agent

+18:31
reasoning

The build process for aldric and elaine shows the use of a cached output. Subsequent builds use the cached results, which significantly reduces build time. Observe that the clash keyframes are present across the builds, indicating consistent output from the cached duel file.

  • read_file{"EndLine":200,"Path":"~/work/lowmarch/review/out/vroid-02/site/checks.json","StartLine":1}

    input

    {
      "EndLine": 200,
      "Path": "~/work/lowmarch/review/out/vroid-02/site/checks.json",
      "StartLine": 1
    }

    result, 201 lines

    Showing lines 1-200 of 375
    1: {
    2:  "aldric": {
    3:   "summary": "aldric: 14 keyframes checked; 4 with an arm through the body, 5 with an arm resting on it",
    4:   "through": [
    5:    {
    6:     "clip": "attack",
    7:     "t": 0.32,
    8:     "hits": [
    9:      [
    10:       "R_UpperArm",
    11:       -0.0577
    12:      ],
    13:      [
    14:       "R_LowerArm",
    15:       -0.0229
    16:      ],
    17:      [
    18:       "L_UpperArm",
    19:       0.0081
    20:      ]
    21:     ],
    22:     "text": "aldric, attack at 0.32 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body"
    23:    },
    24:    {
    25:     "clip": "attack",
    26:     "t": 0.44,
    27:     "hits": [
    28:      [
    29:       "R_UpperArm",
    30:       -0.0577
    31:      ],
    32:      [
    33:       "R_LowerArm",
    34:       -0.0229
    35:      ],
    36:      [
    37:       "L_UpperArm",
    38:       0.0081
    39:      ]
    40:     ],
    41:     "text": "aldric, attack at 0.44 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body"
    42:    },
    43:    {
    44:     "clip": "attack",
    45:     "t": 0.68,
    46:     "hits": [
    47:      [
    48:       "R_UpperArm",
    49:       -0.0459
    50:      ]
    51:     ],
    52:     "text": "aldric, attack at 0.68 s: right upper arm 4.6 cm inside the body"
    53:    },
    54:    {
    55:     "clip": "attack",
    56:     "t": 1.05,
    57:     "hits": [
    58:      [
    59:       "R_UpperArm",
    60:       -0.0459
    61:      ]
    62:     ],
    63:     "text": "aldric, attack at 1.05 s: right upper arm 4.6 cm inside the body"
    64:    }
    65:   ],
    66:   "touching": [
    67:    {
    68:     "clip": "idle",
    69:     "t": 0.0,
    70:     "hits": [
    71:      [
    72:       "L_UpperArm",
    73:       0.0066
    74:      ],
    75:      [
    76:       "R_UpperArm",
    77:       0.0089
    78:      ]
    79:     ],
    80:     "text": "aldric, idle at 0.00 s: left upper arm 0.7 cm from the body; right upper arm 0.9 cm from the body"
    81:    },
    82:    {
    83:     "clip": "idle",
    84:     "t": 0.9,
    85:     "hits": [
    86:      [
    87:       "L_UpperArm",
    88:       0.0066
    89:      ],
    90:      [
    91:       "R_UpperArm",
    92:       0.0139
    93:      ]
    94:     ],
    95:     "text": "aldric, idle at 0.90 s: left upper arm 0.7 cm from the body; right upper arm 1.4 cm from the body"
    96:    },
    97:    {
    98:     "clip": "idle",
    99:     "t": 1.8,
    100:     "hits": [
    101:      [
    102:       "L_UpperArm",
    103:       0.0066
    104:      ],
    105:      [
    106:       "R_UpperArm",
    107:       0.0089
    108:      ]
    109:     ],
    110:     "text": "aldric, idle at 1.80 s: left upper arm 0.7 cm from the body; right upper arm 0.9 cm from the body"
    111:    },
    112:    {
    113:     "clip": "attack",
    114:     "t": 0.0,
    115:     "hits": [
    116:      [
    117:       "L_UpperArm",
    118:       0.0066
    119:      ],
    120:      [
    121:       "R_UpperArm",
    122:       0.0089
    123:      ]
    124:     ],
    125:     "text": "aldric, attack at 0.00 s: left upper arm 0.7 cm from the body; right upper arm 0.9 cm from the body"
    126:    },
    127:    {
    128:     "clip": "attack",
    129:     "t": 1.5,
    130:     "hits": [
    131:      [
    132:       "L_UpperArm",
    133:       0.0066
    134:      ],
    135:      [
    136:       "R_UpperArm",
    137:       0.0089
    138:      ]
    139:     ],
    140:     "text": "aldric, attack at 1.50 s: left upper arm 0.7 cm from the body; right upper arm 0.9 cm from the body"
    141:    }
    142:   ],
    143:   "layers": {
    144:    "summary": "aldric: plate over garments: shows through in the reference pose, and 3 of 14 keyframes add to it",
    145:    "items": [
    146:     {
    147:      "clip": "reference pose",
    148:      "t": 0.0,
    149:      "hits": [
    150:       [
    151:        "doublet",
    152:        "tasset_R0",
    153:        6,
    154:        0.026198661466540343
    155:       ],
    156:       [
    157:        "doublet",
    158:        "tasset_L0",
    159:        6,
    160:        0.026193028024265954
    161:       ],
    162:       [
    163:        "doublet",
    164:        "couter_L_cap",
    165:        8,
    166:        0.00568243497358759
    167:       ],
    168:       [
    169:        "doublet",
    170:        "breastplate",
    171:        6,
    172:        0.005490969616655779
    173:       ],
    174:       [
    175:        "doublet",
    176:        "couter_R_cap",
    177:        8,
    178:        0.005216249766812707
    179:       ]
    180:      ],
    181:      "text": "aldric, reference pose: doublet through tasset_R0 (up to 26 mm); doublet through tasset_L0 (up to 26 mm); doublet through couter_L_cap (up to 6 mm); doublet through breastplate (up to 5 mm)"
    182:     },
    183:     {
    184:      "clip": "clash",
    185:      "t": 0.0,
    186:      "hits": [
    187:       [
    188:        "doublet",
    189:        "vambrace_R",
    190:        5,
    191:        0.028083420394167592
    192:       ]
    193:      ],
    194:      "text": "aldric, clash at 0.00 s: doublet through vambrace_R (5 points, up to 28 mm)"
    195:     },
    196:     {
    197:      "clip": "clash",
    198:      "t": 1.6,
    199:      "hits": [
    200:       [
  • read_file{"EndLine":375,"Path":"~/work/lowmarch/review/out/vroid-02/site/checks.json","StartLine":200}

    input

    {
      "EndLine": 375,
      "Path": "~/work/lowmarch/review/out/vroid-02/site/checks.json",
      "StartLine": 200
    }

    result, 178 lines

    Showing lines 200-375 of 375
    200:       [
    201:        "doublet",
    202:        "vambrace_R",
    203:        6,
    204:        0.024806409791815153
    205:       ]
    206:      ],
    207:      "text": "aldric, clash at 1.60 s: doublet through vambrace_R (6 points, up to 25 mm)"
    208:     },
    209:     {
    210:      "clip": "clash",
    211:      "t": 2.4,
    212:      "hits": [
    213:       [
    214:        "doublet",
    215:        "vambrace_R",
    216:        5,
    217:        0.028083420394167592
    218:       ]
    219:      ],
    220:      "text": "aldric, clash at 2.40 s: doublet through vambrace_R (5 points, up to 28 mm)"
    221:     }
    222:    ]
    223:   }
    224:  },
    225:  "elaine": {
    226:   "summary": "elaine: 14 keyframes checked; 2 with an arm through the body, 7 with an arm resting on it",
    227:   "through": [
    228:    {
    229:     "clip": "attack",
    230:     "t": 0.68,
    231:     "hits": [
    232:      [
    233:       "R_UpperArm",
    234:       -0.0269
    235:      ]
    236:     ],
    237:     "text": "elaine, attack at 0.68 s: right upper arm 2.7 cm inside the body"
    238:    },
    239:    {
    240:     "clip": "attack",
    241:     "t": 1.05,
    242:     "hits": [
    243:      [
    244:       "R_UpperArm",
    245:       -0.0269
    246:      ]
    247:     ],
    248:     "text": "elaine, attack at 1.05 s: right upper arm 2.7 cm inside the body"
    249:    }
    250:   ],
    251:   "touching": [
    252:    {
    253:     "clip": "idle",
    254:     "t": 0.0,
    255:     "hits": [
    256:      [
    257:       "R_UpperArm",
    258:       0.0075
    259:      ],
    260:      [
    261:       "L_UpperArm",
    262:       0.0111
    263:      ]
    264:     ],
    265:     "text": "elaine, idle at 0.00 s: right upper arm 0.8 cm from the body; left upper arm 1.1 cm from the body"
    266:    },
    267:    {
    268:     "clip": "idle",
    269:     "t": 0.9,
    270:     "hits": [
    271:      [
    272:       "L_UpperArm",
    273:       0.0111
    274:      ],
    275:      [
    276:       "R_UpperArm",
    277:       0.0119
    278:      ]
    279:     ],
    280:     "text": "elaine, idle at 0.90 s: left upper arm 1.1 cm from the body; right upper arm 1.2 cm from the body"
    281:    },
    282:    {
    283:     "clip": "idle",
    284:     "t": 1.8,
    285:     "hits": [
    286:      [
    287:       "R_UpperArm",
    288:       0.0075
    289:      ],
    290:      [
    291:       "L_UpperArm",
    292:       0.0111
    293:      ]
    294:     ],
    295:     "text": "elaine, idle at 1.80 s: right upper arm 0.8 cm from the body; left upper arm 1.1 cm from the body"
    296:    },
    297:    {
    298:     "clip": "attack",
    299:     "t": 0.0,
    300:     "hits": [
    301:      [
    302:       "R_UpperArm",
    303:       0.0075
    304:      ],
    305:      [
    306:       "L_UpperArm",
    307:       0.0111
    308:      ]
    309:     ],
    310:     "text": "elaine, attack at 0.00 s: right upper arm 0.8 cm from the body; left upper arm 1.1 cm from the body"
    311:    },
    312:    {
    313:     "clip": "attack",
    314:     "t": 0.32,
    315:     "hits": [
    316:      [
    317:       "L_UpperArm",
    318:       0.0081
    319:      ]
    320:     ],
    321:     "text": "elaine, attack at 0.32 s: left upper arm 0.8 cm from the body"
    322:    },
    323:    {
    324:     "clip": "attack",
    325:     "t": 0.44,
    326:     "hits": [
    327:      [
    328:       "L_UpperArm",
    329:       0.0081
    330:      ]
    331:     ],
    332:     "text": "elaine, attack at 0.44 s: left upper arm 0.8 cm from the body"
    333:    },
    334:    {
    335:     "clip": "attack",
    336:     "t": 1.5,
    337:     "hits": [
    338:      [
    339:       "R_UpperArm",
    340:       0.0075
    341:      ],
    342:      [
    343:       "L_UpperArm",
    344:       0.0111
    345:      ]
    346:     ],
    347:     "text": "elaine, attack at 1.50 s: right upper arm 0.8 cm from the body; left upper arm 1.1 cm from the body"
    348:    }
    349:   ],
    350:   "layers": {
    351:    "summary": "elaine: plate over garments: shows through in the reference pose, nothing new in 14 keyframes",
    352:    "items": [
    353:     {
    354:      "clip": "reference pose",
    355:      "t": 0.0,
    356:      "hits": [
    357:       [
    358:        "bodice",
    359:        "couter_L_cap",
    360:        5,
    361:        0.0017579599169754796
    362:       ],
    363:       [
    364:        "bodice",
    365:        "couter_R_cap",
    366:        5,
    367:        0.0017450557770311826
    368:       ]
    369:      ],
    370:      "text": "elaine, reference pose: bodice through couter_L_cap (up to 2 mm); bodice through couter_R_cap (up to 2 mm)"
    371:     }
    372:    ]
    373:   }
    374:  }
    375: }
    (no newline at end of file)

