9c2f-495e-b4b1-b069467ba234/.system_generated/tasks/task-342.log

agent

+43:54
reasoning

The output from task-342 provides facial feature coordinates and brow range data for two individuals. The center points and brow ranges are being extracted. This data will likely be used for comparing facial features.

  • read_file{"EndLine":350,"Path":"~/work/lowmarch/tools/blender_sculpt_lead.py","StartLine":250}

    input

    {
      "EndLine": 350,
      "Path": "~/work/lowmarch/tools/blender_sculpt_lead.py",
      "StartLine": 250
    }

    result, 102 lines

    Showing lines 250-350 of 593
    250:     lenticular/diamond cross-section with a crisp central ridge normal.
    251: 
    252:     pts: (K, 3) control points from root to tip
    253:     widths: (K,) half-widths in metres
    254:     thicks: (K,) half-thicknesses in metres
    255:     Returns (pos, nrm, uv, tri) as numpy arrays.
    256:     """
    257:     pts = np.asarray(pts, dtype=np.float64)
    258:     widths = np.asarray(widths, dtype=np.float64)
    259:     thicks = np.asarray(thicks, dtype=np.float64)
    260:     K = len(pts)
    261:     t_ctrl = np.linspace(0.0, 1.0, K)
    262:     t_eval = np.linspace(0.0, 1.0, nv)
    263: 
    264:     # Smooth spline evaluation via cubic polynomial / Akima-like Hermite interpolation
    265:     C = np.zeros((nv, 3), dtype=np.float64)
    266:     tangents = np.gradient(pts, t_ctrl, axis=0)
    267:     for j, t in enumerate(t_eval):
    268:         idx = min(K - 2, max(0, int(np.searchsorted(t_ctrl, t) - 1)))
    269:         t0, t1 = t_ctrl[idx], t_ctrl[idx + 1]
    270:         h = max(t1 - t0, 1e-9)
    271:         s = (t - t0) / h
    272:         h00 = 2 * s ** 3 - 3 * s ** 2 + 1
    273:         h10 = s ** 3 - 2 * s ** 2 + s
    274:         h01 = -2 * s ** 3 + 3 * s ** 2
    275:         h11 = s ** 3 - s ** 2
    276:         C[j] = h00 * pts[idx] + h10 * h * tangents[idx] + h01 * pts[idx + 1] + h11 * h * tangents[idx + 1]
    277: 
    278:     W = np.interp(t_eval, t_ctrl, widths) * np.sin(np.pi * np.clip(0.06 + 0.94 * (1.0 - t_eval ** 1.65), 0.0, 1.0))
    279:     Th = np.interp(t_eval, t_ctrl, thicks) * (1.0 - 0.82 * t_eval ** 1.5)
    280: 
    281:     # Parallel-transport frame along C, with outward normal pointing away from the skull axis (0, y, -0.01)
    282:     T = np.gradient(C, axis=0)
    283:     T /= np.maximum(np.linalg.norm(T, axis=1, keepdims=True), 1e-9)
    284: 
    285:     skull_c = np.array([0.0, C[0, 1] - 0.04, -0.01])
    286:     N = np.zeros_like(C)
    287:     B_vec = np.zeros_like(C)
    288:     for j in range(nv):
    289:         out = C[j] - np.array([0.0, C[j, 1], -0.015])
    290:         if np.linalg.norm(out) < 1e-4:
    291:             out = np.array([0.0, 0.0, -1.0])
    292:         out = out - T[j] * (out @ T[j])
    293:         if np.linalg.norm(out) < 1e-5:
    294:             out = np.array([0.0, 1.0, 0.0]) - T[j] * T[j, 1]
    295:         out /= np.linalg.norm(out)
    296:         if j > 0 and (out @ N[j - 1]) < 0:
    297:             out = -out
    298:         N[j] = out
    299:         b = np.cross(T[j], out)
    300:         b /= np.maximum(np.linalg.norm(b), 1e-9)
    301:         B_vec[j] = b
    302: 
    303:     # Cross-section profile: closed 8-point diamond/lenticular loop (outer ridge -> edges -> inner face)
    304:     # Using a closed cross-section ensures locks look solid from every camera angle!
    305:     angles = np.linspace(0, 2 * np.pi, nu, endpoint=False)
    306:     P_grid = np.zeros((nu, nv, 3), dtype=np.float64)
    307:     N_grid = np.zeros((nu, nv, 3), dtype=np.float64)
    308:     UV_grid = np.zeros((nu, nv, 2), dtype=np.float64)
    309: 
    310:     for i, a in enumerate(angles):
    311:         # Sharp anime ridge on the outer face (cos(a) > 0)
    312:         ca, sa = math.cos(a), math.sin(a)
    313:         ridge = np.sign(ca) * (abs(ca) ** 0.72)
    314:         side = sa
    315:         for j in range(nv):
    316:             P_grid[i, j] = C[j] + B_vec[j] * (side * W[j]) + N[j] * (ridge * Th[j])
    317:             # Normal tilted away from ridge center so cel shader catches crisp longitudinal strand bands
    318:             n_dir = N[j] * (1.25 * ca) + B_vec[j] * (0.65 * sa)
    319:             n_dir /= max(np.linalg.norm(n_dir), 1e-9)
    320:             N_grid[i, j] = n_dir
    321:             u_val = u_range[0] + (u_range[1] - u_range[0]) * (0.5 + 0.5 * side)
    322:             UV_grid[i, j] = (u_val, t_eval[j])
    323: 
    324:     # Triangulate closed tube + tip cap
    325:     tris = []
    326:     idx = lambda i_, j_: (i_ % nu) * nv + j_
    327:     for i in range(nu):
    328:         for j in range(nv - 1):
    329:             a, b, c, d = idx(i, j), idx(i + 1, j), idx(i + 1, j + 1), idx(i, j + 1)
    330:             tris.append((a, b, c))
    331:             tris.append((a, c, d))
    332: 
    333:     pos = P_grid.reshape(-1, 3).astype(np.float32)
    334:     nrm = N_grid.reshape(-1, 3).astype(np.float32)
    335:     uv = UV_grid.reshape(-1, 2).astype(np.float32)
    336:     tri = np.array(tris, dtype=np.int32)
    337:     return pos, nrm, uv, tri
    338: 
    339: 
    340: def build_elaine_valkyrie_hair(lm):
    341:     """Build Elaine's custom anime Valkyrie hairstyle in Blender:
    342:     1. Smooth cranial dome cap + side-parted temple-framing curtain bangs (eyebrows 100% clear!).
    343:     2. Twisted Imperial Valkyrie Crown Braid (coronet plait) around the skull with a crimson/gold clasp.
    344:     3. 20 layered flowing diamond-section back and shoulder locks cascading over the pauldrons.
    345:     """
    346:     eye_y = lm["eye_y"]
    347:     chin_y = lm["chin_y"]
    348:     span = lm["span"]
    349:     crown_y = eye_y + 1.08 * span
    350:     cz = -0.018