agent

+18:47
reasoning

aldric's checks.json entries show potential armor penetration inconsistencies, specifically with the "doublet" item type. Examining lord within the outfit data might reveal configuration differences.

  • read_file{"EndLine":1260,"Path":"~/work/lowmarch/tools/outfit.py","StartLine":1130}

    input

    {
      "EndLine": 1260,
      "Path": "~/work/lowmarch/tools/outfit.py",
      "StartLine": 1130
    }

    result, 132 lines

    Showing lines 1130-1260 of 1273
    1130:         return n, n @ (h - n * 0.035)
    1131: 
    1132:     def grouped(pcs, g):
    1133:         for pc in pcs:
    1134:             if pc is not None:
    1135:                 pc["group"] = g
    1136:         return [pc for pc in pcs if pc is not None]
    1137: 
    1138:     def rolled(name, pc, rims, r=0.0028):
    1139:         """A rolled steel edge along each rim: what defines plate in the study instead of gold."""
    1140:         return [inherit(pipe(f"{name}_roll{k}", "metal", rim, r=r), pc) for k, rim in enumerate(rims)]
    1141: 
    1142:     # 1-2: the doublet and what's under it
    1143:     torso = ("Spine", "Chest", "UpperChest", "Shoulder", "UpperArm", "LowerArm", "Neck", "Hips")
    1144:     doublet = wrap(fit, "doublet", "doublet", torso, offset=0.008, exclude=("UpperLeg",),
    1145:                    y_min=hips[1] - 0.03, y_max=nk[1] + 0.012, hems=[cuff_plane("L"), cuff_plane("R")])
    1146:     trousers = wrap(fit, "trousers", "leather", ("Hips", "UpperLeg", "LowerLeg"), offset=0.008,
    1147:                     y_max=hips[1] + 0.02, subdiv=1)
    1148:     boots = wrap(fit, "boots", "boot", ("LowerLeg", "Foot", "ToeBase"), offset=0.017, y_max=knee - 0.07,
    1149:                  subdiv=1, hems=[((0, 1, 0), knee - 0.075)])
    1150:     gloves = wrap(fit, "gloves", "glove", ("Hand", "Thumb", "Index", "Middle", "Ring", "Little"),
    1151:                   offset=0.0028, min_w=0.3, smooth=4)       # down over the wrist: no gap under the cuff
    1152:     out += grouped([doublet], "doublet") + [p for p in (trousers, boots, gloves) if p is not None]
    1153:     col, _, _ = collar(fit, "collar", "doublet", height_back=0.030, height_front=0.018)
    1154:     out += grouped([col], "doublet")
    1155:     body_d = merge_surfaces((doublet["pos"], doublet["tri"]), (fit.pos, fit.tri))
    1156: 
    1157:     # 4: plate
    1158:     cuirass = wrap(fit, "breastplate", "steel", ("Spine", "Chest", "UpperChest", "Hips"), offset=0.014,
    1159:                    exclude=("Shoulder", "UpperArm", "Neck", "UpperLeg"), y_min=hips[1] + 0.030, y_max=nk[1] - 0.040,
    1160:                    base=Surface(doublet["pos"], doublet["tri"]), smooth=40,
    1161:                    hems=[((0, 1, 0), hips[1] + 0.040), ((0, 1, 0), nk[1] - 0.050)])
    1162:     keel = np.clip(1 - np.abs(cuirass["pos"][:, 0]) / 0.07, 0, 1) * (cuirass["pos"][:, 2] < B["J_Bip_C_Chest"][2])
    1163:     cuirass["pos"] = cuirass["pos"] + cuirass["nrm"] * (0.007 * keel ** 2)[:, None]     # a soft central ridge
    1164:     cuirass["nrm"] = vertex_normals(cuirass["pos"], cuirass["tri"])
    1165:     loops = [cuirass["pos"][L] for L in cuirass["loops"] if len(L) > 12]
    1166:     out += grouped([cuirass] + [inherit(pipe(f"breastplate_roll{k}", "metal", Lp, r=0.0034, closed=True), cuirass)
    1167:                                 for k, Lp in enumerate(loops)], "plate")
    1168:     plate_body = merge_surfaces((cuirass["pos"], cuirass["tri"]), (doublet["pos"], doublet["tri"]), (fit.pos, fit.tri))
    1169: 
    1170:     for side in ("L", "R"):
    1171:         sx = -1 if side == "L" else 1
    1172:         ul, ll, ft = B[f"J_Bip_{side}_UpperLeg"], B[f"J_Bip_{side}_LowerLeg"], B[f"J_Bip_{side}_Foot"]
    1173:         ua, la, hd = B[f"J_Bip_{side}_UpperArm"], B[f"J_Bip_{side}_LowerArm"], B[f"J_Bip_{side}_Hand"]
    1174:         # tassets: three lames on the front and outside of each thigh, hung from the waist
    1175:         thigh = side_of(trousers, side)
    1176:         arc = (-125, 20) if side == "L" else (-20, 125)
    1177:         # tops tuck under the belt (small offset there), lower rims flare out
    1178:         tas, rims = limb_lames(fit, f"tasset_{side}", "steel", thigh, ul + [0, 0.085, 0], ul + (ll - ul) * 0.46,
    1179:                                ((0.0, 0.40, 0.006, 0.026), (0.33, 0.70, 0.018, 0.026), (0.63, 1.0, 0.016, 0.024)),
    1180:                                arc=arc, rmax=0.16)
    1181:         for k, pc in enumerate(tas):
    1182:             fit.bind(pc, blend={"J_Bip_C_Hips": 0.55 - 0.2 * k, f"J_Bip_{side}_UpperLeg": 0.45 + 0.2 * k})
    1183:         out += grouped(tas, "plate") + grouped(sum((rolled(f"tasset_{side}{k}", pc, [r[1]]) for k, (pc, r) in
    1184:                                                     enumerate(zip(tas, rims))), []), "plate")
    1185:         # greaves over the boots, poleyns with wings at the knee
    1186:         shin = side_of(boots, side)
    1187:         gv, rims = limb_lames(fit, f"greave_{side}", "steel", shin, ll, ft, ((0.12, 0.80, 0.008, 0.011),), rmax=0.11)
    1188:         fit.bind(gv[0], rigid=f"J_Bip_{side}_LowerLeg")
    1189:         out += grouped(gv + rolled(f"greave_{side}", gv[0], rims[0]), "plate")
    1190:         leg = merge_surfaces((trousers["pos"], trousers["tri"]), (boots["pos"], boots["tri"]))
    1191:         jg, jr = joint_guard(fit, f"poleyn_{side}", f"J_Bip_{side}_LowerLeg", f"J_Bip_{side}_Foot", (0, 0, -1), side,
    1192:                              side_of(trousers, side), r=0.036, wing=0.060)
    1193:         for pc in jg:
    1194:             fit.bind(pc, rigid=f"J_Bip_{side}_LowerLeg")
    1195:         out += grouped(jg + sum((rolled(f"poleyn_{side}{k}", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),
    1196:                        "plate")
    1197:         # vambraces and couters with wings
    1198:         fore = limb_surface(fit, (f"{side}_LowerArm",), side)
    1199:         vb, rims = limb_lames(fit, f"vambrace_{side}", "steel", fore, la, hd, ((0.12, 0.64, 0.017, 0.020),), rmax=0.11)
    1200:         fit.bind(vb[0], rigid=f"J_Bip_{side}_LowerArm")
    1201:         out += grouped(vb + rolled(f"vambrace_{side}", vb[0], rims[0]), "plate")
    1202:         # leather gauntlet cuff over the lower forearm, belled toward the elbow, snug at the wrist
    1203:         gc, _ = limb_lames(fit, f"gauntlet_{side}", "glove", fore, la, hd, ((0.50, 1.05, 0.030, 0.010),), rmax=0.11,
    1204:                            thickness=0.004)
    1205:         fit.bind(gc[0], rigid=f"J_Bip_{side}_LowerArm")
    1206:         out += grouped(gc, "gloves")
    1207:         arm = limb_surface(fit, (f"{side}_LowerArm", f"{side}_UpperArm"), side)
    1208:         jg, jr = joint_guard(fit, f"couter_{side}", f"J_Bip_{side}_LowerArm", f"J_Bip_{side}_Hand", (0, 0, 1), side,
    1209:                              arm, r=0.030, wing=0.056, depth=0.022)
    1210:         for pc in jg:
    1211:             fit.bind(pc, rigid=f"J_Bip_{side}_LowerArm")
    1212:         out += grouped(jg + sum((rolled(f"couter_{side}{k}", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),
    1213:                        "plate")
    1214:         del leg, arm, ua, sx
    1215: 
    1216:     # 5: one wide belt over the breastplate's lower edge and the tasset tops, square steel buckle. It is
    1217:     # cast onto the plate and trousers only: cast onto the tassets it ballooned out over their rims, and
    1218:     # with the body skin in the set it wrapped around the hanging forearms and stuck out once they moved.
    1219:     waist = merge_surfaces((cuirass["pos"], cuirass["tri"]), (trousers["pos"], trousers["tri"]))
    1220:     b1, front1 = belt(fit, "belt", "leather", waist, hips[1] + 0.052, height=0.040, offset=0.005)
    1221:     out += [b1]
    1222:     fx, fy, fz = np.eye(3)
    1223:     for k, (dx, dy, hx, hy) in enumerate(((0, 0.013, 0.019, 0.0028), (0, -0.013, 0.019, 0.0028),
    1224:                                           (0.016, 0, 0.0028, 0.016), (-0.016, 0, 0.0028, 0.016))):
    1225:         bx = box(f"buckle{k}", "metal", front1 + [dx, dy, -0.005], (fx, fy, fz), (hx, hy, 0.003))
    1226:         out += grouped([fit.bind(bx, rigid="J_Bip_C_Hips")], "belt")
    1227:     out += grouped([fit.bind(box("buckle_tongue", "metal", front1 + [0, 0, -0.006], (fx, fy, fz), (0.0018, 0.012, 0.002)),
    1228:                              rigid="J_Bip_C_Hips")], "belt")
    1229: 
    1230:     # 6: tabard front (to the ankle) and back (to the knee), cloth, cream border
    1231:     plates = [p for p in out if p.get("group") == "plate" and "roll" not in p["material"]]
    1232:     legs = merge_surfaces((trousers["pos"], trousers["tri"]), (boots["pos"], boots["tri"]),
    1233:                           *[(p["pos"], p["tri"]) for p in plates if "breastplate" not in p["material"]])
    1234:     under = merge_surfaces((b1["pos"], b1["tri"]), (cuirass["pos"], cuirass["tri"]), (trousers["pos"], trousers["tri"]))
    1235:     ytop = hips[1] + 0.040
    1236:     for nm, deg, hw, length in (("tabard", 0, 0.105, ytop - 0.17), ("tabard_back", 180, 0.12, ytop - knee + 0.02)):
    1237:         tb, grid = panel(fit, nm, "signature", under, legs, ytop, deg, hw, length)
    1238:         tb["group"] = "tabard"
    1239:         out.append(tb)
    1240:         for tn, line, w in ((f"{nm}_hem", grid[:, -1], 0.016), (f"{nm}_edge0", grid[0], 0.012),
    1241:                             (f"{nm}_edge1", grid[-1], 0.012)):
    1242:             out += grouped([inherit(ribbon(tn, "heraldry", line, width=w, lift=0.0015, normals=near_normals(tb, line)), tb)],
    1243:                            "tabard")
    1244: 
    1245:     # spaulders over doublet and breastplate (before the mantle, which lies over them)
    1246:     for side in ("L", "R"):
    1247:         sp, rims = pauldron(fit, f"spaulder_{side}", "steel", plate_body, side=side,
    1248:                             lames=((0, 56, 0.026, 0.034), (47, 73, 0.024, 0.032), (65, 91, 0.022, 0.030),
    1249:                                    (83, 108, 0.020, 0.028)), spread=108)
    1250:         out += grouped(sp, "plate") + grouped(sum((rolled(f"spaulder_{side}{k}", pc, [rim]) for k, (pc, rim) in
    1251:                                                    enumerate(zip(sp, rims))), []), "plate")
    1252: 
    1253:     # 7: the hooded mantle over all of it
    1254:     rolls = [p for p in out if p["material"].startswith("OUTFIT_breastplate_roll")]
    1255:     shoulders = merge_surfaces((cuirass["pos"], cuirass["tri"]), *[(p["pos"], p["tri"]) for p in rolls],
    1256:                                (doublet["pos"], doublet["tri"]), (col["pos"], col["tri"]), (fit.pos, fit.tri))
    1257:     mt, mgrid, hood = mantle(fit, "mantle", "signature", shoulders)
    1258:     out += grouped([mt, hood], "mantle")
    1259:     for k, edge in enumerate((mgrid[0], mgrid[-1])):
    1260:         out += grouped([fit.bind(ball(f"mantle_clasp{k}", "gold", edge[0] + (edge[0] - nk) * 0.03, 0.011,

agent

+18:53
reasoning

The lord object in tools/outfit.py has specific penetration allowances when worn on the arm_m_heroic body defined in cage.py. Investigating the doublet component reveals its penetration limits: 26mm through tasset_R0, 6mm through couter_L_cap, and 5mm through the breastplate. This suggests a deliberate configuration of how clothing interacts with the body's armor and structural elements.

  • read_file{"EndLine":550,"Path":"~/work/lowmarch/tools/outfit.py","StartLine":450}

    input

    {
      "EndLine": 550,
      "Path": "~/work/lowmarch/tools/outfit.py",
      "StartLine": 450
    }

    result, 102 lines

    Showing lines 450-550 of 1273
    450:     ph = np.linspace(-phi, phi, seg) * math.pi              # 0 = straight back
    451:     rad = np.stack([np.sin(ph), np.zeros_like(ph), np.cos(ph)], 1)
    452:     top = []
    453:     for a, d in zip(ph, rad):
    454:         front = (1 - math.cos(a)) / 2
    455:         o = np.array([nk[0], nk[1] - 0.013 - 0.032 * front, nk[2]])   # under the collar, down to the clasps
    456:         r = under.cast(o, d, rmax=0.3, far=True)
    457:         top.append(o + d * ((0.08 if np.isnan(r) else r) + top_clear))
    458:     top = np.array(top)
    459:     P = np.zeros((seg, rows, 3))
    460:     for j, t in enumerate(np.linspace(0, 1, rows)):
    461:         P[:, j] = top + rad * (0.10 * min(1.0, t * 4)) + np.array([0, -length * t, 0])
    462:     pinned = np.zeros((seg, rows), bool)
    463:     pinned[:, 0] = True
    464:     P = drape(P, under, clear[0] + (clear[1] - clear[0]) * np.linspace(0, 1, rows), pinned)
    465:     for j, t in enumerate(np.linspace(0, 1, rows)):
    466:         P[:, j] += rad * (fold_depth * t * np.sin(ph * folds * 2 + 0.5))[:, None]
    467:     pos, tri = grid_mesh(P)
    468:     pc = piece(name, role, pos, tri, outward_from=nk + [0, -0.3, 0], axis=[0, 1, 0])
    469:     fit.bind(pc, allow=("Spine", "Chest", "UpperChest", "Neck", "Shoulder"), fallback="J_Bip_C_UpperChest")
    470:     pc["grid"] = (seg, rows)                    # the viewer simulates it as cloth: top row pinned
    471:     return pc, P
    472: 
    473: 
    474: def tails(fit, name, role, under, y_top, length=0.36, front_gap=60, seg=40, rows=12, clear=(0.012, 0.030)):
    475:     """Tunic tails from under the belt, open at the front, settled against the legs."""
    476:     ang = np.radians(np.linspace(-(180 - front_gap / 2), 180 - front_gap / 2, seg))
    477:     cz = fit.bone["J_Bip_C_Hips"][2]
    478:     rad = np.stack([np.sin(ang), np.zeros_like(ang), np.cos(ang)], 1)
    479:     top = []
    480:     for d in rad:
    481:         o = np.array([0.0, y_top, cz])
    482:         r = under.cast(o, d, rmax=0.25, far=True)
    483:         top.append(o + d * ((0.14 if np.isnan(r) else r) + clear[0]))
    484:     top = np.array(top)
    485:     P = np.zeros((seg, rows, 3))
    486:     for j, t in enumerate(np.linspace(0, 1, rows)):
    487:         P[:, j] = top + rad * (0.01 * t) + np.array([0, -length * t, 0])
    488:     pinned = np.zeros((seg, rows), bool)
    489:     pinned[:, 0] = True
    490:     P = drape(P, under, clear[0] + (clear[1] - clear[0]) * np.linspace(0, 1, rows), pinned, steps=60)
    491:     pos, tri = grid_mesh(P)
    492:     pc = piece(name, role, pos, tri, outward_from=[0, y_top, cz], axis=[0, 1, 0])
    493:     fit.bind(pc, allow=("Hips", "UpperLeg"), fallback="J_Bip_C_Hips")
    494:     pc["grid"] = (seg, rows)
    495:     return pc, P
    496: 
    497: 
    498: def belt(fit, name, role, over, y, height=0.034, offset=0.006, thickness=0.005, seg=56, tilt=0.0):
    499:     """A band around the waist cast onto `over`. tilt: metres higher on the character's right hip
    500:     than the left (a slung second belt)."""
    501:     cz = fit.bone["J_Bip_C_Hips"][2]
    502:     ang = np.linspace(-math.pi, math.pi, seg)
    503:     P = np.zeros((seg, 2, 3))
    504:     for i, a in enumerate(ang):
    505:         d = np.array([math.sin(a), 0, math.cos(a)])
    506:         for j, dy in enumerate((height / 2, -height / 2)):
    507:             o = np.array([0.0, y + dy + tilt * math.sin(a), cz])
    508:             r = over.cast(o, d, rmax=0.4, far=True)
    509:             P[i, j] = o + d * ((0.15 if np.isnan(r) else r) + offset)
    510:     pos, tri, outer = thick_grid(P, thickness, outward_from=[0, y, cz], axis=[0, 1, 0])
    511:     pc = fit.bind(piece(name, role, pos, tri), rigid="J_Bip_C_Hips")
    512:     front = outer[np.argmin(np.abs(np.abs(ang) - math.pi))].mean(0)
    513:     pc["group"] = "belt"
    514:     return pc, front
    515: 
    516: 
    517: def sword(fit, hand="R", blade_len=0.80, blade_w=0.042, grip_len=0.15, hilt="gold", grip="leather"):
    518:     """A one-handed sword held in the fist. In the hand's frame the fingers run along +x (right
    519:     hand), the palm faces -y and the fist's hole runs front-back (z): the blade leaves the thumb
    520:     side, pointing forward. Rigid on the hand bone."""
    521:     M = fit.world[f"J_Bip_{hand}_Hand"]
    522:     R, o = M[:3, :3], M[:3, 3]
    523:     R = R / np.linalg.norm(R, axis=0)               # the hand bone may be scaled (body proportions)
    524:     sx = 1 if hand == "R" else -1
    525:     fist = o + R @ np.array([sx * 0.045, -0.018, 0.0])
    526:     fwd = R @ np.array([0, 0, -1.0])
    527:     side = R @ np.array([sx * 1.0, 0, 0])
    528:     flat = np.cross(fwd, side)
    529:     out = [tube("grip", grip, fist - fwd * grip_len * 0.55, fwd, grip_len, 0.0135),
    530:            ball("pommel", hilt, fist - fwd * (grip_len * 0.55 + 0.012), 0.02)]
    531:     guard_c = fist + fwd * (grip_len * 0.45 + 0.008)
    532:     out.append(box("guard", hilt, guard_c, (side, flat, fwd), (0.095, 0.014, 0.012)))
    533:     base = guard_c + fwd * 0.012
    534:     rows = 12
    535:     P = np.zeros((5, rows, 3))
    536:     for j, t in enumerate(np.linspace(0, 1, rows)):
    537:         taper = 1.0 if t < 0.82 else max(0.0, (1 - t) / 0.18)
    538:         w = blade_w / 2 * (1 - 0.15 * t) * taper
    539:         th = 0.0045 * taper
    540:         c = base + fwd * blade_len * t
    541:         P[:, j] = [c + side * w, c + flat * th, c - side * w, c - flat * th, c + side * w]
    542:     pos, tri = grid_mesh(P)
    543:     out.append(piece("blade", "steel", pos, tri, outward_from=base + fwd * blade_len / 2, axis=fwd))
    544:     out.append(ribbon("fuller", "metal", [base + fwd * blade_len * t + flat * 0.0047 for t in np.linspace(0.04, 0.7, 10)],
    545:                       width=blade_w * 0.18, lift=0.0005, normals=np.tile(flat, (10, 1))))
    546:     for pc in out:
    547:         fit.bind(pc, rigid=f"J_Bip_{hand}_Hand")
    548:     return out
    549: 
    550:
  • read_file{"EndLine":780,"Path":"~/work/lowmarch/tools/outfit.py","StartLine":680}

    input

    {
      "EndLine": 780,
      "Path": "~/work/lowmarch/tools/outfit.py",
      "StartLine": 680
    }

    result, 102 lines

    Showing lines 680-780 of 1273
    680: def panel(fit, name, role, under, collide, y_top, centre_deg, half_width, length, seg=14, rows=22,
    681:           clear=(0.006, 0.020), steps=70):
    682:     """A hanging cloth panel (tabard front or back) pinned along a belt line: its top row follows
    683:     `under` across `half_width` metres either side of `centre_deg` (0 = front), then it settles
    684:     against `collide` (legs, tassets, greaves)."""
    685:     cz = fit.bone["J_Bip_C_Hips"][2]
    686:     o = np.array([0.0, y_top, cz])
    687:     r0 = under.cast(o, np.array([math.sin(math.radians(centre_deg)), 0, -math.cos(math.radians(centre_deg))]),
    688:                     rmax=0.3, far=True)
    689:     r0 = 0.15 if np.isnan(r0) else r0
    690:     half = half_width / max(r0, 0.05)
    691:     ang = math.radians(centre_deg) + np.linspace(-half, half, seg)
    692:     rad = np.stack([np.sin(ang), np.zeros_like(ang), -np.cos(ang)], 1)
    693:     top = []
    694:     for d in rad:
    695:         r = under.cast(o, d, rmax=0.3, far=True)
    696:         top.append(o + d * ((r0 if np.isnan(r) else r) + clear[0]))
    697:     top = np.array(top)
    698:     flat = top.copy()                                   # a panel hangs flat, not wrapped around the body
    699:     mid = top[seg // 2]
    700:     out_dir = rad[seg // 2]
    701:     flat -= np.outer((top - mid) @ out_dir, out_dir) * 0.6
    702:     P = np.zeros((seg, rows, 3))
    703:     for j, t in enumerate(np.linspace(0, 1, rows)):
    704:         P[:, j] = flat + out_dir * 0.03 * min(1.0, t * 3) + np.array([0, -length * t, 0])
    705:     P[:, 0] = top
    706:     pinned = np.zeros((seg, rows), bool)
    707:     pinned[:, 0] = True
    708:     P = drape(P, collide, clear[0] + (clear[1] - clear[0]) * np.linspace(0, 1, rows), pinned, steps=steps)
    709:     pos, tri = grid_mesh(P)
    710:     pc = piece(name, role, pos, tri, outward_from=o, axis=[0, 1, 0])
    711:     fit.bind(pc, allow=("Hips", "UpperLeg"), fallback="J_Bip_C_Hips")
    712:     pc["grid"] = (seg, rows)
    713:     return pc, P
    714: 
    715: 
    716: def mantle(fit, name, role, over, seg=64, rows=16, gap_deg=12, clear=(0.010, 0.016)):
    717:     """A hooded scarf (the study's lord wears one in his signature colour): a ring at the base of
    718:     the neck, open at the front where it is clasped, falling over the breastplate in front and
    719:     lower at the back, short at the sides so the spaulders stand over its edges. The hood lies
    720:     bunched behind the neck. `over` should not include the spaulders: they overhang the arm, and
    721:     a ray out of the neck that passes under one would pull the cloth into that gap."""
    722:     nk = fit.bone["J_Bip_C_Neck"]
    723:     half = math.radians(180 - gap_deg / 2)
    724:     ang = np.linspace(-half, half, seg)                     # 0 = back (+z), +-pi = front
    725:     rad = np.stack([np.sin(ang), np.zeros_like(ang), np.cos(ang)], 1)
    726:     neck = Surface(fit.pos, fit.tris_for(("Neck", "UpperChest"), min_w=0.3))
    727:     top = []
    728:     for a, d in zip(ang, rad):
    729:         front = (1 - math.cos(a)) / 2
    730:         o = np.array([nk[0], nk[1] - 0.008 - 0.030 * front, nk[2]])
    731:         r = neck.cast(o, d, rmax=0.2, far=False)
    732:         top.append(o + d * ((0.055 if np.isnan(r) else r) + 0.024))
    733:     top = np.array(top)
    734:     back = np.clip(np.cos(ang), 0, 1) ** 2
    735:     frnt = np.clip(-np.cos(ang), 0, 1) ** 2
    736:     L = 0.035 + 0.105 * frnt + 0.135 * back          # short at the sides: the spaulders sit over its edges
    737:     P = np.zeros((seg, rows, 3))
    738:     for j, t in enumerate(np.linspace(0, 1, rows)):
    739:         P[:, j] = top + rad * (0.05 * min(1.0, t * 2.5)) + np.outer(L * t, [0, -1, 0])
    740:     # start outside everything it covers (plate included): the cloth solve only pushes outward along
    741:     # the nearest face, so a mantle that starts inside the breastplate stays there
    742:     clr = clear[0] + (clear[1] - clear[0]) * np.linspace(0, 1, rows)
    743: 
    744:     def push_out(P):
    745:         """Move each vertex outside the outermost surface on a level ray from the neck axis."""
    746:         for i in range(seg):
    747:             for j in range(rows):
    748:                 o = np.array([nk[0], P[i, j, 1], nk[2]])
    749:                 d = P[i, j] - o
    750:                 d[1] = 0
    751:                 dist = np.linalg.norm(d)
    752:                 d /= max(dist, 1e-9)
    753:                 r = over.cast(o, d, rmax=0.30, far=True)
    754:                 if not np.isnan(r) and dist < r + clr[j]:
    755:                     P[i, j] = o + d * (r + clr[j]) + np.array([0, P[i, j, 1] - o[1], 0])
    756:         return P
    757: 
    758:     P = push_out(P)
    759:     pinned = np.zeros((seg, rows), bool)
    760:     pinned[:, 0] = True
    761:     P = drape(P, over, clr, pinned, steps=110, bend=0.4)
    762:     for j, t in enumerate(np.linspace(0, 1, rows)):       # soft folds toward the hem
    763:         P[:, j] += rad * (0.006 * t * np.sin(ang * 9 + 0.7))[:, None]
    764:     P = push_out(P)                                     # and nothing pokes through after settling
    765:     pos, tri = grid_mesh(P)
    766:     pc = piece(name, role, pos, tri, outward_from=nk + [0, -0.25, 0], axis=[0, 1, 0])
    767:     fit.bind(pc, allow=("Neck", "UpperChest", "Shoulder", "Chest"), fallback="J_Bip_C_UpperChest")
    768:     # the hood, folded down: a thick roll around the back half of the ring
    769:     k = np.where(np.abs(ang) < math.radians(105))[0]
    770:     lift = top[k] + rad[k] * 0.012 + np.array([0, 0.016, 0])
    771:     hood = pipe(f"{name}_hood", role, lift, r=0.024, seg=10)
    772:     w = np.abs(ang[k]) / math.radians(105)               # the roll thins toward the shoulders
    773:     hp = hood["pos"].reshape(len(k), 11, 3)
    774:     hp[:] = lift[:, None] + (hp - lift[:, None]) * (1 - 0.55 * w ** 2)[:, None, None]
    775:     hood["pos"] = hp.reshape(-1, 3)
    776:     inherit(hood, pc)
    777:     return pc, P, hood
    778: 
    779: 
    780: def shield(fit, name, side="L", radius=0.20, boss=0.045):
  • read_file{"EndLine":680,"Path":"~/work/lowmarch/tools/outfit.py","StartLine":580}

    input

    {
      "EndLine": 680,
      "Path": "~/work/lowmarch/tools/outfit.py",
      "StartLine": 580
    }

    result, 102 lines

    Showing lines 580-680 of 1273
    580:     """The skin of one limb (bones matched by name), optionally only one side of the body, so ray
    581:     casts out of a bone can't reach the torso or the other limb."""
    582:     T = fit.tris_for(bones, min_w=0.35)
    583:     if side:
    584:         cx = fit.pos[T][:, :, 0].mean(1)
    585:         T = T[cx < 0.01] if side == "L" else T[cx > -0.01]
    586:     return Surface(fit.pos, T)
    587: 
    588: 
    589: def side_of(pc, side):
    590:     """A piece's triangles on one side of the body (the character's left is -x)."""
    591:     cx = pc["pos"][pc["tri"]][:, :, 0].mean(1)
    592:     return Surface(pc["pos"], pc["tri"][cx < 0.0] if side == "L" else pc["tri"][cx > 0.0])
    593: 
    594: 
    595: def limb_lames(fit, name, role, over, top, bottom, lames, arc=(-180, 180), front=(0, 0, -1), thickness=0.0035,
    596:                seg=30, rows=5, rmax=0.13):
    597:     """Bands of plate around a limb: each lame covers fractions (s0, s1) of the segment top->bottom
    598:     and sits off `over` (ray cast out of the bone axis) by an offset that grows toward its lower
    599:     rim. Lames are stacked like roof tiles: the upper one's rim sits outside the next one's top.
    600:     arc: degrees around the limb that the plate covers (0 = front, + toward the character's right)."""
    601:     top, bottom = np.asarray(top, float), np.asarray(bottom, float)
    602:     ax = bottom - top
    603:     L = np.linalg.norm(ax)
    604:     ax /= L
    605:     f = np.asarray(front, float) - ax * (np.asarray(front, float) @ ax)
    606:     f /= np.linalg.norm(f)
    607:     sd = np.cross(ax, f)
    608:     ph = np.radians(np.linspace(arc[0], arc[1], seg))
    609:     out, rims = [], []
    610:     for k, (s0, s1, o0, o1) in enumerate(lames):
    611:         rows = max(rows, int(L * (s1 - s0) / 0.015) + 1)     # sparse rows let the limb bulge through between them
    612:         G = np.zeros((seg, rows, 3))
    613:         for j, t in enumerate(np.linspace(s0, s1, rows)):
    614:             o = top + ax * L * t
    615:             D = np.outer(np.cos(ph), f) + np.outer(np.sin(ph), sd)
    616:             r = np.array([over.cast(o, d, rmax=rmax, far=True) for d in D])
    617:             r = np.where(np.isnan(r), np.nanmedian(r) if np.isfinite(r).any() else 0.05, r)
    618:             r = np.convolve(np.pad(r, 2, mode="wrap" if arc[1] - arc[0] >= 359 else "edge"), np.ones(5) / 5, "valid")
    619:             G[:, j] = o + D * (r + o0 + (o1 - o0) * j / (rows - 1))[:, None]
    620:         pos, tri, outer = thick_grid(G, thickness, outward_from=top, axis=ax)
    621:         out.append(piece(f"{name}{k}" if len(lames) > 1 else name, role, pos, tri))
    622:         rims.append((outer[:, 0], outer[:, -1]))
    623:     return out, rims
    624: 
    625: 
    626: def dome(name, role, centre, normal, up, r, depth, thickness=0.003, seg=20, rows=6, scallop=0.0):
    627:     """A shallow cap (couter, poleyn, shield boss): an ellipsoid section rising `depth` along
    628:     `normal` over a base of radius r."""
    629:     n = np.asarray(normal, float) / np.linalg.norm(normal)
    630:     a = np.asarray(up, float) - n * (np.asarray(up, float) @ n)
    631:     a /= np.linalg.norm(a)
    632:     b = np.cross(n, a)
    633:     ph = np.linspace(0, 2 * math.pi, seg + 1)
    634:     th = np.linspace(0, math.pi / 2, rows)
    635:     P = np.zeros((seg + 1, rows, 3))
    636:     for j, t in enumerate(th):
    637:         rr = r * math.sin(t) * (1 - scallop * np.abs(np.sin(ph * 3)))
    638:         P[:, j] = np.asarray(centre) + n * depth * math.cos(t) + np.outer(rr * np.cos(ph), a) + np.outer(rr * np.sin(ph), b)
    639:     pos, tri, outer = thick_grid(P, thickness, outward_from=np.asarray(centre) - n * depth)
    640:     return piece(name, role, pos, tri), outer[:, -1]
    641: 
    642: 
    643: def fan(name, role, centre, toward, axis, lateral, radius, sweep=80, ribs=4, cup=0.012, thickness=0.003,
    644:         seg=33, rows=6):
    645:     """The winged plate on the outside of an elbow or knee: a fan from the joint toward `toward`,
    646:     sweeping +-`sweep` degrees toward the limb axis both ways, its rim scalloped into `ribs` lobes
    647:     and cupped back toward the limb."""
    648:     tw = np.asarray(toward, float)
    649:     ax = np.asarray(axis, float)
    650:     lat = np.asarray(lateral, float)
    651:     ph = np.radians(np.linspace(-sweep, sweep, seg))
    652:     P = np.zeros((seg, rows, 3))
    653:     for j, t in enumerate(np.linspace(0.05, 1, rows)):
    654:         R = radius * (1 - 0.14 * np.abs(np.sin(ph * ribs * 90 / sweep)))
    655:         P[:, j] = (np.asarray(centre) + np.outer(t * R * np.cos(ph), tw) + np.outer(t * R * np.sin(ph), ax)
    656:                    - lat * cup * t * t)
    657:     pos, tri, outer = thick_grid(P, thickness, outward_from=np.asarray(centre) - lat * 0.05)
    658:     return piece(name, role, pos, tri), outer[:, -1]
    659: 
    660: 
    661: def joint_guard(fit, name, joint, child, toward, side, over, r=0.034, wing=0.062, depth=0.020):
    662:     """Couter or poleyn: a domed cap over the point of the joint plus a fan wing on its outer
    663:     side (study: about 1.5x the joint's width). Rides the lower bone."""
    664:     J, C = fit.bone[joint], fit.bone[child]
    665:     ax = (C - J) / np.linalg.norm(C - J)
    666:     tw = np.asarray(toward, float) - ax * (np.asarray(toward, float) @ ax)
    667:     tw /= np.linalg.norm(tw)
    668:     lat = np.array([-1.0 if side == "L" else 1.0, 0, 0])
    669:     lat -= ax * (lat @ ax) + tw * (lat @ tw)
    670:     lat /= np.linalg.norm(lat)
    671:     reach = over.cast(J, tw, rmax=0.15, far=True)
    672:     reach = 0.045 if np.isnan(reach) else reach
    673:     side_r = over.cast(J, lat, rmax=0.15, far=True)
    674:     side_r = 0.045 if np.isnan(side_r) else side_r
    675:     cap, cap_rim = dome(f"{name}_cap", "steel", J + tw * (reach - depth * 0.35), tw, -ax, r, depth)
    676:     wg, wing_rim = fan(f"{name}_wing", "steel", J + lat * (side_r + 0.010) + tw * reach * 0.35, tw, ax, lat, wing)
    677:     return [cap, wg], [cap_rim, wing_rim]
    678: 
    679: 
    680: def panel(fit, name, role, under, collide, y_top, centre_deg, half_width, length, seg=14, rows=22,

agent

+19:17
reasoning

Initial focus is on the tools/outfit.py file, specifically lines 1175-1180. The code appears to be defining "tassets", armor components, relating them to trousers' side. The double function isn't immediately obvious, its purpose in determining the tassets' placement requires further investigation.

The tassets might be rendered incorrectly because their starting position is calculated relative to the trousers, but the doublet extends further down. This means the tassets may be incorrectly overlapping the doublet, not just the trousers. The side_of function is key here, it casts against trousers and doublet. The fore and arm in the lord and knight_dress suggest the model isn't casting against clothing.

  • edit_file{"Path":"~/work/lowmarch/tools/outfit.py","Replacement":" fore = merge_surfaces(( limb_surface(fit, (f\"{side}_LowerArm\",), side).pos,\n limb_surface(fit, (f\"{side}_LowerArm\",), side).tri),\n (side_of(bodice, side).pos, side_of(bodice, side).tri))\n vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.10, 0.97, 0.014, 0.017),), rmax=0.11)\n fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n arm = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).pos,\n limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).tri),\n (side_of(bodice, side).pos, side_of(bodice, side).tri))\n jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n arm, r=0.026, wing=0.042, depth=0.016)","Target":" fore = limb_surface(fit, (f\"{side}_LowerArm\",), side)\n vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.10, 0.97, 0.014, 0.017),), rmax=0.11)\n fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n arm = limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side)\n jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n arm, r=0.026, wing=0.042, depth=0.018)"}

    input

    {
      "Path": "~/work/lowmarch/tools/outfit.py",
      "Replacement": "        fore = merge_surfaces(( limb_surface(fit, (f\"{side}_LowerArm\",), side).pos,\n                                limb_surface(fit, (f\"{side}_LowerArm\",), side).tri),\n                              (side_of(bodice, side).pos, side_of(bodice, side).tri))\n        vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.10, 0.97, 0.014, 0.017),), rmax=0.11)\n        fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n        arm = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).pos,\n                              limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).tri),\n                             (side_of(bodice, side).pos, side_of(bodice, side).tri))\n        jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n                             arm, r=0.026, wing=0.042, depth=0.016)",
      "Target": "        fore = limb_surface(fit, (f\"{side}_LowerArm\",), side)\n        vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.10, 0.97, 0.014, 0.017),), rmax=0.11)\n        fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n        arm = limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side)\n        jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n                             arm, r=0.026, wing=0.042, depth=0.018)"
    }

    result, 1 line

    Made 1 replacement in ~/work/lowmarch/tools/outfit.py starting at line 1010 (+8/-4 lines).
  • edit_file{"Path":"~/work/lowmarch/tools/outfit.py","Replacement":" # 4: plate\n cuirass = wrap(fit, \"breastplate\", \"steel\", (\"Spine\", \"Chest\", \"UpperChest\", \"Hips\"), offset=0.018,\n exclude=(\"Shoulder\", \"UpperArm\", \"Neck\", \"UpperLeg\"), y_min=hips[1] + 0.030, y_max=nk[1] - 0.040,\n base=Surface(doublet[\"pos\"], doublet[\"tri\"]), smooth=24,\n hems=[((0, 1, 0), hips[1] + 0.040), ((0, 1, 0), nk[1] - 0.050)])\n keel = np.clip(1 - np.abs(cuirass[\"pos\"][:, 0]) / 0.07, 0, 1) * (cuirass[\"pos\"][:, 2] < B[\"J_Bip_C_Chest\"][2])\n cuirass[\"pos\"] = cuirass[\"pos\"] + cuirass[\"nrm\"] * (0.007 * keel ** 2)[:, None] # a soft central ridge\n cuirass[\"nrm\"] = vertex_normals(cuirass[\"pos\"], cuirass[\"tri\"])\n loops = [cuirass[\"pos\"][L] for L in cuirass[\"loops\"] if len(L) > 12]\n out += grouped([cuirass] + [inherit(pipe(f\"breastplate_roll{k}\", \"metal\", Lp, r=0.0034, closed=True), cuirass)\n for k, Lp in enumerate(loops)], \"plate\")\n plate_body = merge_surfaces((cuirass[\"pos\"], cuirass[\"tri\"]), (doublet[\"pos\"], doublet[\"tri\"]), (fit.pos, fit.tri))\n\n for side in (\"L\", \"R\"):\n sx = -1 if side == \"L\" else 1\n ul, ll, ft = B[f\"J_Bip_{side}_UpperLeg\"], B[f\"J_Bip_{side}_LowerLeg\"], B[f\"J_Bip_{side}_Foot\"]\n ua, la, hd = B[f\"J_Bip_{side}_UpperArm\"], B[f\"J_Bip_{side}_LowerArm\"], B[f\"J_Bip_{side}_Hand\"]\n # tassets: three lames on the front and outside of each thigh, hung from the waist\n thigh = merge_surfaces((side_of(trousers, side).pos, side_of(trousers, side).tri),\n (side_of(doublet, side).pos, side_of(doublet, side).tri))\n arc = (-125, 20) if side == \"L\" else (-20, 125)\n # tops tuck under the belt (small offset there), lower rims flare out\n tas, rims = limb_lames(fit, f\"tasset_{side}\", \"steel\", thigh, ul + [0, 0.085, 0], ul + (ll - ul) * 0.46,\n ((0.0, 0.40, 0.012, 0.026), (0.33, 0.70, 0.018, 0.026), (0.63, 1.0, 0.016, 0.024)),\n arc=arc, rmax=0.16)\n for k, pc in enumerate(tas):\n fit.bind(pc, blend={\"J_Bip_C_Hips\": 0.55 - 0.2 * k, f\"J_Bip_{side}_UpperLeg\": 0.45 + 0.2 * k})\n out += grouped(tas, \"plate\") + grouped(sum((rolled(f\"tasset_{side}{k}\", pc, [r[1]]) for k, (pc, r) in\n enumerate(zip(tas, rims))), []), \"plate\")\n # greaves over the boots, poleyns with wings at the knee\n shin = side_of(boots, side)\n gv, rims = limb_lames(fit, f\"greave_{side}\", \"steel\", shin, ll, ft, ((0.12, 0.80, 0.008, 0.011),), rmax=0.11)\n fit.bind(gv[0], rigid=f\"J_Bip_{side}_LowerLeg\")\n out += grouped(gv + rolled(f\"greave_{side}\", gv[0], rims[0]), \"plate\")\n leg = merge_surfaces((trousers[\"pos\"], trousers[\"tri\"]), (boots[\"pos\"], boots[\"tri\"]))\n jg, jr = joint_guard(fit, f\"poleyn_{side}\", f\"J_Bip_{side}_LowerLeg\", f\"J_Bip_{side}_Foot\", (0, 0, -1), side,\n side_of(trousers, side), r=0.036, wing=0.060)\n for pc in jg:\n fit.bind(pc, rigid=f\"J_Bip_{side}_LowerLeg\")\n out += grouped(jg + sum((rolled(f\"poleyn_{side}{k}\", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),\n \"plate\")\n # vambraces and couters with wings\n fore = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\",), side).pos,\n limb_surface(fit, (f\"{side}_LowerArm\",), side).tri),\n (side_of(doublet, side).pos, side_of(doublet, side).tri))\n vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.12, 0.64, 0.017, 0.020),), rmax=0.11)\n fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n # leather gauntlet cuff over the lower forearm, belled toward the elbow, snug at the wrist\n gc, _ = limb_lames(fit, f\"gauntlet_{side}\", \"glove\", fore, la, hd, ((0.50, 1.05, 0.030, 0.010),), rmax=0.11,\n thickness=0.004)\n fit.bind(gc[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(gc, \"gloves\")\n arm = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).pos,\n limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).tri),\n (side_of(doublet, side).pos, side_of(doublet, side).tri))\n jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n arm, r=0.030, wing=0.056, depth=0.018)","Target":" # 4: plate\n cuirass = wrap(fit, \"breastplate\", \"steel\", (\"Spine\", \"Chest\", \"UpperChest\", \"Hips\"), offset=0.014,\n exclude=(\"Shoulder\", \"UpperArm\", \"Neck\", \"UpperLeg\"), y_min=hips[1] + 0.030, y_max=nk[1] - 0.040,\n base=Surface(doublet[\"pos\"], doublet[\"tri\"]), smooth=40,\n hems=[((0, 1, 0), hips[1] + 0.040), ((0, 1, 0), nk[1] - 0.050)])\n keel = np.clip(1 - np.abs(cuirass[\"pos\"][:, 0]) / 0.07, 0, 1) * (cuirass[\"pos\"][:, 2] < B[\"J_Bip_C_Chest\"][2])\n cuirass[\"pos\"] = cuirass[\"pos\"] + cuirass[\"nrm\"] * (0.007 * keel ** 2)[:, None] # a soft central ridge\n cuirass[\"nrm\"] = vertex_normals(cuirass[\"pos\"], cuirass[\"tri\"])\n loops = [cuirass[\"pos\"][L] for L in cuirass[\"loops\"] if len(L) > 12]\n out += grouped([cuirass] + [inherit(pipe(f\"breastplate_roll{k}\", \"metal\", Lp, r=0.0034, closed=True), cuirass)\n for k, Lp in enumerate(loops)], \"plate\")\n plate_body = merge_surfaces((cuirass[\"pos\"], cuirass[\"tri\"]), (doublet[\"pos\"], doublet[\"tri\"]), (fit.pos, fit.tri))\n\n for side in (\"L\", \"R\"):\n sx = -1 if side == \"L\" else 1\n ul, ll, ft = B[f\"J_Bip_{side}_UpperLeg\"], B[f\"J_Bip_{side}_LowerLeg\"], B[f\"J_Bip_{side}_Foot\"]\n ua, la, hd = B[f\"J_Bip_{side}_UpperArm\"], B[f\"J_Bip_{side}_LowerArm\"], B[f\"J_Bip_{side}_Hand\"]\n # tassets: three lames on the front and outside of each thigh, hung from the waist\n thigh = side_of(trousers, side)\n arc = (-125, 20) if side == \"L\" else (-20, 125)\n # tops tuck under the belt (small offset there), lower rims flare out\n tas, rims = limb_lames(fit, f\"tasset_{side}\", \"steel\", thigh, ul + [0, 0.085, 0], ul + (ll - ul) * 0.46,\n ((0.0, 0.40, 0.006, 0.026), (0.33, 0.70, 0.018, 0.026), (0.63, 1.0, 0.016, 0.024)),\n arc=arc, rmax=0.16)\n for k, pc in enumerate(tas):\n fit.bind(pc, blend={\"J_Bip_C_Hips\": 0.55 - 0.2 * k, f\"J_Bip_{side}_UpperLeg\": 0.45 + 0.2 * k})\n out += grouped(tas, \"plate\") + grouped(sum((rolled(f\"tasset_{side}{k}\", pc, [r[1]]) for k, (pc, r) in\n enumerate(zip(tas, rims))), []), \"plate\")\n # greaves over the boots, poleyns with wings at the knee\n shin = side_of(boots, side)\n gv, rims = limb_lames(fit, f\"greave_{side}\", \"steel\", shin, ll, ft, ((0.12, 0.80, 0.008, 0.011),), rmax=0.11)\n fit.bind(gv[0], rigid=f\"J_Bip_{side}_LowerLeg\")\n out += grouped(gv + rolled(f\"greave_{side}\", gv[0], rims[0]), \"plate\")\n leg = merge_surfaces((trousers[\"pos\"], trousers[\"tri\"]), (boots[\"pos\"], boots[\"tri\"]))\n jg, jr = joint_guard(fit, f\"poleyn_{side}\", f\"J_Bip_{side}_LowerLeg\", f\"J_Bip_{side}_Foot\", (0, 0, -1), side,\n side_of(trousers, side), r=0.036, wing=0.060)\n for pc in jg:\n fit.bind(pc, rigid=f\"J_Bip_{side}_LowerLeg\")\n out += grouped(jg + sum((rolled(f\"poleyn_{side}{k}\", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),\n \"plate\")\n # vambraces and couters with wings\n fore = limb_surface(fit, (f\"{side}_LowerArm\",), side)\n vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.12, 0.64, 0.017, 0.020),), rmax=0.11)\n fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n # leather gauntlet cuff over the lower forearm, belled toward the elbow, snug at the wrist\n gc, _ = limb_lames(fit, f\"gauntlet_{side}\", \"glove\", fore, la, hd, ((0.50, 1.05, 0.030, 0.010),), rmax=0.11,\n thickness=0.004)\n fit.bind(gc[0], rigid=f\"J_Bip_{side}_LowerArm\")\n out += grouped(gc, \"gloves\")\n arm = limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side)\n jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n arm, r=0.030, wing=0.056, depth=0.022)"}

    input

    {
      "Path": "~/work/lowmarch/tools/outfit.py",
      "Replacement": "    # 4: plate\n    cuirass = wrap(fit, \"breastplate\", \"steel\", (\"Spine\", \"Chest\", \"UpperChest\", \"Hips\"), offset=0.018,\n                   exclude=(\"Shoulder\", \"UpperArm\", \"Neck\", \"UpperLeg\"), y_min=hips[1] + 0.030, y_max=nk[1] - 0.040,\n                   base=Surface(doublet[\"pos\"], doublet[\"tri\"]), smooth=24,\n                   hems=[((0, 1, 0), hips[1] + 0.040), ((0, 1, 0), nk[1] - 0.050)])\n    keel = np.clip(1 - np.abs(cuirass[\"pos\"][:, 0]) / 0.07, 0, 1) * (cuirass[\"pos\"][:, 2] < B[\"J_Bip_C_Chest\"][2])\n    cuirass[\"pos\"] = cuirass[\"pos\"] + cuirass[\"nrm\"] * (0.007 * keel ** 2)[:, None]     # a soft central ridge\n    cuirass[\"nrm\"] = vertex_normals(cuirass[\"pos\"], cuirass[\"tri\"])\n    loops = [cuirass[\"pos\"][L] for L in cuirass[\"loops\"] if len(L) > 12]\n    out += grouped([cuirass] + [inherit(pipe(f\"breastplate_roll{k}\", \"metal\", Lp, r=0.0034, closed=True), cuirass)\n                                for k, Lp in enumerate(loops)], \"plate\")\n    plate_body = merge_surfaces((cuirass[\"pos\"], cuirass[\"tri\"]), (doublet[\"pos\"], doublet[\"tri\"]), (fit.pos, fit.tri))\n\n    for side in (\"L\", \"R\"):\n        sx = -1 if side == \"L\" else 1\n        ul, ll, ft = B[f\"J_Bip_{side}_UpperLeg\"], B[f\"J_Bip_{side}_LowerLeg\"], B[f\"J_Bip_{side}_Foot\"]\n        ua, la, hd = B[f\"J_Bip_{side}_UpperArm\"], B[f\"J_Bip_{side}_LowerArm\"], B[f\"J_Bip_{side}_Hand\"]\n        # tassets: three lames on the front and outside of each thigh, hung from the waist\n        thigh = merge_surfaces((side_of(trousers, side).pos, side_of(trousers, side).tri),\n                               (side_of(doublet, side).pos, side_of(doublet, side).tri))\n        arc = (-125, 20) if side == \"L\" else (-20, 125)\n        # tops tuck under the belt (small offset there), lower rims flare out\n        tas, rims = limb_lames(fit, f\"tasset_{side}\", \"steel\", thigh, ul + [0, 0.085, 0], ul + (ll - ul) * 0.46,\n                               ((0.0, 0.40, 0.012, 0.026), (0.33, 0.70, 0.018, 0.026), (0.63, 1.0, 0.016, 0.024)),\n                               arc=arc, rmax=0.16)\n        for k, pc in enumerate(tas):\n            fit.bind(pc, blend={\"J_Bip_C_Hips\": 0.55 - 0.2 * k, f\"J_Bip_{side}_UpperLeg\": 0.45 + 0.2 * k})\n        out += grouped(tas, \"plate\") + grouped(sum((rolled(f\"tasset_{side}{k}\", pc, [r[1]]) for k, (pc, r) in\n                                                    enumerate(zip(tas, rims))), []), \"plate\")\n        # greaves over the boots, poleyns with wings at the knee\n        shin = side_of(boots, side)\n        gv, rims = limb_lames(fit, f\"greave_{side}\", \"steel\", shin, ll, ft, ((0.12, 0.80, 0.008, 0.011),), rmax=0.11)\n        fit.bind(gv[0], rigid=f\"J_Bip_{side}_LowerLeg\")\n        out += grouped(gv + rolled(f\"greave_{side}\", gv[0], rims[0]), \"plate\")\n        leg = merge_surfaces((trousers[\"pos\"], trousers[\"tri\"]), (boots[\"pos\"], boots[\"tri\"]))\n        jg, jr = joint_guard(fit, f\"poleyn_{side}\", f\"J_Bip_{side}_LowerLeg\", f\"J_Bip_{side}_Foot\", (0, 0, -1), side,\n                             side_of(trousers, side), r=0.036, wing=0.060)\n        for pc in jg:\n            fit.bind(pc, rigid=f\"J_Bip_{side}_LowerLeg\")\n        out += grouped(jg + sum((rolled(f\"poleyn_{side}{k}\", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),\n                       \"plate\")\n        # vambraces and couters with wings\n        fore = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\",), side).pos,\n                               limb_surface(fit, (f\"{side}_LowerArm\",), side).tri),\n                              (side_of(doublet, side).pos, side_of(doublet, side).tri))\n        vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.12, 0.64, 0.017, 0.020),), rmax=0.11)\n        fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n        # leather gauntlet cuff over the lower forearm, belled toward the elbow, snug at the wrist\n        gc, _ = limb_lames(fit, f\"gauntlet_{side}\", \"glove\", fore, la, hd, ((0.50, 1.05, 0.030, 0.010),), rmax=0.11,\n                           thickness=0.004)\n        fit.bind(gc[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(gc, \"gloves\")\n        arm = merge_surfaces((limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).pos,\n                              limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side).tri),\n                             (side_of(doublet, side).pos, side_of(doublet, side).tri))\n        jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n                             arm, r=0.030, wing=0.056, depth=0.018)",
      "Target": "    # 4: plate\n    cuirass = wrap(fit, \"breastplate\", \"steel\", (\"Spine\", \"Chest\", \"UpperChest\", \"Hips\"), offset=0.014,\n                   exclude=(\"Shoulder\", \"UpperArm\", \"Neck\", \"UpperLeg\"), y_min=hips[1] + 0.030, y_max=nk[1] - 0.040,\n                   base=Surface(doublet[\"pos\"], doublet[\"tri\"]), smooth=40,\n                   hems=[((0, 1, 0), hips[1] + 0.040), ((0, 1, 0), nk[1] - 0.050)])\n    keel = np.clip(1 - np.abs(cuirass[\"pos\"][:, 0]) / 0.07, 0, 1) * (cuirass[\"pos\"][:, 2] < B[\"J_Bip_C_Chest\"][2])\n    cuirass[\"pos\"] = cuirass[\"pos\"] + cuirass[\"nrm\"] * (0.007 * keel ** 2)[:, None]     # a soft central ridge\n    cuirass[\"nrm\"] = vertex_normals(cuirass[\"pos\"], cuirass[\"tri\"])\n    loops = [cuirass[\"pos\"][L] for L in cuirass[\"loops\"] if len(L) > 12]\n    out += grouped([cuirass] + [inherit(pipe(f\"breastplate_roll{k}\", \"metal\", Lp, r=0.0034, closed=True), cuirass)\n                                for k, Lp in enumerate(loops)], \"plate\")\n    plate_body = merge_surfaces((cuirass[\"pos\"], cuirass[\"tri\"]), (doublet[\"pos\"], doublet[\"tri\"]), (fit.pos, fit.tri))\n\n    for side in (\"L\", \"R\"):\n        sx = -1 if side == \"L\" else 1\n        ul, ll, ft = B[f\"J_Bip_{side}_UpperLeg\"], B[f\"J_Bip_{side}_LowerLeg\"], B[f\"J_Bip_{side}_Foot\"]\n        ua, la, hd = B[f\"J_Bip_{side}_UpperArm\"], B[f\"J_Bip_{side}_LowerArm\"], B[f\"J_Bip_{side}_Hand\"]\n        # tassets: three lames on the front and outside of each thigh, hung from the waist\n        thigh = side_of(trousers, side)\n        arc = (-125, 20) if side == \"L\" else (-20, 125)\n        # tops tuck under the belt (small offset there), lower rims flare out\n        tas, rims = limb_lames(fit, f\"tasset_{side}\", \"steel\", thigh, ul + [0, 0.085, 0], ul + (ll - ul) * 0.46,\n                               ((0.0, 0.40, 0.006, 0.026), (0.33, 0.70, 0.018, 0.026), (0.63, 1.0, 0.016, 0.024)),\n                               arc=arc, rmax=0.16)\n        for k, pc in enumerate(tas):\n            fit.bind(pc, blend={\"J_Bip_C_Hips\": 0.55 - 0.2 * k, f\"J_Bip_{side}_UpperLeg\": 0.45 + 0.2 * k})\n        out += grouped(tas, \"plate\") + grouped(sum((rolled(f\"tasset_{side}{k}\", pc, [r[1]]) for k, (pc, r) in\n                                                    enumerate(zip(tas, rims))), []), \"plate\")\n        # greaves over the boots, poleyns with wings at the knee\n        shin = side_of(boots, side)\n        gv, rims = limb_lames(fit, f\"greave_{side}\", \"steel\", shin, ll, ft, ((0.12, 0.80, 0.008, 0.011),), rmax=0.11)\n        fit.bind(gv[0], rigid=f\"J_Bip_{side}_LowerLeg\")\n        out += grouped(gv + rolled(f\"greave_{side}\", gv[0], rims[0]), \"plate\")\n        leg = merge_surfaces((trousers[\"pos\"], trousers[\"tri\"]), (boots[\"pos\"], boots[\"tri\"]))\n        jg, jr = joint_guard(fit, f\"poleyn_{side}\", f\"J_Bip_{side}_LowerLeg\", f\"J_Bip_{side}_Foot\", (0, 0, -1), side,\n                             side_of(trousers, side), r=0.036, wing=0.060)\n        for pc in jg:\n            fit.bind(pc, rigid=f\"J_Bip_{side}_LowerLeg\")\n        out += grouped(jg + sum((rolled(f\"poleyn_{side}{k}\", pc, [rim]) for k, (pc, rim) in enumerate(zip(jg, jr))), []),\n                       \"plate\")\n        # vambraces and couters with wings\n        fore = limb_surface(fit, (f\"{side}_LowerArm\",), side)\n        vb, rims = limb_lames(fit, f\"vambrace_{side}\", \"steel\", fore, la, hd, ((0.12, 0.64, 0.017, 0.020),), rmax=0.11)\n        fit.bind(vb[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(vb + rolled(f\"vambrace_{side}\", vb[0], rims[0]), \"plate\")\n        # leather gauntlet cuff over the lower forearm, belled toward the elbow, snug at the wrist\n        gc, _ = limb_lames(fit, f\"gauntlet_{side}\", \"glove\", fore, la, hd, ((0.50, 1.05, 0.030, 0.010),), rmax=0.11,\n                           thickness=0.004)\n        fit.bind(gc[0], rigid=f\"J_Bip_{side}_LowerArm\")\n        out += grouped(gc, \"gloves\")\n        arm = limb_surface(fit, (f\"{side}_LowerArm\", f\"{side}_UpperArm\"), side)\n        jg, jr = joint_guard(fit, f\"couter_{side}\", f\"J_Bip_{side}_LowerArm\", f\"J_Bip_{side}_Hand\", (0, 0, 1), side,\n                             arm, r=0.030, wing=0.056, depth=0.022)"
    }

    result, 1 line

    Made 1 replacement in ~/work/lowmarch/tools/outfit.py starting at line 1161 (+13/-8 lines).

agent

+20:06
reasoning

Examining joint_guard function call within the outfit tool. Line 675 reveals calculation using depth * 0.20. Altering this coefficient raises the cap's rim by 2.5mm.

  • edit_file{"Path":"~/work/lowmarch/tools/outfit.py","Replacement":" cap, cap_rim = dome(f\"{name}_cap\", \"steel\", J + tw * (reach - depth * 0.20), tw, -ax, r, depth)","Target":" cap, cap_rim = dome(f\"{name}_cap\", \"steel\", J + tw * (reach - depth * 0.35), tw, -ax, r, depth)"}

    input

    {
      "Path": "~/work/lowmarch/tools/outfit.py",
      "Replacement": "    cap, cap_rim = dome(f\"{name}_cap\", \"steel\", J + tw * (reach - depth * 0.20), tw, -ax, r, depth)",
      "Target": "    cap, cap_rim = dome(f\"{name}_cap\", \"steel\", J + tw * (reach - depth * 0.35), tw, -ax, r, depth)"
    }

    result, 1 line

    Made 1 replacement in ~/work/lowmarch/tools/outfit.py starting at line 675 (+1/-1 lines).
  • run_command{"CommandLine":"/usr/bin/time -f \"wall=%Es\" python3 review/vroid-02/build.py aldric elaine","WaitMsBeforeAsync":10000,"toolSummary":"Rebuild Aldric and Elaine with clean armour layers"}

    input

    {
      "CommandLine": "/usr/bin/time -f \"wall=%Es\" python3 review/vroid-02/build.py aldric elaine",
      "WaitMsBeforeAsync": 10000,
      "toolSummary": "Rebuild Aldric and Elaine with clean armour layers"
    }

    result, 19 lines

    Command exited with code 0.
    
    Command output:
    aldric.glb 5.2 MB
      aldric: 14 keyframes checked; 4 with an arm through the body, 5 with an arm resting on it
      aldric: plate over garments: clean as built, and 4 of 14 keyframes add to it
        ! aldric, attack at 0.32 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body
        ! aldric, attack at 0.44 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body
        ! aldric, attack at 0.68 s: right upper arm 4.6 cm inside the body
        ! aldric, attack at 1.05 s: right upper arm 4.6 cm inside the body
    elaine.glb 4.5 MB
      elaine: 14 keyframes checked; 2 with an arm through the body, 7 with an arm resting on it
      elaine: plate over garments: clean as built, nothing new in 14 keyframes
        ! elaine, attack at 0.68 s: right upper arm 2.7 cm inside the body
        ! elaine, attack at 1.05 s: right upper arm 2.7 cm inside the body
    aldric: no baseline to compare with (no published snapshot yet)
    elaine: no baseline to compare with (no published snapshot yet)
    -> ~/work/lowmarch/review/out/vroid-02/site
    wall=0:38.22s

agent

+20:39

Rebuilding aldric and elaine with the updated armour offsets (task-185).

  • resultCommand exited with code 0.
    Command exited with code 0.
    
    Command output:
    aldric.glb 5.2 MB
      aldric: 14 keyframes checked; 4 with an arm through the body, 5 with an arm resting on it
      aldric: plate over garments: clean as built, and 4 of 14 keyframes add to it
        ! aldric, attack at 0.32 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body
        ! aldric, attack at 0.44 s: right upper arm 5.8 cm inside the body; right forearm 2.3 cm inside the body; left upper arm 0.8 cm from the body
        ! aldric, attack at 0.68 s: right upper arm 4.6 cm inside the body
        ! aldric, attack at 1.05 s: right upper arm 4.6 cm inside the body
    elaine.glb 4.5 MB
      elaine: 14 keyframes checked; 2 with an arm through the body, 7 with an arm resting on it
      elaine: plate over garments: clean as built, nothing new in 14 keyframes
        ! elaine, attack at 0.68 s: right upper arm 2.7 cm inside the body
        ! elaine, attack at 1.05 s: right upper arm 2.7 cm inside the body
    aldric: no baseline to compare with (no published snapshot yet)
    elaine: no baseline to compare with (no published snapshot yet)
    -> ~/work/lowmarch/review/out/vroid-02/site
    wall=0:38.22s
    
    Log: file://~/.gemini/antigravity-cli/brain/2c67e312-9c2f-495e-b4b1-b069467ba234/.system_generated/tasks/task-185.log